KSZ8061RNBW vs KSZ8041RNL مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ KSZ8061RNBW بواسطة Microchip Technology و KSZ8041RNL بواسطة Microchip Technology. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | KSZ8061RNBW | KSZ8041RNL |
|---|---|---|
| العلامة التجارية | Microchip Technology | Microchip Technology |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | 10/100BASE-TX Ethernet physical-layer transceiver | 10BASE-T/100BASE-TX physical-layer transceiver |
| Supported Data Rates | 10 Mb/s and 100 Mb/s | — |
| Channel Count | 1 channel | — |
| Duplex Mode | Full duplex | — |
| جهد التغذية | 3.3 V | — |
| Cable Medium | Unshielded twisted-pair cable | — |
| العلبة | 32-pin VQFN, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 mm x 5 mm |
| نوع التركيب | Surface mount | Surface mount |
| Internal Filtering | Quiet-WIRE internal filtering | — |
| Ethernet Standards | 10BASE-T and 100BASE-TX | — |
| Integrated Magnetics | [DATA_NEEDED: integrated magnetics] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Transmit Current | [DATA_NEEDED: transmit current] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| Junction Temperature | [DATA_NEEDED: junction temperature] | — |
| Pin Configuration | [DATA_NEEDED: complete 32-pin configuration] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Ethernet Data Rate | — | 10 Mb/s and 100 Mb/s |
| Host Interface | — | Full RMII |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage Range | — | 3.135 V to 3.465 V |
| Supply Configuration | — | Single supply |
| Input Reference Clock | — | 25 MHz crystal |
| RMII Reference Output | — | 50 MHz to the media access controller |
| External 50 MHz System Clock | — | Not required for the RNL version |
| Lead-Free Package Option | — | Yes, 32-pin lead-free QFN package |
| Power-Down Configuration | — | Configurable through power-up strapping |
| Speed and Duplex Configuration | — | Configurable through power-up strapping |
| Auto-Negotiation Configuration | — | Configurable through power-up strapping |
| PHY Address Configuration | — | Configurable through power-up strapping |
| Ethernet Magnetics | — | External 10/100BASE-TX magnetic isolation required |