ISO1412DW vs ADM2461EBRWZ-RL مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ISO1412DW بواسطة Texas Instruments و ADM2461EBRWZ-RL بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ نشطمقارنة المواصفات
| المعامل | ISO1412DW | ADM2461EBRWZ-RL |
|---|---|---|
| العلامة التجارية | Texas Instruments | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | 1/1 isolated full-duplex transceiver | Isolated RS-485 / RS-422 Transceiver |
| Supported Standards | TIA/EIA-485 and TIA/EIA-422 | — |
| Maximum Data Rate | 500 kbps | 500 kbps |
| Isolation Voltage | 5 kVrms | — |
| Isolation Configuration | Galvanically isolated | — |
| Communication Mode | Full duplex | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| نوع الواجهة | RS-485 and RS-422 | — |
| EMC Protection | Robust EMC protection | — |
| العلبة | 16-SOIC | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Manufacturer Package Code | DW | — |
| نوع التركيب | Surface mount | Surface Mount |
| Evaluation Module | ISO1412DWEVM | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Transmitter Output Current | [DATA_NEEDED: transmitter output current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| ESD Protection Level | [DATA_NEEDED: ESD protection level] | — |
| EFT Protection Level | [DATA_NEEDED: EFT protection level] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half Duplex |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Common-Mode Voltage Range | — | -25 V to +25 V |
| درجة حرارة التشغيل | — | -40C to +85C |
| مستوى MSL | — | 3 |