ISL8487IB-T vs ISL8488IP مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ISL8487IB-T بواسطة Renesas Electronics و ISL8488IP بواسطة Renesas Electronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ISL8487IB-T | ISL8488IP |
|---|---|---|
| العلامة التجارية | Renesas Electronics | Renesas Electronics |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | NRND |
| Transceiver Configuration | 1/1 Transceiver Half | — |
| Supported Standards | RS-422 and RS-485 | — |
| جهد التغذية | 5 V | 5 V |
| Bus Unit Load | 1/4 Unit Load | — |
| Communication Mode | Half Duplex | — |
| ESD Protection | ESD Protected | — |
| Power Class | Low Power | Low power |
| Slew Rate | High Speed or Slew Rate Limited | Slew-rate limited |
| العلبة | 8-SOIC, 0.154 in (3.90 mm) Width | 8-pin plastic DIP (8-PDIP) |
| نوع التركيب | Surface Mount | Through-hole |
| عدد الدبابيس | 8 Pins | — |
| Manufacturer | Renesas Electronics Corporation | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum Data Rate | [DATA_NEEDED: Maximum data rate] | 250 kbps |
| Receiver Sensitivity | [DATA_NEEDED: Receiver sensitivity] | [DATA_NEEDED: receiver sensitivity] |
| Driver Output Current | [DATA_NEEDED: Driver output current] | — |
| Quiescent Supply Current | [DATA_NEEDED: Quiescent supply current] | — |
| Common Mode Voltage | [DATA_NEEDED: Common-mode voltage range] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Duplex Mode | — | Full duplex |
| Supported Standards/Interfaces | — | RS-485 and RS-422 |
| Driver Configuration | — | 1/1 transceiver |
| Transmit Enable | — | No dedicated transmit-enable pin |
| Receive Enable | — | No dedicated receive-enable pin |
| Lead-Free Status | — | RoHS non-compliant |
| تيار التغذية | — | [DATA_NEEDED: supply current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Maximum Driver Output Voltage | — | [DATA_NEEDED: maximum driver output voltage] |
| ESD Rating | — | [DATA_NEEDED: ESD rating] |
| Termination | — | [DATA_NEEDED: termination requirements] |