ISL8487IB-T vs ISL8488IP 比較
詳細な並列比較: ISL8487IB-T メーカー: Renesas Electronics および ISL8488IP メーカー: Renesas Electronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ISL8487IB-T | ISL8488IP |
|---|---|---|
| ブランド | Renesas Electronics | Renesas Electronics |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | NRND |
| Transceiver Configuration | 1/1 Transceiver Half | — |
| Supported Standards | RS-422 and RS-485 | — |
| 電源電圧 | 5 V | 5 V |
| Bus Unit Load | 1/4 Unit Load | — |
| Communication Mode | Half Duplex | — |
| ESD Protection | ESD Protected | — |
| Power Class | Low Power | Low power |
| Slew Rate | High Speed or Slew Rate Limited | Slew-rate limited |
| パッケージ | 8-SOIC, 0.154 in (3.90 mm) Width | 8-pin plastic DIP (8-PDIP) |
| 実装タイプ | Surface Mount | Through-hole |
| ピン数 | 8 Pins | — |
| Manufacturer | Renesas Electronics Corporation | — |
| 動作温度範囲 | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum Data Rate | [DATA_NEEDED: Maximum data rate] | 250 kbps |
| Receiver Sensitivity | [DATA_NEEDED: Receiver sensitivity] | [DATA_NEEDED: receiver sensitivity] |
| Driver Output Current | [DATA_NEEDED: Driver output current] | — |
| Quiescent Supply Current | [DATA_NEEDED: Quiescent supply current] | — |
| Common Mode Voltage | [DATA_NEEDED: Common-mode voltage range] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Duplex Mode | — | Full duplex |
| Supported Standards/Interfaces | — | RS-485 and RS-422 |
| Driver Configuration | — | 1/1 transceiver |
| Transmit Enable | — | No dedicated transmit-enable pin |
| Receive Enable | — | No dedicated receive-enable pin |
| Lead-Free Status | — | RoHS non-compliant |
| 電源電流 | — | [DATA_NEEDED: supply current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Maximum Driver Output Voltage | — | [DATA_NEEDED: maximum driver output voltage] |
| ESD Rating | — | [DATA_NEEDED: ESD rating] |
| Termination | — | [DATA_NEEDED: termination requirements] |