A3P060-FG144I - 60K Gate ProASIC3 FPGA | Microchip Technology
MPN: A3P060-FG144I ✓ نشطA3P060-FG144I نظرة عامة
A field-programmable gate array is a programmable digital integrated circuit containing configurable logic blocks, programmable interconnect, and input/output resources. An FPGA sits above fixed-function logic and programmable processors in the digital-device hierarchy, allowing parallel hardware logic to be implemented and reprogrammed without changing the PCB. The ProASIC3 family combines flash-based configuration with a large gate count and a low-power 1.5 V core.
The A3P060-FG144I provides 1,536 configurable logic blocks according to the product-page data, approximately 60,000 equivalent gates, 96 I/O terminals, and 18 Kb of block RAM. Published frequency references range from 231 MHz to 350 MHz depending on the specific speed grade and characterization context. Its single-chip architecture reduces external memory requirements and supports in-system reprogramming for field updates.
The ProASIC3 architecture is organized around programmable logic blocks and a flexible interconnect network. Its low-impedance flash switches allow configuration data to be stored on-chip, while dedicated I/O resources support multiple interface standards. The 1.5 V core is useful in systems where the FPGA operates from a single low-voltage rail and must share power sequencing with adjacent circuitry.
Typical applications include industrial controllers, data acquisition equipment, communications interfaces, automotive electronics, embedded security systems, and general-purpose glue-logic platforms. The 144-ball package provides a high pin count in a compact land pattern, while the 96 available user I/Os support parallel buses, control signals, serial interfaces, and mixed-signal connectivity.
For new PCB layouts, confirm the exact ball map, exposed-pad requirements, and power pins in the manufacturer datasheet before routing. Verify the selected speed and temperature suffix against the system clock target and ambient conditions. Because ProASIC3 is an older programmable-logic family, software-tool availability and long-term availability should be confirmed during sourcing.
This page consolidates package, logic-resource, temperature-grade, and interface information with same-footprint replacement options and engineering-oriented comparison guidance. It is intended to help designers evaluate the A3P060-FG144I against other ProASIC3 configurations before committing to a PCB, toolchain, or production schedule.
بدائل مباشرة لـ A3P060-FG144I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع A3P060-FG144I (نفس عامل الشكل والبصمة) — يختلف في Device Type, Package, Configuration Memory, Process Technology, User I/O Count.
A3P060-FGG144I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
A3P060-1FG144I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
A3P060-FG144T
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←A3P060-FGG144II
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
A3P060-1FGG144II
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
A3P060-FG144I الحدود القصوى والخصائص الكهربائية
| Device Type | ProASIC3 Flash Field-Programmable Gate Array |
| Equivalent Gates | 60,000 gates |
| Configurable Logic Blocks | 1,536 CLBs |
| Logic Elements | 700 LEs |
| User I/O Count | 96 I/Os |
| Block RAM | 18 Kb |
| Core Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| Maximum Frequency Reference | 231 MHz to 350 MHz depending on speed grade |
| العلبة | 144-LBGA, 13 mm x 13 mm |
| Terminal Pitch | 1.000 mm |
| Temperature Grade | Industrial |
| Configuration Memory | Flash |
| نوع التركيب | Surface Mount |
| Package Form | Square low-profile ball grid array |
دليل تكوين أطراف A3P060-FG144I square low-profile ball grid array
تكوين الأطراف لـ A3P060-FG144I (حزمة square low-profile ball grid array). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ A3P060-FG144I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
A3P060-FG144I مناسب لـ 6 التطبيقs: Industrial Data-Acquisition Controller, Automotive Communications Interface, Embedded Communications Gateway, Security and Authentication Controller, Programmable Timing and Control Platform, Compact Instrumentation and Test Equipment.
Industrial Data-Acquisition Controller
The A3P060-FG144I fits parallel data-acquisition and control systems that need deterministic sampling, channel multiplexing, and protocol conversion. Its 1,536 configurable logic blocks and 96 user I/Os can implement counters, timing units, interface bridges, and control logic without relying on several discrete logic devices. The 18 Kb of block RAM provides local buffering for status and alignment functions. On a 144-ball BGA PCB, keep high-speed acquisition traces short, provide continuous power and ground planes, and place decoupling capacitors adjacent to the relevant supply balls. The industrial-grade ordering option supports designs intended for extended temperature operation.
موصى به
Automotive Communications Interface
The A3P060-FG144I is suitable for parallel-to-serial communications, control-logic consolidation, and protocol translation in automotive electronics. Its 96 user I/Os support address and data buses, control strobes, status lines, and multiple external interfaces, while the 60,000-gate ProASIC3 resource level permits several independent logic blocks to coexist. Flash configuration simplifies deterministic power-up behavior and permits controlled field updates. Automotive use requires confirmation that the exact MPN carries the required AEC-Q100 qualification, temperature range, and PPAP documentation rather than relying only on family-level designation.
موصى به
Embedded Communications Gateway
The A3P060-FG144I can consolidate framing, CRC generation, buffering, and low-speed interface conversion in embedded communications equipment. Sixty thousand equivalent gates and 18 Kb of block RAM allow several packet-processing stages to operate in parallel, reducing reliance on external programmable logic. The 1.5 V core and single-chip flash architecture also reduce board complexity. For routing guidance, keep clock and high-speed I/O nets away from noisy analog or switching-power sections, use the datasheet-recommended I/O termination, and validate signal integrity with an eye-pattern test at the target data rate.
