STM32H745IIT6 vs STM32H753IIT6 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ STM32H745IIT6 بواسطة STMicroelectronics و STM32H753IIT6 بواسطة STMicroelectronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | STM32H745IIT6 | STM32H753IIT6 |
|---|---|---|
| العلامة التجارية | STMicroelectronics | STMicroelectronics |
| الفئة | Microcontrollers | Microcontrollers |
| حالة دورة الحياة | نشط | نشط |
| Core Architecture | Dual-core Arm Cortex-M7 + Cortex-M4 with FPU | — |
| M7 Maximum Clock Frequency | 480 MHz | — |
| M4 Maximum Clock Frequency | 240 MHz | — |
| Flash Memory | 2 MB (dual-bank, with secure sector) | — |
| SRAM (Total) | 1 MB (192 KB DTCM/AXI + 64 KB DTCM for M4 + 462 KB system SRAM + 4 KB backup) | — |
| Operating Voltage Range | 1.62 V to 3.6 V | — |
| العلبة | 176-pin LQFP (24x24 mm) | 176-pin LQFP (24x24 mm) |
| نوع التركيب | Surface Mount | Surface Mount |
| نطاق درجة حرارة التشغيل | -40 °C to +85 °C (industrial grade) | — |
| ADC | 16-bit ADC (3.6 MSPS) + two 12-bit ADCs | 3 x 12-bit, 3.6 MSPS each |
| DAC | Two 12-bit DACs | 2 x 12-bit |
| Graphics Accelerator | Chrom-ART (DMA2D) | — |
| Communication Interfaces | USB OTG FS+HS, 2 × CAN FD, Ethernet MAC, SDMMC, 2 × OctoSPI, FMC, USART/UART/SPI/I2C/LPUART | USB OTG FS+HS, 2x CAN FD, 2x SDMMC, UART, SPI, I2C, ETH, FMC |
| Timers | Advanced-control, general-purpose, basic, low-power timers (see datasheet for full list) | — |
| مستوى MSL | 3 (per JEDEC J-STD-020) | 3 (168 hours) |
| حالة RoHS | Compliant | Compliant |
| Supply Source | Internal SMPS + LDO regulators | — |
| Core | — | ARM Cortex-M7 with DP-FPU and DSP |
| Maximum CPU Frequency | — | 480 MHz |
| DMIPS | — | 1027 DMIPS |
| CoreMark Score | — | 2424 CoreMark |
| Program Memory (Flash) | — | 2 MB |
| SRAM | — | 1 MB (256 KB DTCM + 256 KB AXI SRAM + 64 KB ITCM + backup SRAM) |
| L1 Cache | — | 16 KB I-cache + 16 KB D-cache |
| Operating Voltage | — | 1.62 V to 3.6 V (3.3 V typical I/O) |
| درجة حرارة التشغيل | — | -40 C to +85 C (industrial grade) |
| Hardware Accelerators | — | JPEG codec, AES-256, SHA-256, TRNG, Chrom-ART (DMA2D) |
| Display Interface | — | TFT-LCD + MIPI-DSI |
| Camera Interface | — | DCMI 8- to 14-bit parallel |