KSZ8061RNBW - 10/100 Ethernet PHY | Microchip | 32-QFN
MPN: KSZ8061RNBW ✓ نشطKSZ8061RNBW نظرة عامة
An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, is the interface between a network controller and physical copper cable. The PHY belongs to the Ethernet interface IC hierarchy, where a link-layer controller transfers frames through the PHY to a 10/100BASE-TX network. Its primary roles are line coding, signal shaping, receive equalization, link detection, and recovery of valid data from the physical medium.
The KSZ8061 offers two supported Ethernet speeds, 10 Mb/s and 100 Mb/s, in a compact 32-QFN package measuring 5 x 5 mm. It operates from a 3.3 V supply and incorporates Quiet-WIRE internal filtering, a Microchip feature intended to reduce line noise and improve signal quality in network equipment. These characteristics make the device suitable for compact Ethernet endpoints that require 10/100BASE-TX connectivity without a separate magnetics-based implementation.
The KSZ8061 family integrates the physical-layer functions required for transmission and reception over unshielded twisted-pair media. Full-duplex operation is supported, while internal Quiet-WIRE filtering addresses unwanted signal content on the line. The small 5 x 5 mm QFN footprint supports dense equipment layouts, but its exposed thermal and electrical requirements still demand careful PCB planning and controlled layout of high-speed differential nets.
Typical uses include industrial Ethernet controllers, embedded network equipment, network interface cards, print servers, IP cameras, and compact communications equipment. In these systems, the KSZ8061 provides the physical copper interface while an Ethernet MAC or communications controller handles frame processing. Designers should pair it with suitable magnetics or an integrated network interface arrangement and implement a manufacturer-recommended 100-ohm differential transmission environment.
PCB implementation requires short, symmetric differential routing from the PHY to the network connector or magnetics, continuous reference planes, controlled impedance, and unobstructed return paths. Decoupling capacitors should be connected close to the supply and ground pins. Differential pair routing, isolation from noisy switching circuitry, and verification with Ethernet compliance testing are more important than raw component count when achieving reliable 100BASE-TX performance.
This product page organizes the KSZ8061RNBW specifications, application guidance, verified source links, and carefully scoped replacement information. It also identifies the electrical, package, lifecycle, and pin-level details that should be confirmed in the manufacturer datasheet before schematic release or PCB layout.
بدائل مباشرة لـ KSZ8061RNBW — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع KSZ8061RNBW (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type, Supply Voltage.
KSZ8041RNL
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←KSZ8061RNBW المواصفات
| Product Type | 10/100BASE-TX Ethernet physical-layer transceiver |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Channel Count | 1 channel |
| Duplex Mode | Full duplex |
| جهد التغذية | 3.3 V |
| Cable Medium | Unshielded twisted-pair cable |
| العلبة | 32-pin VQFN, 5 x 5 mm |
| نوع التركيب | Surface mount |
| Internal Filtering | Quiet-WIRE internal filtering |
| Ethernet Standards | 10BASE-T and 100BASE-TX |
دليل تكوين أطراف KSZ8061RNBW 32-pin vqfn, 5 x 5 mm
تكوين الأطراف لـ KSZ8061RNBW (حزمة 32-pin vqfn, 5 x 5 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ KSZ8061RNBW.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
KSZ8061RNBW مناسب لـ 6 التطبيقs: Industrial Ethernet Gateway, Embedded Network Interface Card, IP Camera Network Interface, Print Server Connectivity, Network Communications Equipment, Compact Automation Controller.
Industrial Ethernet Gateway
The KSZ8061RNBW fits an industrial Ethernet gateway that must connect an embedded controller to a 10/100BASE-TX network. Its 10 Mb/s and 100 Mb/s support covers legacy and Fast Ethernet plant networks, while the 3.3 V operation simplifies integration with modern embedded processors. The 32-pin 5 x 5 mm QFN package preserves board area near the network connector. Quiet-WIRE internal filtering can reduce unwanted line signal content, but industrial qualification still requires confirmation of the exact temperature grade, surge exposure, isolation strategy, and enclosure grounding before production release.
موصى به
Embedded Network Interface Card
An embedded network interface card can use the KSZ8061RNBW as the physical interface between a communications controller and twisted-pair Ethernet. The device provides separate 10BASE-T and 100BASE-TX operation in a compact 32-QFN package, allowing a shared controller design to support both Fast Ethernet and 10 Mb/s links. Designers should provide a stable 3.3 V rail, place decoupling close to the PHY, and route the differential pair as a controlled-impedance net. External magnetics or the manufacturer’s supported integrated interface arrangement remain important choices for isolation and compliance.
موصى به
IP Camera Network Interface
The KSZ8061RNBW is appropriate for the Ethernet connection stage of an IP camera or similar compact vision endpoint. A 100 Mb/s link supports image transport at the physical layer, while 10 Mb/s support provides compatibility with slower management networks. The 5 x 5 mm QFN footprint is useful where board space is constrained, and Quiet-WIRE filtering helps manage unwanted signal content on copper media. The design must still protect the PHY from camera power-supply noise and route the Ethernet differential pair without stubs or impedance discontinuities.
موصى به
Print Server Connectivity
A print server can use the KSZ8061RNBW to connect a network controller or embedded system to 10BASE-T or 100BASE-TX infrastructure. Supporting both rates improves deployment flexibility across legacy and modern office networks, while full-duplex operation supports simultaneous data transfer and control traffic. The 3.3 V device and compact 32-QFN package fit densely populated embedded controller boards. Layout should isolate the PHY from switching regulators and motors, preserve a continuous ground reference, and follow the manufacturer’s recommended Ethernet magnetics and termination arrangement.
موصى به
Network Communications Equipment
The KSZ8061RNBW can serve as the copper-media interface in network communications equipment with a 10/100 Mb/s link. Its full-duplex PHY operation and Quiet-WIRE internal filtering suit equipment that must preserve signal quality between a MAC and unshielded twisted-pair cabling. The 5 x 5 mm QFN package permits placement close to the connector and magnetics, reducing board area and helping maintain differential routing quality. Confirm operating temperature, supply limits, exposed-pad treatment, and all digital timing constraints in the manufacturer datasheet before qualifying the equipment.
موصى به
Compact Automation Controller
A compact automation controller can use the KSZ8061RNBW when it requires wired Ethernet connectivity without occupying a large package area. Supporting both 10 Mb/s and 100 Mb/s allows the controller to operate across older and faster network segments, while the 3.3 V supply matches many embedded processor platforms. In a factory environment, the PHY should be positioned away from switching power stages and high-current traces. Validate temperature range, conducted-noise behavior, network isolation, and surge requirements for the intended installation class.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ KSZ8061RNBW — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | KSZ8041RNL |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 32-QFN, 5 x 5 mm | 32-QFN |
| Product Type | 10/100BASE-TX Ethernet PHY | Ethernet PHY |
| Supported Data Rates | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s |
| Channel Count | 1 channel | 1 channel |
| Duplex Mode | Full duplex | Full duplex |
| Pin Count | 32 pins | 32 pins |
أبرز الفروقات
- Quiet-WIRE internal filtering in the selected family (مقابلKSZ8041RNL)
- Direct 10/100BASE-TX PHY function in a compact package (مقابلKSZ8041RNL)
- Single-chip Ethernet physical-layer integration (مقابلKSZ8041RNL)
ملاحظات التصميم
Route the Ethernet differential pair as a short, balanced, continuously referenced network with no test pads, stubs, or plane discontinuities. Keep the PHY close to the magnetics or connector and use the manufacturer’s 32-QFN land pattern exactly. Place input and output decoupling capacitors close to their associated supply and ground pins. Do not substitute a generic QFN-32 footprint without checking exposed-pad dimensions and pin-one orientation.
Use the manufacturer’s recommended Ethernet trace impedance and magnetics or integrated-interface topology. Quiet-WIRE filtering does not compensate for poor physical-layer construction: unequal differential lengths, nearby switching-current paths, oversized vias, or an interrupted reference plane can degrade the 100 Mb/s link. Validate the completed board for differential impedance, insertion loss, return loss, and conducted emissions using the applicable Ethernet test procedure.
Do not assign signals from a generic 32-QFN symbol. The KSZ8061RNBW pin names, exposed-pad connection, configuration straps, reset behavior, and supply requirements must be taken from the manufacturer pin-description table. Also verify the correct ordering code and tray or reel option. An apparently identical QFN-32 outline can have different pin assignments or thermal-pad requirements, making schematic and footprint review essential before PCB release.
Provide adequate copper and thermal relief beneath the exposed pad while following the manufacturer land-pattern guidance. The 3.3 V supply and 10/100BASE-TX operating class do not imply that thermal limits can be ignored; actual dissipation depends on the complete operating mode and surrounding PCB construction. Estimate worst-case junction temperature from device dissipation and the effective thermal resistance of the final board, then verify it under maximum ambient temperature.
معلومات الامتثال
The exact MPN compliance declarations require confirmation from the Microchip product page or material declaration. AEC-Q100 is not applicable because the KSZ8061RNBW is an Ethernet interface IC rather than an automotive-qualified device designation in the available product information.