TLE8082ESXUMA1 vs TLE82092SAAUMA1 Perbandingan
Perbandingan bersamaan detil TLE8082ESXUMA1 dari Infineon dan TLE82092SAAUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
TLE8082ESXUMA1 - Engine Management PMIC 5V SPI PG-TSDSO-24 | Infineon
TLE8082ESXUMA1 ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | TLE8082ESXUMA1 | TLE82092SAAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Motor Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Engine Management PMIC | — |
| Topologi | Integrated 5V supply + 4 low-side drivers + SPI | H-bridge, two N-channel half-bridges |
| Rentang Tegangan Masukan | 6 V to 40 V | — |
| Integrated Supply Output | 5 V | — |
| Number of Low-Side Drivers | 4 | — |
| Communication Interface | SPI | — |
| Paket | PG-TSDSO-24 (24-pin TSSOP with exposed pad) | PG-DSO-20-65 (20-pin exposed-pad SOIC) |
| Supplier Device Package | PG-TSDSO-24 | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Operating Temperature Range (Min) | -40 C | — |
| Operating Temperature Range (Max) | [DATA_NEEDED: maximum operating temperature] | — |
| Level MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Status RoHS | Compliant | Compliant |
| Qualification | AEC-Q100 automotive (per Infineon product page) | — |
| Lead-Free | Yes | — |
| Motor Type | — | DC motor / solenoid (H-bridge) |
| Supply Voltage Vbb | — | 5 V to 28 V (40 V transient tolerant) |
| Continuous Load Current | — | 5.5 A |
| Rds(on) per MOSFET (typ) | — | [DATA_NEEDED: Rds(on) per switch] |
| Selectable Current Limit Ranges | — | 4 programmable thresholds |
| Selectable Slew Rate Settings | — | 2 programmable settings |
| Control Interface | — | SPI (up to 5 MHz, daisy-chain capable) |
| Diagnostic Features | — | Open-load, short-to-GND, short-to-Vbb, over-temperature, under-voltage |
| Suhu Kerja | — | -40 C to +150 C (junction) |
| Package Dimensions | — | 3.25 mm x 11 mm x 15.9 mm (per Hotenda listing) |
| Process Technology | — | Infineon SMART7 automotive |
| Functional Safety Target | — | ISO 26262 ASIL-B / ASIL-C capable (per datasheet family) |