MAX3483EESA+T vs MAX3483ESA+T 비교

다음의 상세 나란히 비교: MAX3483EESA+T 제조: Analog Devices 및 MAX3483ESA+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
MAX3483ESA+T MAX3483ESA+T - 3.3V RS-485/RS-422 Transceiver | ADI

MAX3483ESA+T - 3.3V RS-485/RS-422 Transceiver | ADI

MAX3483ESA+T ✓ 활성

사양 비교

파라미터 MAX3483EESA+T MAX3483ESA+T
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Transceiver Configuration 1 driver and 1 receiver —
공급 전압 3.3 V 3.3 V
동작 공급 전압 3 V to 3.6 V —
Maximum Data Rate 12 Mbps 10 Mbps
ESD Protection ±15 kV [DATA_NEEDED: ESD protection rating for exact suffix]
Driver Type Slew-rate-limited true driver Slew-rate-limited true differential driver
Supported Standards RS-485 and RS-422 —
Duplex Mode Half-duplex —
패키지 8-pin NSOIC 8-SOIC, 8 pins
핀 수 8 pins —
실장 유형 Surface mount Surface mount
공급 전류 [DATA_NEEDED: supply current] [DATA_NEEDED: operating supply current]
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Propagation Delay [DATA_NEEDED: propagation delay] —
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Documented Low-Rate Operation — Up to 250 kbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Communication Mode — Half-duplex
Standards Supported — RS-485 and RS-422
Disabled Output State — High impedance
Controls — Driver Enable and Receiver Enable
동작 온도 — [DATA_NEEDED: operating temperature range]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청