LM2903QDRQ1 vs LM2903BQDRQ1 Comparación
Comparación detallada lado a lado de LM2903QDRQ1 por Texas Instruments y LM2903BQDRQ1 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
LM2903QDRQ1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903QDRQ1 ✓ ActivoTexas Instruments
LM2903BQDRQ1 - Dual Rail-to-Rail Comparator | Texas Instruments
LM2903BQDRQ1 ✓ ActivoComparación de especificaciones
| Parámetro | LM2903QDRQ1 | LM2903BQDRQ1 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 | 2 channels |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 |
| Single-Supply Operating Range | 2 V to 36 V | — |
| Dual-Supply Operating Range | Total supply difference of 2 V to 36 V | — |
| Corriente de alimentación | 0.4 mA per comparator | [DATA_NEEDED: supply current] |
| Input Offset Voltage | 2 mV typical | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Tipo de salida | Open collector | Open-collector |
| Logic Compatibility | Compatible with TTL, MOS, and CMOS | — |
| Encapsulado | 8-pin SOIC | SOIC (D), 8 pins |
| Tipo de montaje | Surface mount | Surface mount |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS status] | — |
| Input Common-Mode Range | — | Rail-to-rail |
| Supply Voltage Range | — | ±18 V or 36 V total |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| Improved ESD Performance | — | 2 kV |
| Offset Voltage | — | [DATA_NEEDED: offset voltage] |