LT1037CL vs LT1037CP مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LT1037CL بواسطة Texas Instruments و LT1037CP بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | LT1037CL | LT1037CP |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | Unknown | نشط |
| Product Type | Single operational amplifier | Low-noise, high-speed, precision operational amplifier |
| Amplifier Category | Instrumentation, op amp, buffer amp | — |
| Number of Circuits | 1 circuit | — |
| العلبة | TO-99-8 | 8-pin PDIP |
| Gain-Bandwidth Product | 60 MHz | 60 MHz |
| Wideband Input Noise | 2.5 nV/√Hz | — |
| 1/f Corner Frequency | 2 Hz | 2 Hz |
| 0.1 Hz to 10 Hz Peak-to-Peak Noise | 60 nV | — |
| Offset Voltage | 10 µV | — |
| Offset Voltage Drift | 0.2 µV/°C | — |
| Common-Mode Rejection | 130 dB | 130 dB |
| Power-Supply Rejection | 130 dB | 130 dB |
| Closed-Loop Stability | Stable for closed-loop gains of 5 or greater | — |
| Frequency Response | Up to 8 MHz | — |
| Input Offset Voltage Maximum | 110 µV | — |
| نوع التركيب | Through-hole | Through-hole |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Amplifiers | — | 1 amplifier |
| Slew Rate | — | 11 V/µs minimum for LT1037 and LT1037A |
| Input Noise Density | — | 2.5 nV/√Hz wideband |
| Maximum Equivalent Input Noise Voltage | — | 3.8 nV/√Hz at 1 kHz |
| Low-Frequency Noise | — | 60 nV peak-to-peak from 0.1 Hz to 10 Hz |
| Input Offset Voltage | — | 10 µV |
| Input Offset Voltage Drift | — | 0.2 µV/°C |
| Typical Differential Voltage Gain | — | 20 V/µV at 25°C, 2 kΩ load, ±12 V |
| Differential Gain at 600 Ω Load | — | 12 V/µV at 25°C, ±10 V |
| Stable Closed-Loop Gain | — | 5 V/V or greater |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |