MC9S08PA16AVTJ vs MC9S08PT16VTJ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MC9S08PA16AVTJ بواسطة NXP Semiconductors و MC9S08PT16VTJ بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | MC9S08PA16AVTJ | MC9S08PT16VTJ |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | NXP Semiconductors |
| الفئة | Microcontrollers | Microcontrollers |
| حالة دورة الحياة | نشط | NRND |
| Core | S08 8-bit CISC core | — |
| Maximum Bus Frequency | 20 MHz | — |
| Flash Memory | 16 KB | — |
| Supply Voltage Range | 2.7 V to 5.5 V | — |
| V-Part Operating Temperature | -40 °C to 105 °C | — |
| M-Part Operating Temperature | -40 °C to 125 °C | — |
| العلبة | 20-pin TSSOP | 20-TSSOP |
| نوع التركيب | Surface Mount | Surface Mount |
| Architecture | 8-bit embedded MCU | — |
| Program Memory Type | Flash | — |
| Application Category | Cost-sensitive automotive embedded control | — |
| Analog Integration | Integrated analog functionality | — |
| Port Drive Control | Software-selectable alternative drive strengths on supported high-current port pins | — |
| Data Bus | Single-chip embedded bus | — |
| Manufacturer | NXP Semiconductors | — |
| حالة دورة الحياة | Active | NRND (Not Recommended for New Designs) |
| Datasheet Revision | MC9S08PA16_Rev.1 | — |
| عدد الأطراف | 20 pins | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Core Architecture | — | S08 (HCS08L) 8-bit CISC |
| Program Memory (Flash) | — | 16 KB (16K x 8) |
| RAM | — | 2 KB |
| EEPROM | — | 256 B |
| Maximum CPU Frequency | — | 20 MHz |
| جهد التغذية | — | 2.7 V to 5.5 V |
| درجة حرارة التشغيل | — | -40 °C to +105 °C |
| Number of I/O | — | 17 (approx., per TSSOP-20) |
| ADC | — | 10-bit, multiple channels |
| Touch Sensing Interface (TSI) | — | Yes, integrated |
| FlexTimer (PWM) | — | Yes, motor-control optimized |
| Communication Interfaces | — | UART, SPI, I2C |
| Interrupt Sources | — | Up to 40 |
| Nested Interrupts | — | Up to 4 levels |
| Debug Interface | — | Background Debug Mode (BDM) |
| Low-Power Modes | — | Run / Wait / Stop (low-uA) |