KSZ8895FMQTR vs KSZ8895FQXI مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ KSZ8895FMQTR بواسطة Microchip Technology و KSZ8895FQXI بواسطة Microchip Technology. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Microchip Technology
KSZ8895FMQTR - 5-Port 10/100 Managed Ethernet Switch | Microchip (Tape & Reel)
KSZ8895FMQTR ✓ نشطMicrochip Technology
KSZ8895FQXI - 5-Port 10/100 Managed Ethernet Switch | Microchip Technology
KSZ8895FQXI ✓ نشطمقارنة المواصفات
| المعامل | KSZ8895FMQTR | KSZ8895FQXI |
|---|---|---|
| العلامة التجارية | Microchip Technology | Microchip Technology |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Integrated 5-port Layer 2 managed Ethernet switch | Managed Layer 2 Ethernet switch |
| Number of Ethernet Ports | 5 ports | 5 ports |
| Ethernet Data Rate | 10/100 Mbps per port | — |
| Physical Layer | 10/100BASE-T/TX PHY | — |
| Media Type | Copper Ethernet | — |
| Host Interface | MII and RMII | MII and RMII |
| Switching Layer | Layer 2 | — |
| Management | Managed switch | — |
| Automotive Qualification | Automotive qualified | Automotive qualified |
| العلبة | 128-pin PQFP, 14 x 20 mm | 128-pin PQFP, 14 mm x 20 mm |
| نوع التركيب | Surface mount | Surface mount |
| Power Architecture | Low-power integrated switch with advanced power management | — |
| Quality of Service | Four-queue prioritization | — |
| Rate Control | Programmable rate limit and priority ratio | — |
| Spanning Tree Support | Rapid Spanning Tree Protocol (RSTP) | — |
| Packet Filtering | Multiple packet filters | — |
| Termination | On-chip termination | — |
| حالة RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 qualification details] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supported Ethernet Speeds | — | 10 Mb/s and 100 Mb/s |
| Integrated PHY Configuration | — | 5 integrated 10BASE-T/100BASE-TX PHYs |
| Operating Voltage | — | 3.3 V |
| Network Layer | — | Layer 2 |
| 10BASE-T Driver Integration | — | 10BASE-T driver incorporated into the 100BASE-T driver |
| 10BASE-T Output Amplitude | — | 2.3 V typical |
| Output Wave Shaping | — | Internally wave-shaped |
| Output Pre-emphasis | — | Internally pre-emphasized |
| RJ45 Transmit Channel Termination | — | 75 ohm in series with a 1000 pF, 2 kV capacitor to chassis ground |
| Maximum Total Port Current | — | [DATA_NEEDED: maximum total port current] |
| Typical Transceiver Current | — | [DATA_NEEDED: typical transceiver current] |
| Junction Temperature | — | [DATA_NEEDED: maximum junction temperature] |