MPVZ5010G7U vs MPXV4006GC7U 비교

다음의 상세 나란히 비교: MPVZ5010G7U 제조: NXP Semiconductors 및 MPXV4006GC7U 제조: STMicroelectronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

NXP Semiconductors
MPVZ5010G7U MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U ✓ 활성

사양 비교

파라미터 MPVZ5010G7U MPXV4006GC7U
브랜드 NXP Semiconductors STMicroelectronics
카테고리 Pressure Sensors Pressure Sensors
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $7.25 $10.50
Pressure Type Vented Gauge Vented Gauge (differential referenced to atmosphere)
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 kPa to 6 kPa
Supply Voltage (Vcc) 4.75 V to 5.25 V (5 V typical) —
공급 전류 10 mA (maximum) [DATA_NEEDED: quiescent current]
Analog Output Range 0.2 V to 4.7 V —
Accuracy ±1.5 %FS (0 °C to 85 °C) —
출력 유형 Analog, ratiometric to Vcc Analog ratiometric
Response Time [DATA_NEEDED: response time ms] 1 ms (typical)
동작 온도 범위 0 °C to +85 °C [DATA_NEEDED: operating temperature range]
Compensated Temperature Range -10 °C to +60 °C —
Storage Temperature Range -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] —
패키지 8-DIP Module (Case 1368-01, through-hole) 8-DIP (0.550 in / 13.97 mm), top port
실장 유형 Through-Hole (DIP module with vent tube) Through-hole (DIP)
Sensor Technology Piezoresistive silicon micromachined —
Signal Conditioning On-chip, temperature compensated, calibrated —
MSL 레벨 [DATA_NEEDED: MSL rating] [DATA_NEEDED: MSL rating]
RoHS 상태 [DATA_NEEDED: RoHS status] Compliant (per DigiKey part detail)
Body Height 5.46 mm —
Maximum Overpressure — [DATA_NEEDED: maximum overpressure rating]
Output Voltage Span — 0.2 V to 4.7 V (typ)
공급 전압 — 5 V (typ)
Accuracy (0-85 C) — ±1.5 %VFSS (typical)
Port Style — Top-side 3.17 mm (0.13 in) tube inlet
Output Impedance — [DATA_NEEDED: output impedance]
Pressure Media Compatibility — Dry air, non-corrosive gases
Lead Free — Yes (per NXP/ST product descriptions)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청