TLE8250GVIOXUMA1 vs TLE6250GV33XUMA1 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ TLE8250GVIOXUMA1 بواسطة Infineon و TLE6250GV33XUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

Infineon
TLE8250GVIOXUMA1 TLE8250GVIOXUMA1 - 1 Mbaud CAN Transceiver | Infineon

TLE8250GVIOXUMA1 - 1 Mbaud CAN Transceiver | Infineon

TLE8250GVIOXUMA1 ✓ نشط
Infineon
TLE6250GV33XUMA1 TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 ✗ انتهى عمره الإنتاجي

مقارنة المواصفات

المعامل TLE8250GVIOXUMA1 TLE6250GV33XUMA1
العلامة التجارية Infineon Infineon
الفئة Interface ICs Interface ICs
حالة دورة الحياة نشط نهاية العمر الإنتاجي
Product Type CAN bus transceiver CAN bus transceiver
Transceiver Configuration 1 transmitter / 1 receiver —
Duplex Mode Half-duplex —
Supply Voltage Range 4.5 V to 5.5 V 12 V to 24 V
Maximum Data Rate 1 Mbaud —
Receiver Hysteresis 200 mV —
CAN Standard ISO 11898-2 —
العلبة PG-DSO-8-16 PG-DSO-8
Terminal Count 8 —
نوع التركيب Surface mount Surface mount
Package Height 1.75 mm maximum —
Lead Form Gull wing —
Package Shape Rectangular —
حالة RoHS Compliant RoHS compliant green product
Predecessor Compatibility Pin and function compatible with TLE6250GV33 —
Electromagnetic Emissions Low EME —
Electromagnetic Immunity High EMI robustness —
نطاق درجة حرارة التشغيل [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Transmitter Propagation Delay [DATA_NEEDED: transmitter propagation delay] [DATA_NEEDED: transmitter propagation delay]
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] [DATA_NEEDED: receiver propagation delay]
Bus Fault Protection [DATA_NEEDED: bus fault protection rating] [DATA_NEEDED: bus fault protection limits]
CAN Transceiver Type — 1/1 half-duplex transceiver
Maximum CAN Data Rate — 1 Mbit/s
Logic I/O Voltage Range — 3.3 V to 5 V
Typical Operating Current — 70 mA
Supply Compatibility — 12 V and 24 V automotive battery systems
Operating Modes — Normal mode and standby mode
Standby Function — Disables both receiver and transmitter
Control Interface — INH control pin
Receive-Only Configuration — RM pin left open when the receive-only feature is not used
Normal-Mode Configuration — INH pin connected to ground when standby mode is not used
CAN Compatibility — ISO 11898
EMC Capability — Automotive CAN transceiver with EMC performance
Package Pin Count — 8 pins
Packaging — Tape and reel
Automotive Qualification — AEC-Q100
Lead-Free Finish — Pb-free finish on leads
Soldering Standard — IPC/JEDEC J-STD-020
REACH Status — unknown
ESD Protection — [DATA_NEEDED: ESD protection ratings]

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر