STM32H745IIT6 vs STM32H753IIT6 Perbandingan
Perbandingan bersamaan detil STM32H745IIT6 dari STMicroelectronics dan STM32H753IIT6 dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
STM32H753IIT6 - Cortex-M7 MCU 480MHz 2MB Flash 176-LQFP | ST
STM32H753IIT6 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | STM32H745IIT6 | STM32H753IIT6 |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Core Architecture | Dual-core Arm Cortex-M7 + Cortex-M4 with FPU | — |
| M7 Maximum Clock Frequency | 480 MHz | — |
| M4 Maximum Clock Frequency | 240 MHz | — |
| Flash Memory | 2 MB (dual-bank, with secure sector) | — |
| SRAM (Total) | 1 MB (192 KB DTCM/AXI + 64 KB DTCM for M4 + 462 KB system SRAM + 4 KB backup) | — |
| Operating Voltage Range | 1.62 V to 3.6 V | — |
| Paket | 176-pin LQFP (24x24 mm) | 176-pin LQFP (24x24 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40 °C to +85 °C (industrial grade) | — |
| ADC | 16-bit ADC (3.6 MSPS) + two 12-bit ADCs | 3 x 12-bit, 3.6 MSPS each |
| DAC | Two 12-bit DACs | 2 x 12-bit |
| Graphics Accelerator | Chrom-ART (DMA2D) | — |
| Communication Interfaces | USB OTG FS+HS, 2 × CAN FD, Ethernet MAC, SDMMC, 2 × OctoSPI, FMC, USART/UART/SPI/I2C/LPUART | USB OTG FS+HS, 2x CAN FD, 2x SDMMC, UART, SPI, I2C, ETH, FMC |
| Timers | Advanced-control, general-purpose, basic, low-power timers (see datasheet for full list) | — |
| Level MSL | 3 (per JEDEC J-STD-020) | 3 (168 hours) |
| Status RoHS | Compliant | Compliant |
| Supply Source | Internal SMPS + LDO regulators | — |
| Core | — | ARM Cortex-M7 with DP-FPU and DSP |
| Maximum CPU Frequency | — | 480 MHz |
| DMIPS | — | 1027 DMIPS |
| CoreMark Score | — | 2424 CoreMark |
| Program Memory (Flash) | — | 2 MB |
| SRAM | — | 1 MB (256 KB DTCM + 256 KB AXI SRAM + 64 KB ITCM + backup SRAM) |
| L1 Cache | — | 16 KB I-cache + 16 KB D-cache |
| Operating Voltage | — | 1.62 V to 3.6 V (3.3 V typical I/O) |
| Suhu Kerja | — | -40 C to +85 C (industrial grade) |
| Hardware Accelerators | — | JPEG codec, AES-256, SHA-256, TRNG, Chrom-ART (DMA2D) |
| Display Interface | — | TFT-LCD + MIPI-DSI |
| Camera Interface | — | DCMI 8- to 14-bit parallel |