OPA642PB vs OPA642P Comparaison

Comparaison détaillée côte à côte de OPA642PB par Texas Instruments et OPA642P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
OPA642P OPA642P - 400MHz Wideband Op Amp | Texas Instruments

OPA642P - 400MHz Wideband Op Amp | Texas Instruments

OPA642P ✓ Actif

Comparaison des spécifications

Paramètre OPA642PB OPA642P
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Wideband, low-distortion, low-gain operational amplifier Wideband, low-distortion, low-gain operational amplifier
Amplifier Architecture Single voltage-feedback operational amplifier —
Supply Voltage Range ±4.5 V to ±5.5 V —
Single Supply Equivalent Range 9 V to 11 V —
Stated Gain Figure 90 dB —
Operating Current 25 uA —
Courant de repos 70 uA —
Number of Circuits 1 circuit 1 circuit
Nombre de broches 8 pins —
Boîtier 8-pin PDIP, 0.300 inch (7.62 mm) pitch 8-pin PDIP
Terminal Type Through-hole —
Package Shape Rectangular —
Temperature Grade Industrial —
Output Current [DATA_NEEDED: output current] —
Gain Bandwidth Product [DATA_NEEDED: gain bandwidth product] —
Slew Rate [DATA_NEEDED: slew rate] [DATA_NEEDED: slew rate]
Input Offset Voltage [DATA_NEEDED: input offset voltage] —
Input Bias Current [DATA_NEEDED: input bias current] —
Input Common-Mode Range [DATA_NEEDED: input common-mode voltage range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Noise Voltage Density [DATA_NEEDED: input noise voltage density] —
Total Harmonic Distortion [DATA_NEEDED: total harmonic distortion] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Amplifier Topology — Single voltage-feedback amplifier
Gain-Bandwidth Product — 400 MHz
Tension d'alimentation — ±5.5 V
Open-Loop Gain — 95 dB
Common-Mode Rejection Ratio — 90 dB
Input Noise Density — 2.7 nV/√Hz
Low-Distortion Frequency — 5 MHz
Settling Performance — 12-bit settling to 0.01%
Courant de sortie maximal — ±60 mA
Nombre de broches — 8 pins
Type de montage — Through-hole
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis