MAX3483EESA+T vs MAX3483ESA+T مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX3483EESA+T بواسطة Analog Devices و MAX3483ESA+T بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Analog Devices
MAX3483EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+T ✓ نشطمقارنة المواصفات
| المعامل | MAX3483EESA+T | MAX3483ESA+T |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| جهد التغذية | 3.3 V | 3.3 V |
| جهد التغذية التشغيلي | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating for exact suffix] |
| Driver Type | Slew-rate-limited true driver | Slew-rate-limited true differential driver |
| Supported Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| العلبة | 8-pin NSOIC | 8-SOIC, 8 pins |
| عدد الأطراف | 8 pins | — |
| نوع التركيب | Surface mount | Surface mount |
| تيار التغذية | [DATA_NEEDED: supply current] | [DATA_NEEDED: operating supply current] |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Documented Low-Rate Operation | — | Up to 250 kbps |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Communication Mode | — | Half-duplex |
| Standards Supported | — | RS-485 and RS-422 |
| Disabled Output State | — | High impedance |
| Controls | — | Driver Enable and Receiver Enable |
| درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |