ISO1042DWVR vs ISO1042BDWV Comparaison
Comparaison détaillée côte à côte de ISO1042DWVR par Texas Instruments et ISO1042BDWV par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1042DWVR - 5 Mbps Reinforced Isolated CAN | Texas Instruments (Tape & Reel)
ISO1042DWVR ✓ ActifTexas Instruments
ISO1042BDWV - Isolated CAN FD Transceiver 5Mbps 70V | TI (Tape & Reel)
ISO1042BDWV ✓ ActifComparaison des spécifications
| Paramètre | ISO1042DWVR | ISO1042BDWV |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Prix unitaire (USD) | — | $1,58 |
| Product Type | Digitally isolated CAN transceiver | Isolated CAN transceiver |
| Classic CAN Data Rate | 1 Mbps | — |
| CAN FD Data Rate | 5 Mbps | — |
| Loop Delay | 152 ns | 152 ns |
| DC Bus Fault Protection | ±70 V | — |
| Common-Mode Voltage Range | ±30 V | — |
| Isolation Withstand Voltage | 5000 VRMS | — |
| CAN Physical-Layer Standard | ISO 11898-2:2016 | — |
| Isolation Type | Reinforced | Basic isolation, capacitive barrier |
| Boîtier | 8-pin wide-body SOIC (DWV) | 8-pin SOIC (DWV), wide body |
| Nombre de broches | 8 pins | — |
| Type de montage | Surface mount | Surface Mount |
| Evaluation Module | ISO1042DWVREVM | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Protocol | — | CAN / CAN FD (ISO11898-2 2016) |
| Débit de données | — | Up to 5 Mbps (flexible data rate) |
| Bus Fault Protection | — | 70 V |
| Working Isolation Voltage | — | 1060 Vrms |
| Logic-Side Supply Range (VCC1) | — | 1.8 V to 5.5 V |
| Bus-Side Supply Range (VCC2) | — | [DATA_NEEDED: bus-side supply range] |
| ESD Protection (Bus Pins) | — | +/-16 kV HBM |
| Duplex | — | Half duplex, 1 driver / 1 receiver |
| Température de fonctionnement | — | -40C to +125C |
| Protection Features | — | Thermal shutdown, bus fault protection |