MAX3490CSA+ vs SN75176 तुलना
विस्तृत दोनों ओर की तुलना MAX3490CSA+ द्वारा Analog Devices और SN75176 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3490CSA+ | SN75176 |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-422/RS-485 interface transceiver | — |
| सप्लाई वोल्टेज | 3.3 V | — |
| डेटा दर | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-422 and RS-485 | — |
| Driver Type | Slew-rate-limited true RS-485/RS-422 driver | — |
| पैकेज | 8-pin SOIC | 8-pin PDIP (P) |
| माउंटिंग प्रकार | Surface Mount | Through-Hole |
| Communication Mode | Differential | — |
| Network Capability | RS-422 point-to-point and RS-485 multipoint | — |
| Power Consumption | [DATA_NEEDED: quiescent current and supply current] | — |
| Common-Mode Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: output current] | ±60 mA (max) |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Termination | External network termination required for RS-485 applications | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | not_applicable | — |
| फ़ंक्शन | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| ऑपरेटिंग तापमान | — | 0 °C to +70 °C |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |