LM2903QDRQ1 vs LM2903BQDRQ1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LM2903QDRQ1 بواسطة Texas Instruments و LM2903BQDRQ1 بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
LM2903QDRQ1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903QDRQ1 ✓ نشطTexas Instruments
LM2903BQDRQ1 - Dual Rail-to-Rail Comparator | Texas Instruments
LM2903BQDRQ1 ✓ نشطمقارنة المواصفات
| المعامل | LM2903QDRQ1 | LM2903BQDRQ1 |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 | 2 channels |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 |
| Single-Supply Operating Range | 2 V to 36 V | — |
| Dual-Supply Operating Range | Total supply difference of 2 V to 36 V | — |
| تيار التغذية | 0.4 mA per comparator | [DATA_NEEDED: supply current] |
| Input Offset Voltage | 2 mV typical | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| نوع الخرج | Open collector | Open-collector |
| Logic Compatibility | Compatible with TTL, MOS, and CMOS | — |
| العلبة | 8-pin SOIC | SOIC (D), 8 pins |
| نوع التركيب | Surface mount | Surface mount |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS status] | — |
| Input Common-Mode Range | — | Rail-to-rail |
| Supply Voltage Range | — | ±18 V or 36 V total |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| Improved ESD Performance | — | 2 kV |
| Offset Voltage | — | [DATA_NEEDED: offset voltage] |