ISO1042DWVR vs ISO1042BDWV مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ISO1042DWVR بواسطة Texas Instruments و ISO1042BDWV بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
ISO1042DWVR - 5 Mbps Reinforced Isolated CAN | Texas Instruments (Tape & Reel)
ISO1042DWVR ✓ نشطTexas Instruments
ISO1042BDWV - Isolated CAN FD Transceiver 5Mbps 70V | TI (Tape & Reel)
ISO1042BDWV ✓ نشطمقارنة المواصفات
| المعامل | ISO1042DWVR | ISO1042BDWV |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| سعر الوحدة (USD) | — | $1.58 |
| Product Type | Digitally isolated CAN transceiver | Isolated CAN transceiver |
| Classic CAN Data Rate | 1 Mbps | — |
| CAN FD Data Rate | 5 Mbps | — |
| Loop Delay | 152 ns | 152 ns |
| DC Bus Fault Protection | ±70 V | — |
| Common-Mode Voltage Range | ±30 V | — |
| Isolation Withstand Voltage | 5000 VRMS | — |
| CAN Physical-Layer Standard | ISO 11898-2:2016 | — |
| Isolation Type | Reinforced | Basic isolation, capacitive barrier |
| العلبة | 8-pin wide-body SOIC (DWV) | 8-pin SOIC (DWV), wide body |
| عدد الأطراف | 8 pins | — |
| نوع التركيب | Surface mount | Surface Mount |
| Evaluation Module | ISO1042DWVREVM | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Protocol | — | CAN / CAN FD (ISO11898-2 2016) |
| معدل البيانات | — | Up to 5 Mbps (flexible data rate) |
| Bus Fault Protection | — | 70 V |
| Working Isolation Voltage | — | 1060 Vrms |
| Logic-Side Supply Range (VCC1) | — | 1.8 V to 5.5 V |
| Bus-Side Supply Range (VCC2) | — | [DATA_NEEDED: bus-side supply range] |
| ESD Protection (Bus Pins) | — | +/-16 kV HBM |
| Duplex | — | Half duplex, 1 driver / 1 receiver |
| درجة حرارة التشغيل | — | -40C to +125C |
| Protection Features | — | Thermal shutdown, bus fault protection |