موصى به
Security and Authentication Controller
The A3P060-FG144I is appropriate for cryptographic, authentication, and key-management support functions where parallel hardware logic must complete predictably. Its configurable blocks can implement state machines, checksum engines, comparison logic, and parallel pipelines, while the 18 Kb of block RAM supports small working buffers. On-chip flash configuration preserves the programmed logic across power cycles and supports controlled updates. Because cryptographic requirements vary by product, validate the algorithm implementation, timing, and certification scope independently rather than treating raw FPGA performance as proof of security compliance.
موصى به
Programmable Timing and Control Platform
The A3P060-FG144I works well as a programmable timing, sequencing, and interlock controller for equipment that requires multiple counters, state machines, and precise digital relationships. Its 96 user I/Os provide connections for sensors, actuators, interlocks, and operator controls, while the flash configuration allows operating sequences to be revised without changing the board. Engineering teams should define every pin's I/O standard and timing constraint in the project files, reserve unused balls appropriately, and run static timing analysis across the full specified voltage and temperature range rather than only at a nominal laboratory condition.
موصى به
Compact Instrumentation and Test Equipment
The A3P060-FG144I is suitable for instrumentation front ends that require pattern generation, acquisition sequencing, trigger logic, and display or communications control. The ProASIC3 device combines 1,536 configurable logic blocks with 96 user I/Os in a 13 mm by 13 mm package, allowing substantial functionality without a separate processor for every timing function. Flash configuration enables rapid board bring-up and repeatable manufacturing. Design the BGA layout with a solid ground reference, minimize stubs on clock nets, and isolate sensitive measurement paths from FPGA output switching to preserve measurement accuracy.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ A3P060-FG144I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | A3P060-FGG144I | A3P060-1FG144I | A3P060-FG144T | A3P060-FGG144II | A3P060-1FGG144II |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-LBGA, 13 mm x 13 mm | 144-ball low-profile BGA | 144-ball low-profile BGA | 144-ball low-profile BGA | 144-ball low-profile BGA | 144-ball low-profile BGA |
| Device Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Equivalent Gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates |
| Configurable Logic Blocks | 1,536 CLBs | 1,536 CLBs | 1,536 CLBs | 1,536 CLBs | 1,536 CLBs | 1,536 CLBs |
| User I/O Count | 96 I/Os | 96 I/Os | 96 I/Os | 96 I/Os | 96 I/Os | 96 I/Os |
| Block RAM | 18 Kb | 18 Kb | 18 Kb | 18 Kb | 18 Kb | 18 Kb |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Process Technology | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS |
| Configuration Memory | Flash | Flash | Flash | Flash | Flash | Flash |
أبرز الفروقات
- Combines 60,000 gates and 96 I/Os in a compact 144-ball BGA (مقابلA3P060-FGG144I)
- Industrial ordering option for extended-temperature designs (مقابلA3P060-FGG144II)
- Pin-compatible migration without changing the BGA land pattern (مقابلA3P060-1FG144I)
- Single-chip flash configuration removes external boot memory (مقابلA3P060-FG144T)
ملاحظات التصميم
The 144-ball, 1.000 mm-pitch BGA requires a dense escape-routing strategy. Follow the manufacturer land pattern and place-in-package guidance exactly, including ball-pad geometry and via placement. A four-layer board is often the practical starting point for power, ground, and signal routing, but layer count alone does not guarantee performance: uninterrupted reference planes, short via stubs, and symmetrical escape paths are more important. Avoid routing fast clocks or buses directly beneath the device unless the stackup and reference plane are validated.
Separate the core and I/O supply paths as specified by the family documentation, and distribute both across multiple power and ground balls rather than relying on a single connection. Place the required bulk and high-frequency decoupling capacitors close to their assigned supply balls, with the smallest capacitors nearest the package. Validate the regulator’s startup, transient response, and total current across worst-case logic activity. Do not assume that a nominal rail voltage guarantees clean operation under simultaneous high I/O toggling without measuring the on-board power-supply impedance.
Assign every user I/O a specific voltage standard, drive strength, slew rate, and termination strategy in the project constraints. Apply series damping to problematic edge-rate-sensitive nets rather than slowing every interface indiscriminately. Keep clock routing short and symmetrical, provide a solid ground reference under high-speed nets, and leave spare BGA locations available for optional termination or decoupling changes. Run static timing analysis at the specified voltage and temperature corner, then verify board-level timing with an oscilloscope or logic analyzer.
The most common migration error is treating every A3P060-FG144 suffix as electrically identical. Pin compatibility does not guarantee identical temperature grade, speed grade, automotive qualification, or device-lifecycle status. Review the ProASIC3 ordering-information table, confirm the exact suffix against the clock and environmental requirements, and preserve the validated configuration bitstream. For new production programs, also request confirmation of the supported programmer, software version, and availability of the exact ordering code.
معلومات الامتثال
The exact compliance and qualification records for A3P060-FG144I were not present in the product listings. A separate lead-free notation appears for A3P060-FGG144I, but it was not applied to this exact MPN. Verify all compliance and automotive documents against the manufacturer ordering information before production release.