MPVZ5010G7U vs MPXV4006GC7U مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MPVZ5010G7U بواسطة NXP Semiconductors و MPXV4006GC7U بواسطة STMicroelectronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
STMicroelectronics
MPXV4006GC7U - 6kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPXV4006GC7U ✓ نشطمقارنة المواصفات
| المعامل | MPVZ5010G7U | MPXV4006GC7U |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | STMicroelectronics |
| الفئة | Pressure Sensors | Pressure Sensors |
| حالة دورة الحياة | نشط | نشط |
| Pressure Type | Vented Gauge | Vented Gauge (differential referenced to atmosphere) |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 6 kPa |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| تيار التغذية | 10 mA (maximum) | [DATA_NEEDED: quiescent current] |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | — |
| نوع الخرج | Analog, ratiometric to Vcc | Analog ratiometric |
| Response Time | [DATA_NEEDED: response time ms] | 1 ms (typical) |
| نطاق درجة حرارة التشغيل | 0 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | — |
| العلبة | 8-DIP Module (Case 1368-01, through-hole) | 8-DIP (0.550 in / 13.97 mm), top port |
| نوع التركيب | Through-Hole (DIP module with vent tube) | Through-hole (DIP) |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| مستوى MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | Compliant (per DigiKey part detail) |
| Body Height | 5.46 mm | — |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Output Voltage Span | — | 0.2 V to 4.7 V (typ) |
| جهد التغذية | — | 5 V (typ) |
| Accuracy (0-85 C) | — | ±1.5 %VFSS (typical) |
| Port Style | — | Top-side 3.17 mm (0.13 in) tube inlet |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Pressure Media Compatibility | — | Dry air, non-corrosive gases |
| Lead Free | — | Yes (per NXP/ST product descriptions) |