TS902ID vs TS921ID Comparación
Comparación detallada lado a lado de TS902ID por STMicroelectronics y TS921ID por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID Obsolete
Comparación de especificaciones
| Parámetro | TS902ID | TS921ID |
|---|---|---|
| Marca | STMicroelectronics | STMicroelectronics |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Obsolete | Activo |
| Amplifier Type | Dual operational amplifier | Single operational amplifier |
| Channel Count | 2 channels | — |
| Rail-to-Rail | Input and output | — |
| Gain-Bandwidth Product | 1.4 MHz | 4 MHz |
| Input Offset Voltage | 10 mV | — |
| Supply Voltage Range | Single or dual operation from 2.5 V to 16 V | — |
| Standby Current | 0.5 uA | — |
| Standby Output State | Reduced current consumption and high-impedance outputs | — |
| Rango de temperatura de funcionamiento | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | SOIC-14 (SO14), surface mount | 8-pin SOIC |
| Package Pin Count | 14 pins | — |
| Architecture | CMOS | — |
| Application Category | General-purpose instrumentation and signal conditioning | — |
| Output Impedance in Standby | High impedance | — |
| Operating Mode | Single-supply or dual-supply operation | — |
| Tipo de montaje | Surface mount | Surface mount |
| Manufacturer Product Description | Rail-to-rail CMOS dual operational amplifier with standby position | — |
| Estado del ciclo de vida | Obsolete product according to manufacturer catalog | — |
| Process Technology | — | BiCMOS |
| Operating Supply Range | — | 2.7 V to 12 V |
| Optimized Supply Voltage | — | 3 V and 5 V |
| Slew Rate | — | 1.3 V/us |
| Input Noise Density | — | 9 nV/sqrt(Hz) |
| Corriente de salida máxima | — | 80 mA |
| Input Common-Mode Range | — | Rail-to-rail |
| Output Swing | — | Rail-to-rail |
| Number of Amplifiers | — | 1 |
| Número de pines | — | 8 |
| Output Current Capability | — | 80 mA; able to drive 32 loads |
| Internal Protection | — | ESD internal protection |
| Estado RoHS | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |