THVD1450 vs THVD1450DRBR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ THVD1450 بواسطة Texas Instruments و THVD1450DRBR بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
THVD1450 - 50 Mbps RS-485 Transceiver, ±18 kV ESD | Texas Instruments
THVD1450 ✓ نشطTexas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ نشطمقارنة المواصفات
| المعامل | THVD1450 | THVD1450DRBR |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Manufacturer | Texas Instruments | — |
| Product Type | RS-485/RS-422 Transceiver | RS-485/RS-422 Transceiver (half-duplex) |
| Data Rate (Maximum) | 50 Mbps | — |
| Supply Voltage Range | 3 V to 5.5 V | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Half | — |
| ESD Protection (Bus Pins, IEC Air) | ±18 kV (HBM, IEC 61000-4-2) | — |
| ESD Protection (Contact, IEC) | ±8 kV | — |
| Common-Mode Voltage Range | -7 V to +12 V | — |
| Differential Output Swing (Typical) | 1.5 V into 54 Ω | — |
| Fail-Safe Biasing | Open, short, idle | — |
| Number of Nodes (Unit Loads) | 256 (1/8 UL) | — |
| نطاق درجة حرارة التشغيل | -40 °C to +125 °C | — |
| العلبة | 8-SOIC (D) | 8-VSON EP (DRB) 3x3 mm |
| حالة RoHS | Compliant | Compliant |
| Logic Family Compatibility | 3.3 V and 5 V MCU / UART | — |
| Hot-Plug Support | Yes (glitch-free power-up) | — |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Maximum Data Rate | — | 50 Mbps |
| ESD Protection (Bus Pins) | — | ±18 kV IEC 61000-4-2 contact/air |
| EFT Immunity | — | ±4 kV IEC 61000-4-4 |
| Common-Mode Range | — | -7 V to +12 V |
| Receiver Hysteresis | — | 30 mV |
| Receiver Fail-Safe | — | Internal biasing (idle/short/open = logic high) |
| Unit Load | — | 1 UL (32 nodes on bus) |
| درجة حرارة التشغيل | — | -40°C to +125°C |
| نوع التركيب | — | Surface Mount, wettable flank |
| Moisture Sensitivity Level | — | MSL 1 |
| Duplex Mode | — | Half |