TS902ID vs TS921ID مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ TS902ID بواسطة STMicroelectronics و TS921ID بواسطة STMicroelectronics. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
STMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID Obsolete
مقارنة المواصفات
| المعامل | TS902ID | TS921ID |
|---|---|---|
| العلامة التجارية | STMicroelectronics | STMicroelectronics |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | Obsolete | نشط |
| Amplifier Type | Dual operational amplifier | Single operational amplifier |
| Channel Count | 2 channels | — |
| Rail-to-Rail | Input and output | — |
| Gain-Bandwidth Product | 1.4 MHz | 4 MHz |
| Input Offset Voltage | 10 mV | — |
| Supply Voltage Range | Single or dual operation from 2.5 V to 16 V | — |
| Standby Current | 0.5 uA | — |
| Standby Output State | Reduced current consumption and high-impedance outputs | — |
| نطاق درجة حرارة التشغيل | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| العلبة | SOIC-14 (SO14), surface mount | 8-pin SOIC |
| Package Pin Count | 14 pins | — |
| Architecture | CMOS | — |
| Application Category | General-purpose instrumentation and signal conditioning | — |
| Output Impedance in Standby | High impedance | — |
| Operating Mode | Single-supply or dual-supply operation | — |
| نوع التركيب | Surface mount | Surface mount |
| Manufacturer Product Description | Rail-to-rail CMOS dual operational amplifier with standby position | — |
| حالة دورة الحياة | Obsolete product according to manufacturer catalog | — |
| Process Technology | — | BiCMOS |
| Operating Supply Range | — | 2.7 V to 12 V |
| Optimized Supply Voltage | — | 3 V and 5 V |
| Slew Rate | — | 1.3 V/us |
| Input Noise Density | — | 9 nV/sqrt(Hz) |
| أقصى تيار خرج | — | 80 mA |
| Input Common-Mode Range | — | Rail-to-rail |
| Output Swing | — | Rail-to-rail |
| Number of Amplifiers | — | 1 |
| عدد الدبابيس | — | 8 |
| Output Current Capability | — | 80 mA; able to drive 32 loads |
| Internal Protection | — | ESD internal protection |
| حالة RoHS | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |