ISO1412DW vs ADM2461EBRWZ-RL Comparaison
Comparaison détaillée côte à côte de ISO1412DW par Texas Instruments et ADM2461EBRWZ-RL par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ ActifComparaison des spécifications
| Paramètre | ISO1412DW | ADM2461EBRWZ-RL |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | 1/1 isolated full-duplex transceiver | Isolated RS-485 / RS-422 Transceiver |
| Supported Standards | TIA/EIA-485 and TIA/EIA-422 | — |
| Maximum Data Rate | 500 kbps | 500 kbps |
| Isolation Voltage | 5 kVrms | — |
| Isolation Configuration | Galvanically isolated | — |
| Communication Mode | Full duplex | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Type d'interface | RS-485 and RS-422 | — |
| EMC Protection | Robust EMC protection | — |
| Boîtier | 16-SOIC | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Manufacturer Package Code | DW | — |
| Type de montage | Surface mount | Surface Mount |
| Evaluation Module | ISO1412DWEVM | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Transmitter Output Current | [DATA_NEEDED: transmitter output current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| ESD Protection Level | [DATA_NEEDED: ESD protection level] | — |
| EFT Protection Level | [DATA_NEEDED: EFT protection level] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half Duplex |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Common-Mode Voltage Range | — | -25 V to +25 V |
| Température de fonctionnement | — | -40C to +85C |
| Niveau MSL | — | 3 |