5M80ZM68I5N - 64 Macrocell MAX V CPLD, 68-BGA, Industrial | Intel
MPN: 5M80ZM68I5N ✓ نشط5M80ZM68I5N نظرة عامة
A Complex Programmable Logic Device (CPLD) is a non-volatile, instant-on programmable logic IC that integrates multiple macrocell-based logic blocks (LABs) with a programmable interconnect matrix. CPLDs sit alongside FPGAs in the broader programmable logic hierarchy (programmable logic device -> CPLD -> programmable logic -> digital IC) and are typically chosen over FPGAs for glue-logic, bus-interface bridging, power-sequencing, and high-drive I/O expansion tasks where deterministic timing and zero-configuration-boot behavior matter more than raw logic density.
Key features of the 5M80ZM68I5N include 64 macrocells across 4 logic array blocks, 160 user-flash-memory bits for user-defined storage, an internal oscillator, JTAG (IEEE 1149.1) and in-system programmability via the Altera/Intel Quartus Prime design tool, and a user-mode flash block for customer IP or revision identification. The device integrates a voltage regulator that derives the 1.8 V core from a user-supplied VCCIO or VCCINT rail, simplifying board power design.
Architecturally, the MAX V CPLD uses a classic AND-OR PLA fabric with each macrocell containing a programmable AND array, a flip-flop, product-term steering, and a selectable I/O standard. The 68-BGA package exposes up to 52 user I/O pins (52-MBGA variants differ in I/O count) and offers very small board footprint compared to equivalent TQFP-100 CPLDs.
Typical applications include I/O expansion and level shifting between 1.8 V MCUs and 3.3 V peripherals, bus-interface bridging (for example I2C, SPI, UART, or parallel memory glue), power-sequence and reset-distribution controllers in industrial control boards, and consumer/automotive infotainment subsystems where instant-on non-volatile logic is required at low cost.
When designing with this device, allocate a 0.1 uF + 1 uF decoupling network on every VCCIO bank and place the JTAG TMS/TCK/TDO/TDI chain within 75 mm of the BGA balls to keep programming reliable. Use Quartus Prime 15.1 or later with the MAX V device support installed to generate JIC/POF programming files.
بدائل مباشرة لـ 5M80ZM68I5N — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع 5M80ZM68I5N (نفس عامل الشكل والبصمة) — يختلف في Package, Operating Temperature, Configuration Memory, Logic Elements, Programming Interface.
5M80ZM68C5N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←5M80ZM68C4N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←5M80ZM68A5N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←5M160ZM68I5N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←5M240ZM68I5N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←5M80ZM68I5N الحدود القصوى والخصائص الكهربائية
| Family | MAX V |
| Macro Cells | 64 |
| Logic Array Blocks (LABs) | 4 |
| Maximum Operating Frequency | 118.3 MHz |
| Pin-to-Pin Logic Delay (tPD) | 7.5 ns |
| User I/O Pins | 52 |
| User Flash Memory | 160 bits |
| Core Voltage (VCCINT) | 1.8 V (1.71 V to 1.89 V) |
| I/O Voltage (VCCIO) | 1.2 V / 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| العلبة | 68-ball MBGA (5M80ZM68) |
| نوع التركيب | Surface Mount |
| درجة حرارة التشغيل | -40C to +100C (Industrial) |
| Programming Interface | JTAG (IEEE 1149.1) + ISP |
| Operating Mode | Non-volatile, instant-on |
| حالة RoHS | Compliant |
| Lead-Free / Halogen-Free | Yes / Unknown |
دليل تكوين أطراف 5M80ZM68I5N 68-ball mbga (5m80zm68)
تكوين الأطراف لـ 5M80ZM68I5N (حزمة 68-ball mbga (5m80zm68)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ 5M80ZM68I5N.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
5M80ZM68I5N مناسب لـ 6 التطبيقs: I/O Expansion and Level Shifting, Bus Interface Bridging (I2C / SPI / UART / Parallel), Power Sequencing and Reset Distribution, Industrial Control and Factory Automation, Consumer / Automotive Infotainment Subsystems, Communications and Telecom Peripherals.
I/O Expansion and Level Shifting
The 5M80ZM68I5N's four independent VCCIO banks (1.2 V to 3.3 V) make it ideal for I/O expansion between a 1.8 V MCU and 3.3 V peripheral devices. Place the CPLD between the MCU bus and the peripherals; each I/O pin drives at the bank voltage, eliminating external level-shifters. The 52 user I/Os and 64 macrocells fit 30-50 glue-logic equations, while the 7.5 ns tPD guarantees deterministic glue-logic timing for SPI, I2C, UART, and parallel memory bridges.
موصى به
Bus Interface Bridging (I2C / SPI / UART / Parallel)
MAX V CPLDs are widely deployed as protocol bridges between mismatched bus widths, voltages, or clock domains. The 5M80ZM68I5N can translate an 8-bit parallel bus to SPI, isolate two I2C buses with different addresses, or convert a 3.3 V UART to 1.8 V logic in a single chip. Its non-volatile instant-on configuration (under 1 ms from power-up) is critical for systems that boot in a defined state without firmware load. The 7.5 ns propagation delay supports bridges up to ~80 MHz.
موصى به
Power Sequencing and Reset Distribution
The 5M80ZM68I5N is well-suited for power-rail sequencing in multi-supply systems. Program the CPLD to assert DC-DC EN pins in a defined order with software-tunable delays using the internal oscillator and counter macrocells. With 1.8 V core operation, it can be powered by the same rail that it sequences, simplifying the start-up dependency chain. Its industrial -40C to +100C grade makes it ideal for factory-automation controllers and outdoor telecom equipment.
موصى به
Industrial Control and Factory Automation
PLC-style controllers, motor-driver front-ends, and sensor aggregators benefit from the 5M80ZM68I5N's industrial temperature rating and instant-on non-volatile behavior. The CPLD can debounce mechanical switch inputs, generate deterministic PWM for stepper motor control up to ~100 kHz, and aggregate SSI-encoder data into a parallel bus. Its 1.8 V core plus wide VCCIO tolerates the noisy factory-floor environment when paired with proper decoupling (0.1 uF + 1 uF per bank).
موصى به
Consumer / Automotive Infotainment Subsystems
Dashboard peripherals, HVAC controllers, and audio DSP front-ends often need a non-volatile, deterministic state machine to manage button-matrix scanning, LED driving, and I2S/SAI stream routing. The 5M80ZM68I5N provides instant-on logic without external boot Flash, runs from 1.8 V, and the 68-ball MBGA fits into compact 5x5 mm PCB layouts. Designers select this part when their state-machine and glue-logic fits within 64 macrocells and they need industrial temperature grade for cabin-mount reliability.
موصى به
Communications and Telecom Peripherals
CPE routers, fiber-optic line cards, and base-station peripherals use the 5M80ZM68I5N for clock-domain crossing, front-panel LED and button scanning, and low-speed serial multiplexing. The 52 user I/Os comfortably drive up to 6 front-panel LEDs via current-limit resistors and serve as glue logic between a PHY, an FPGA, and a host CPU. The industrial temperature grade, IEEE 1149.1 JTAG chain, and Quartus Prime design flow make this part a telecom-bench standard.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ 5M80ZM68I5N — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | 5M80ZM68C5N | 5M80ZM68C4N | 5M80ZM68A5N | 5M160ZM68I5N | 5M240ZM68I5N |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Package | 68-ball MBGA | 68-ball MBGA (same) | 68-ball MBGA (same) | 68-ball MBGA (same) | 68-ball MBGA (same) | 68-ball MBGA (same) |
| Macro Cells | 64 | 64 | 64 | 64 | 160 | 240 |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) |
| Core Voltage (VCCINT) | 1.8 V (1.71 V to 1.89 V) | 1.8 V (1.71 V to 1.89 V) | 1.8 V (1.71 V to 1.89 V) | 1.8 V (1.71 V to 1.89 V) | 1.8 V (1.71 V to 1.89 V) | 1.8 V (1.71 V to 1.89 V) |
| Pin-to-Pin Delay (tPD) | 7.5 ns | 7.5 ns (similar) | Slower (C4 grade) | Comparable A-speed | 7.5 ns | 7.5 ns |
| User I/O Pins | 52 | 52 | 52 | 52 | 52 | 52 |
| Pin-to-Pin Compatible | Yes (reference) | Yes (drop-in) | Yes (drop-in) | Yes (drop-in) | Yes (drop-in upgrade) | Yes (drop-in upgrade) |
| Programming Interface | JTAG (IEEE 1149.1) + ISP | JTAG + ISP | JTAG + ISP | JTAG + ISP | JTAG + ISP | JTAG + ISP |
أبرز الفروقات
- Non-volatile instant-on logic with zero boot delay (مقابل5M160ZM68I5N)
- Same-BGA, four VCCIO banks for multi-voltage glue logic (مقابل5M80ZM68C5N)
- Pin-compatible density upgrade path on the same PCB (مقابل5M240ZM68I5N)
ملاحظات التصميم
Decouple every VCCIO bank with a 0.1 uF X7R ceramic plus a 1 uF X5R bulk capacitor placed within 3 mm of the BGA balls. For the VCCINT rail add a separate 0.1 uF + 10 uF pair. The MAX V integrates an internal linear regulator that derives the 1.8 V core from VCCIO, so a clean 3.3 V VCCIO rail is required even if the user logic targets 1.8 V I/O - power-rail noise above 50 mVpp can cause JTAG programming failures.
The 68-ball MBGA uses a fine-pitch staggered ball array. Use a 4-layer PCB with a continuous GND plane directly under the package and route all signal escapes on the top layer with 4 mil trace/space. Fan-out via an inner layer with 8 mil microvias. Keep all JTAG chain traces (TMS, TCK, TDO, TDI) within 75 mm total length and add 4.7 kohm pull-ups on TMS and TDI to keep the state machine in known-good state at power-up.
Place the JTAG header (or test pads) on the same board edge as the CPLD to keep the programming cable stub under 50 mm. When using the device as a level-shifter, group the 1.8 V and 3.3 V I/O on adjacent banks and route the bank VCCIO pins with a wide 20 mil trace to bypass the internal IR drop. Avoid placing switching DC-DC converters within 10 mm of the BGA to prevent radiated EMI coupling into the analog reference inputs.
Do NOT confuse 5M80ZM68I5N with 5M80ZM64I5N - the ZM68 is 68 balls / 52 user I/Os, while the ZM64 is 64 balls / different pinout, so swapping requires a PCB redesign. Also, do NOT migrate Quartus Prime JIC files between temperature grades without recompiling, because the IO standard timing models differ across I/C/A speed grades. Finally, the device's 160-bit user flash is erasable but NOT security-locked by default - configure the security bit in the Quartus programmer before mass production.
معلومات الامتثال
RoHS compliance confirmed via distributor listings and Altera/Intel MAX V device handbook. The I5N industrial temperature grade is suitable for cabin-mounted automotive electronics but is NOT AEC-Q100 qualified - for under-hood AEC-Q100 designs, evaluate MAX V automotive variants or migrate to the MAX 10 family.
