LT1039CJ vs MAX211CDB مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ LT1039CJ بواسطة Analog Devices و MAX211CDB بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | LT1039CJ | MAX211CDB |
|---|---|---|
| العلامة التجارية | Analog Devices | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | Unknown | نشط |
| Product Type | Triple EIA-232 line transceiver | Multichannel RS-232 line driver/receiver |
| Number of Drivers | 3 | — |
| Number of Receivers | 3 | — |
| جهد التغذية | Up to ±15 V | 5 V |
| Receiver Input Voltage | ±30 V | — |
| Driver Output Voltage | RS-232 levels; outputs can be driven to ±30 V without damage | — |
| Receiver Input Impedance | 30 kΩ nominal | — |
| Receiver Input Hysteresis | 0.4 V | — |
| Shutdown Output State | High impedance | — |
| Power-Off Output State | High impedance when V+ and V− are 0 V | — |
| Driver Logic Input | TTL logic input | — |
| Receiver Logic Output | TTL or CMOS compatible | — |
| Short Circuit Protection | Fully short-circuit protected outputs | — |
| العلبة | 18-pin DIP | 28-pin SSOP, 5.30 mm width |
| Temperature Grade | [DATA_NEEDED: operating temperature range] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| نوع التركيب | Through-hole | Surface mount |
| Supplier Case | DIP18 | — |
| Driver Count | — | 4 |
| Receiver Count | — | 5 |
| Maximum Data Rate | — | 120 kbit/s |
| Driver Output Swing | — | ±9 V |
| RS-232 Bus Pin ESD Protection | — | ±15 kV, human-body model |
| Standards Support | — | TIA/EIA-232-F and ITU V.28 |
| Shutdown Feature | — | Three driver outputs can be placed in shutdown |
| Power-Supply Topology | — | Single 5 V supply with integrated charge-pump circuitry |
| نطاق درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |
| تيار التغذية | — | [DATA_NEEDED: operating supply current] |
| Shutdown Supply Current | — | Low; exact value [DATA_NEEDED: shutdown supply current] |
| Driver Input Logic Levels | — | [DATA_NEEDED: driver input logic thresholds] |
| Receiver Output Logic Levels | — | [DATA_NEEDED: receiver output logic levels] |