MAX3488CPA+ vs MAX3488EPA+ 比較
詳細並排比較 MAX3488CPA+ 由 Maxim Integrated 與 MAX3488EPA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX3488CPA+ | MAX3488EPA+ |
|---|---|---|
| 品牌 | Maxim Integrated | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| 供應電壓 | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | 1 driver |
| Receiver Count | 1 | 1 receiver |
| Interface Standards | RS-485 and RS-422 | — |
| Slew Rate | Slew-rate limited | — |
| Logic Compatibility | +5 V logic interoperable | — |
| 封裝 | 8-pin PDIP | 8-pin PDIP |
| 安裝類型 | Through-hole | Through-hole |
| 工作溫度 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3.0 V to 3.6 V |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| 靜態電流 | [DATA_NEEDED: quiescent current] | — |
| Driver Enable Control | [DATA_NEEDED: enable-control configuration] | — |
| Receiver Output Logic | [DATA_NEEDED: receiver output logic] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | [DATA_NEEDED: ESD protection rating] |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| 資料速率 | — | 10 Mbps |
| Standards | — | RS-422 and RS-485 |
| Slew-Rate Limiting | — | Yes |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Supply Current | — | [DATA_NEEDED: receiver supply current] |
| Termination | — | External termination required according to bus design |