OPA642PB vs OPA642P مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ OPA642PB بواسطة Texas Instruments و OPA642P بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | OPA642PB | OPA642P |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Wideband, low-distortion, low-gain operational amplifier | Wideband, low-distortion, low-gain operational amplifier |
| Amplifier Architecture | Single voltage-feedback operational amplifier | — |
| Supply Voltage Range | ±4.5 V to ±5.5 V | — |
| Single Supply Equivalent Range | 9 V to 11 V | — |
| Stated Gain Figure | 90 dB | — |
| Operating Current | 25 uA | — |
| تيار السكون | 70 uA | — |
| Number of Circuits | 1 circuit | 1 circuit |
| عدد الدبابيس | 8 pins | — |
| العلبة | 8-pin PDIP, 0.300 inch (7.62 mm) pitch | 8-pin PDIP |
| Terminal Type | Through-hole | — |
| Package Shape | Rectangular | — |
| Temperature Grade | Industrial | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Noise Voltage Density | [DATA_NEEDED: input noise voltage density] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Topology | — | Single voltage-feedback amplifier |
| Gain-Bandwidth Product | — | 400 MHz |
| جهد التغذية | — | ±5.5 V |
| Open-Loop Gain | — | 95 dB |
| Common-Mode Rejection Ratio | — | 90 dB |
| Input Noise Density | — | 2.7 nV/√Hz |
| Low-Distortion Frequency | — | 5 MHz |
| Settling Performance | — | 12-bit settling to 0.01% |
| أقصى تيار خرج | — | ±60 mA |
| عدد الأطراف | — | 8 pins |
| نوع التركيب | — | Through-hole |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |