MAX3490CSA+ vs SN75176 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX3490CSA+ بواسطة Analog Devices و SN75176 بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ نشطمقارنة المواصفات
| المعامل | MAX3490CSA+ | SN75176 |
|---|---|---|
| العلامة التجارية | Analog Devices | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-422/RS-485 interface transceiver | — |
| جهد التغذية | 3.3 V | — |
| معدل البيانات | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-422 and RS-485 | — |
| Driver Type | Slew-rate-limited true RS-485/RS-422 driver | — |
| العلبة | 8-pin SOIC | 8-pin PDIP (P) |
| نوع التركيب | Surface Mount | Through-Hole |
| Communication Mode | Differential | — |
| Network Capability | RS-422 point-to-point and RS-485 multipoint | — |
| Power Consumption | [DATA_NEEDED: quiescent current and supply current] | — |
| Common-Mode Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: output current] | ±60 mA (max) |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Termination | External network termination required for RS-485 applications | — |
| حالة RoHS | [DATA_NEEDED: RoHS compliance] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | not_applicable | — |
| الوظيفة | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| درجة حرارة التشغيل | — | 0 °C to +70 °C |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |