TLE8082ESXUMA1 vs TLE82092SAAUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ TLE8082ESXUMA1 بواسطة Infineon و TLE82092SAAUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | TLE8082ESXUMA1 | TLE82092SAAUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Motor Drivers |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Engine Management PMIC | — |
| البنية الطوبولوجية | Integrated 5V supply + 4 low-side drivers + SPI | H-bridge, two N-channel half-bridges |
| نطاق جهد الدخل | 6 V to 40 V | — |
| Integrated Supply Output | 5 V | — |
| Number of Low-Side Drivers | 4 | — |
| Communication Interface | SPI | — |
| العلبة | PG-TSDSO-24 (24-pin TSSOP with exposed pad) | PG-DSO-20-65 (20-pin exposed-pad SOIC) |
| Supplier Device Package | PG-TSDSO-24 | — |
| نوع التركيب | Surface Mount | Surface Mount |
| Operating Temperature Range (Min) | -40 C | — |
| Operating Temperature Range (Max) | [DATA_NEEDED: maximum operating temperature] | — |
| مستوى MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| حالة RoHS | Compliant | Compliant |
| Qualification | AEC-Q100 automotive (per Infineon product page) | — |
| Lead-Free | Yes | — |
| Motor Type | — | DC motor / solenoid (H-bridge) |
| Supply Voltage Vbb | — | 5 V to 28 V (40 V transient tolerant) |
| Continuous Load Current | — | 5.5 A |
| Rds(on) per MOSFET (typ) | — | [DATA_NEEDED: Rds(on) per switch] |
| Selectable Current Limit Ranges | — | 4 programmable thresholds |
| Selectable Slew Rate Settings | — | 2 programmable settings |
| Control Interface | — | SPI (up to 5 MHz, daisy-chain capable) |
| Diagnostic Features | — | Open-load, short-to-GND, short-to-Vbb, over-temperature, under-voltage |
| درجة حرارة التشغيل | — | -40 C to +150 C (junction) |
| Package Dimensions | — | 3.25 mm x 11 mm x 15.9 mm (per Hotenda listing) |
| Process Technology | — | Infineon SMART7 automotive |
| Functional Safety Target | — | ISO 26262 ASIL-B / ASIL-C capable (per datasheet family) |