NE5534DR vs NE5534ADR2G مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ NE5534DR بواسطة Texas Instruments و NE5534ADR2G بواسطة onsemi. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ نشطمقارنة المواصفات
| المعامل | NE5534DR | NE5534ADR2G |
|---|---|---|
| العلامة التجارية | Texas Instruments | onsemi |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Single low-noise operational amplifier | Single low-noise operational amplifier |
| Manufacturer | Texas Instruments | — |
| Number of Circuits | 1 | 1 circuit |
| العلبة | 8-SOIC | 8-SOIC, 3.90 mm width |
| نوع التركيب | Surface Mount | — |
| Total Supply Voltage | 10 V to 30 V | — |
| Equivalent Input Noise Voltage | 3.5 nV/Hz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 dB typical | — |
| Slew Rate | 13 V/us typical | 13 V/us |
| Open-Loop Voltage Gain | 100 V/mV typical | — |
| Supply Configuration | ±5 V to ±15 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical at ±18 V | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | General Purpose |
| Supply Voltage Range | — | 3 V to 20 V |
| Packaging | — | Tape and Reel (TR) |
| Temperature Grade | — | Commercial |
| Noise Performance | — | Low noise |
| Output Drive Capability | — | Improved |
| Small-Signal Bandwidth | — | [DATA_NEEDED: small-signal bandwidth] |
| Power Bandwidth | — | [DATA_NEEDED: power bandwidth] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |