KSZ9031RNXCC vs KSZ9031RNXUB-VAO مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ KSZ9031RNXCC بواسطة Microchip Technology و KSZ9031RNXUB-VAO بواسطة Microchip Technology. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Microchip Technology
KSZ9031RNXUB-VAO - Gigabit Ethernet Transceiver, AEC-Q100, WQFN-48 | Microchip
KSZ9031RNXUB-VAO ✓ نشطمقارنة المواصفات
| المعامل | KSZ9031RNXCC | KSZ9031RNXUB-VAO |
|---|---|---|
| العلامة التجارية | Microchip Technology | Microchip Technology |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Ethernet Physical Layer Transceiver (PHY) | Ethernet Physical Layer Transceiver (PHY) |
| معدل البيانات | 10 / 100 / 1000 Mbps (triple-speed) | 10/100/1000 Mbps (triple-speed) |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) | — |
| MAC Interface | RGMII (Version 2.0 compliant, on-chip delay) | RGMII (Reduced Gigabit Media Independent Interface) |
| Cable Interface | 4 differential pairs, CAT-5 UTP, 100-ohm differential | — |
| Management Interface | MDIO / MDC (IEEE 802.3 clause 22/45) | — |
| Supply Voltage (Analog/DVDD) | 3.3 V | — |
| Core Supply | 1.2 V (on-chip LDO controller + external MOSFET) | — |
| On-chip Features | Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction | — |
| Power Saving | Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode | — |
| العلبة | 48-pin QFN (7x7 mm) | 48-pin WQFN (7x7 mm), lead-free |
| نوع التركيب | Surface Mount | Surface Mount |
| درجة حرارة التشغيل | 0C to +70C (commercial grade, CC suffix) | -40C to +85C (automotive AEC-Q100 grade) |
| مستوى MSL | 3 | — |
| حالة RoHS | Compliant | Compliant |
| Standards Supported | — | 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) |
| Cable Type | — | CAT-5 UTP (unshielded twisted pair) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| جهد التغذية | — | [DATA_NEEDED: supply voltage] |
| Power Consumption (Active) | — | [DATA_NEEDED: typical active power] |
| Power Consumption (Energy-Detect) | — | ~75 mW when cable not attached |
| Reference Clock Output | — | 125 MHz |
| Wake-on-LAN | — | Yes, with custom-packet detection |
| On-chip Termination Resistors | — | Yes (integrated MDI termination) |
| LED Outputs | — | Programmable (link/activity/speed) |
| Loopback Modes | — | Remote and local loopback |
| Baseline Wander Correction | — | Integrated |
| Adaptive Equalization | — | Integrated |
| Lead-Free | — | Yes |