L272AM vs L272D013TR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ L272AM بواسطة onsemi و L272D013TR بواسطة STMicroelectronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | L272AM | L272D013TR |
|---|---|---|
| العلامة التجارية | onsemi | STMicroelectronics |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Dual high-power operational amplifier | — |
| Amplifier Channel Count | 2 channels | — |
| أقصى تيار خرج | 0.7 A | — |
| العلبة | 8-DIP through-hole package | 16-pin SO, 3.90 mm width |
| Manufacturer | onsemi | — |
| Supported Load Type | Low-impedance loads | — |
| Series | L272A | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Offset Current | [DATA_NEEDED: input offset current] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 4 V to 28 V |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1 V/µs |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | 250 kHz |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Type | — | Dual power operational amplifier |
| Number of Circuits | — | 2 circuits |
| Output Current | — | 0.7 A maximum per amplifier |
| نوع التركيب | — | Surface mount |
| Application Category | — | General-purpose power amplifier |
| Intended Load | — | Low-impedance loads |
| Output Architecture | — | Power operational amplifier |
| المقاومة الحرارية | — | [DATA_NEEDED: package thermal resistance] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing Voltage | — | [DATA_NEEDED: output swing voltage] |