LT1039CJ vs MAX211CDB 비교
다음의 상세 나란히 비교: LT1039CJ 제조: Analog Devices 및 MAX211CDB 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LT1039CJ | MAX211CDB |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | Unknown | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $10.99 | $3.23 |
| Product Type | Triple EIA-232 line transceiver | Multichannel RS-232 line driver/receiver |
| Number of Drivers | 3 | — |
| Number of Receivers | 3 | — |
| 공급 전압 | Up to ±15 V | 5 V |
| Receiver Input Voltage | ±30 V | — |
| Driver Output Voltage | RS-232 levels; outputs can be driven to ±30 V without damage | — |
| Receiver Input Impedance | 30 kΩ nominal | — |
| Receiver Input Hysteresis | 0.4 V | — |
| Shutdown Output State | High impedance | — |
| Power-Off Output State | High impedance when V+ and V− are 0 V | — |
| Driver Logic Input | TTL logic input | — |
| Receiver Logic Output | TTL or CMOS compatible | — |
| Short Circuit Protection | Fully short-circuit protected outputs | — |
| 패키지 | 18-pin DIP | 28-pin SSOP, 5.30 mm width |
| Temperature Grade | [DATA_NEEDED: operating temperature range] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 실장 유형 | Through-hole | Surface mount |
| Supplier Case | DIP18 | — |
| Driver Count | — | 4 |
| Receiver Count | — | 5 |
| Maximum Data Rate | — | 120 kbit/s |
| Driver Output Swing | — | ±9 V |
| RS-232 Bus Pin ESD Protection | — | ±15 kV, human-body model |
| Standards Support | — | TIA/EIA-232-F and ITU V.28 |
| Shutdown Feature | — | Three driver outputs can be placed in shutdown |
| Power-Supply Topology | — | Single 5 V supply with integrated charge-pump circuitry |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | — | [DATA_NEEDED: operating supply current] |
| Shutdown Supply Current | — | Low; exact value [DATA_NEEDED: shutdown supply current] |
| Driver Input Logic Levels | — | [DATA_NEEDED: driver input logic thresholds] |
| Receiver Output Logic Levels | — | [DATA_NEEDED: receiver output logic levels] |