MAX3488CPA+ vs MAX3488EPA+ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX3488CPA+ بواسطة Maxim Integrated و MAX3488EPA+ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | MAX3488CPA+ | MAX3488EPA+ |
|---|---|---|
| العلامة التجارية | Maxim Integrated | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| جهد التغذية | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | 1 driver |
| Receiver Count | 1 | 1 receiver |
| Interface Standards | RS-485 and RS-422 | — |
| Slew Rate | Slew-rate limited | — |
| Logic Compatibility | +5 V logic interoperable | — |
| العلبة | 8-pin PDIP | 8-pin PDIP |
| نوع التركيب | Through-hole | Through-hole |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3.0 V to 3.6 V |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| تيار السكون | [DATA_NEEDED: quiescent current] | — |
| Driver Enable Control | [DATA_NEEDED: enable-control configuration] | — |
| Receiver Output Logic | [DATA_NEEDED: receiver output logic] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | [DATA_NEEDED: ESD protection rating] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| معدل البيانات | — | 10 Mbps |
| Standards | — | RS-422 and RS-485 |
| Slew-Rate Limiting | — | Yes |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Supply Current | — | [DATA_NEEDED: receiver supply current] |
| Termination | — | External termination required according to bus design |