NE5534DR vs NE5534ADR2G Vergleich
Detaillierter Direktvergleich von NE5534DR von Texas Instruments und NE5534ADR2G von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ AktivSpezifikationsvergleich
| Parameter | NE5534DR | NE5534ADR2G |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Single low-noise operational amplifier | Single low-noise operational amplifier |
| Manufacturer | Texas Instruments | — |
| Number of Circuits | 1 | 1 circuit |
| Gehäuse | 8-SOIC | 8-SOIC, 3.90 mm width |
| Montageart | Surface Mount | — |
| Total Supply Voltage | 10 V to 30 V | — |
| Equivalent Input Noise Voltage | 3.5 nV/Hz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 dB typical | — |
| Slew Rate | 13 V/us typical | 13 V/us |
| Open-Loop Voltage Gain | 100 V/mV typical | — |
| Supply Configuration | ±5 V to ±15 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical at ±18 V | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | General Purpose |
| Supply Voltage Range | — | 3 V to 20 V |
| Packaging | — | Tape and Reel (TR) |
| Temperature Grade | — | Commercial |
| Noise Performance | — | Low noise |
| Output Drive Capability | — | Improved |
| Small-Signal Bandwidth | — | [DATA_NEEDED: small-signal bandwidth] |
| Power Bandwidth | — | [DATA_NEEDED: power bandwidth] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |