Analog Devices

AD694JR - 4-20 mA Current Transmitter | Analog Devices

MPN: AD694JR ✓ نشط
10.000 V Vdss 4-20 mA or 0-20 mA Id 16-lead SOIC Package
الحد الأدنى للطلب: 1 |

AD694JR نظرة عامة

The Analog Devices AD694JR is a monolithic current transmitter that accepts a high-level input signal and drives a standard 4-20 mA current loop. It is supplied in a 16-lead SOIC package for industrial process-control equipment, including signal-conditioning systems controlling valves, actuators, and other field devices. The AD694 family supports 4-20 mA and 0-20 mA output ranges, precalibrated input ranges, a precision 10.000 V reference, and single or dual supply operation.

A current transmitter is an interface IC that converts a control or measurement voltage into a standardized current signal. This current-loop interface belongs to the sensor and detector interface hierarchy, linking sensors, programmable sources, and process-control equipment with field instrumentation. Unlike a digital sensor interface, the AD694 produces an analog loop current that can travel through industrial wiring while resisting signal corruption and maintaining compatibility with standard 4-20 mA receivers.

The AD694 includes an input buffer amplifier that can scale the incoming signal or buffer the output of a current-mode DAC. Its precalibrated input ranges reduce external adjustment requirements, while the precision reference provides a stable 10.000 V reference for systems that need accurate signal conditioning. The open-loop alarm feature can report a transmitter fault to downstream monitoring equipment when the loop cannot maintain its commanded state.

The AD694 family supports a wide power-supply range extending to +36 V and provides wide output compliance, allowing the transmitter to operate with common industrial supply conditions and practical loop loads. Operation from either a single or dual supply gives designers flexibility in instrumentation systems where one supply rail or bipolar rails are available. These features make the device useful for both compact transmitter modules and larger industrial control platforms.

Typical uses include process-control current-loop transmitters, actuator and valve controllers, programmable test and measurement systems, and factory automation equipment. A voltage from a sensor conditioner, controller, or current-mode DAC can be applied at the buffered input, while the AD694 converts it into a current suitable for a 4-20 mA loop. The result is a straightforward interface between low-level electronics and field-wired industrial devices.

When designing around the AD694JR, follow the manufacturer datasheet for input-range selection, supply connection, output-loop configuration, and compensation. Keep sensitive input routing away from the current-output path, and verify that the selected output range and supply polarity match the receiving instrument. The 16-lead SOIC package permits conventional surface-mount assembly but requires adequate copper and thermal management for reliable operation at elevated internal dissipation.

بدائل مباشرة لـ AD694JR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع AD694JR (نفس عامل الشكل والبصمة) — يختلف في Output Current Range, Package, Mounting Type, Function, Input Offset Voltage.

Analog Devices
Output Current Range: 0 mA to 20 mA (4 mA to 20 mA with live-zero offset)
Package: 16-SOIC_W (0.295 in / 7.50 mm width), exposed pad
Mounting Type: Surface Mount (SMD/SMT)
قارن مع AD694JR →
Analog Devices
Output Current Range: 0 mA to 20 mA (or 4 mA to 20 mA)
Package: 16-SOIC (Wide Body, 0.300")
Function: 4-20 mA Current Loop Transmitter (V/I Converter)
قارن مع AD694JR →

AD694ARZ

✅ بديل مباشر
Analog Devices
📦 16-lead SOIC
Current Transmitter (4-20 mA / 0-20 mA) · Voltage · Voltage (drives current loop) · 0 mA to 20 mA (4 mA to 20 mA with live-zero offset) · 0 V to 10 V (or 0 V to 2 V) · 3 · 150 µV · 90 dB

تواصل لمعرفة السعر

عرض ورقة البيانات ←

AD694BRZ

✅ بديل مباشر
📦 16-lead SOIC
Retains the 4-20 mA and 0-20 mA output ranges and 16-lead SOIC footprint; output-loop range difference is 0 mA, while the ordering-grade requirements must be checked

📋 بديل مرجعي (غير موجود في الكتالوج)

AD694JR المواصفات

Product Type Monolithic current transmitter
Output Current Range 4-20 mA or 0-20 mA
Input Signal Type High-level voltage input
Precision Reference Voltage 10.000 V
Maximum Supply Voltage +36 V
Supply Configuration Single or dual supply operation
Input Buffer Integrated input buffer amplifier
Alarm Function Open-loop alarm
العلبة 16-lead SOIC
نوع التركيب Surface mount

دليل تكوين أطراف AD694JR 16-lead soic

تكوين الأطراف لـ AD694JR (حزمة 16-lead soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-lead soic لـ AD694JR

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AD694JR.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

AD694JR مناسب لـ 6 التطبيقs: Process-Control Current Transmitters, Valve and Actuator Control, Factory Automation Signal Conditioning, Programmable Test and Measurement Systems, Industrial Data Acquisition, Transmitter Module Electronics.

🏭

Process-Control Current Transmitters

The AD694JR fits process-control transmitter boards that must convert a high-level control voltage into a standard 4-20 mA signal. Its monolithic current-transmitter architecture accepts a buffered input and drives the loop while providing an open-loop alarm for downstream fault detection. The integrated 10.000 V reference supports repeatable signal conditioning, while single- or dual-supply operation lets the circuit adapt to different industrial signal-chain architectures. In a transmitter design, the AD694JR sits between the sensor conditioner or controller and field wiring, with the output range configured to match the receiving controller.

⚙️

Valve and Actuator Control

The AD694JR is suitable for current-loop interfaces that operate proportional valves, actuators, and related field equipment. A control voltage can be applied to the AD694 input buffer and converted into either a 4-20 mA or 0-20 mA command, depending on the selected configuration. The input buffer can also accept a signal from a current-mode DAC, making the transmitter useful in programmable industrial test systems. Because the AD694 family supports supply voltages extending to +36 V and includes an open-loop alarm, the circuit can combine field-side loop drive with basic wiring-fault monitoring.

🏭

Factory Automation Signal Conditioning

The AD694JR can be used in factory automation modules that translate controller-level voltage signals into standardized current for long-distance field wiring. Its buffered input reduces the loading seen from the originating control circuit, while the 4-20 mA or 0-20 mA output supports conventional industrial receivers. The open-loop alarm allows a supervisory system to identify a broken loop or transmitter output failure. The 16-lead SOIC package is appropriate for compact PCB-mounted instrumentation, although the design must follow the manufacturer's grounding, decoupling, and output-compliance guidance.

🖥️

Programmable Test and Measurement Systems

The AD694JR is appropriate for test and measurement equipment that must emulate or interface with industrial 4-20 mA loops. Its input buffer can scale an external source or buffer a current-mode DAC output, allowing the transmitter to convert a programmable command into a representative loop current. The family also offers a 0-20 mA range for compatible receivers and a precision 10.000 V reference for stable measurement conditions. Designers should configure the selected input range and output polarity from the Analog Devices datasheet and verify loop compliance against the intended load resistance.

📡

Industrial Data Acquisition

The AD694JR can bridge an analog measurement or control source to industrial receivers that use current-loop signaling. A sensor conditioner output or controller voltage is applied to the buffered input, and the transmitter generates the required current for the connected instrument. This is useful in data-acquisition equipment where standardized current simplifies cabling, grounding, and interoperability between transmitters and receiving modules. The AD694's precalibrated input ranges and integrated reference support predictable conversion, while the open-loop alarm provides an additional path for reporting loop or output faults.

🔧

Transmitter Module Electronics

The AD694JR is suitable for compact transmitter modules that need a dedicated analog current-loop output stage. Its monolithic implementation combines the input buffer, reference, current transmitter, and alarm capability in a 16-lead SOIC, reducing the number of separate signal-conditioning blocks. Single- and dual-supply options permit integration with different field-side power architectures, and the range extending to +36 V supports industrial supply conditions. The module designer must still follow the manufacturer guidance for decoupling, grounding, thermal performance, and output-loop protection.

ملخص المنتجات الموصى بها

AD694 Core monolithic current-transmitter device يُستخدم في: Process-Control Current Transmitters, Valve and Actuator Control, Programmable Test and Measurement Systems, Transmitter Module Electronics AD694JR Analog Devices يُستخدم في: Process-Control Current Transmitters, Factory Automation Signal Conditioning, Industrial Data Acquisition AD694ARZ Analog Devices يُستخدم في: Valve and Actuator Control, Programmable Test and Measurement Systems, Transmitter Module Electronics AD694BRZ Same-family SOIC ordering variant يُستخدم في: Factory Automation Signal Conditioning, Industrial Data Acquisition
What is the AD694JR?
The AD694JR is a monolithic current transmitter that converts a high-level voltage input into a standard 4-20 mA or 0-20 mA output for industrial process-control systems. According to the Analog Devices AD694 datasheet, the device is intended for driving valves, actuators, and other devices connected to current loops. It is packaged in a 16-lead SOIC and includes an input buffer amplifier, a precision 10.000 V reference, and an open-loop alarm function.
What are the key specifications of AD694JR that engineers should know?
The AD694JR supports 4-20 mA and 0-20 mA loop-current ranges, operates from a single or dual supply, and permits a power-supply range extending to +36 V. The Analog Devices AD694 datasheet also identifies precalibrated input ranges, an integrated input buffer, a 10.000 V precision reference, wide output compliance, and an open-loop alarm. The component is supplied in a 16-lead surface-mount SOIC package.
Where can I download the AD694JR datasheet PDF?
The official AD694 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD694.pdf. The manufacturer document contains the functional description, supported input and output configurations, electrical characteristics, application guidance, and package information for the AD694 family, including the AD694JR ordering option. Use this manufacturer document for pin assignment, supply wiring, and final circuit design.
Where is the AD694JR pinout located?
The AD694JR pin assignment is located in the pin-configuration section of the Analog Devices AD694 datasheet. The device uses a 16-lead SOIC package. Follow the manufacturer's pin-description table when assigning input, supply, output, reference, and alarm connections; do not infer the pin functions from the ordering code alone. The official PDF is available from the Analog Devices product page and the AD694 data-sheet link.
How does the AD694JR support 4-20 mA current-loop control?
The AD694JR accepts a buffered high-level input and converts it into a standard 4-20 mA current output for valves, actuators, and other field devices. According to the Analog Devices AD694 datasheet, the AD694 family also supports a 0-20 mA range and includes an open-loop alarm. The buffered input can also scale a source signal or accept the output of a current-mode DAC.
Can AD694JR operate from a single supply?
Yes. The AD694JR supports both single-supply and dual-supply operation, and the AD694 family has a power-supply range extending to +36 V. According to the Analog Devices AD694 datasheet, the appropriate connection depends on the selected input and output ranges. Use the manufacturer's recommended application diagrams and pin descriptions to configure the supply pins and decoupling for the operating mode.
What is the difference between AD694JR and AD694ARZ?
The AD694JR and AD694ARZ belong to the same Analog Devices AD694 current-transmitter family and use a 16-lead SOIC footprint. Their order codes can denote different qualification or temperature-grade options, so the electrical grade must be checked in the Analog Devices ordering information before substitution. Both retain the 4-20 mA and 0-20 mA transmitter architecture, making the board footprint reusable when device-grade requirements match.
What is the difference between AD694JR and AD694BRZ?
The AD694JR and AD694BRZ are members of the Analog Devices AD694 monolithic current-transmitter family with the same 16-lead SOIC footprint and the same basic 4-20 mA or 0-20 mA output architecture. The order-code distinction concerns the device grade and operating qualification. Compare the AD694 ordering table and electrical characteristics before making a replacement, particularly if the installation requires a specific temperature range.
When should I choose AD694JR over another AD694-family device?
Choose the AD694JR when the design requires the 16-lead SOIC AD694 architecture, a 4-20 mA or 0-20 mA output, an integrated input buffer, and the grade specified by the AD694JR ordering code. Select another family order code instead when the installation needs a different qualification or temperature grade. The Analog Devices datasheet and ordering table should determine the final choice, not package similarity alone.
Is AD694JR suitable for industrial process-control and automation systems?
Yes. The AD694JR is specifically designed for standard industrial current loops used to control valves, actuators, and other process equipment. According to the Analog Devices AD694 datasheet, it accepts high-level inputs, supports single or dual supplies, and provides an open-loop alarm for fault monitoring. Its +36 V maximum supply capability also makes it relevant to industrial instrumentation with higher-voltage field-side circuitry.
What is the best drop-in replacement for AD694JR?
The closest documented same-family drop-in candidates are the AD694ARZ and AD694BRZ because they retain the AD694 transmitter architecture and 16-lead SOIC footprint. No independently documented cross-brand drop-in replacement was identified. Confirm temperature grade, electrical limits, supply configuration, and lifecycle requirements in the Analog Devices ordering information before replacing the AD694JR.
Can AD694ARZ replace AD694JR?
The AD694ARZ can serve as a footprint-compatible candidate for the AD694JR because both are AD694-family devices in a 16-lead SOIC package. The replacement is conditional on matching the required temperature and qualification grade and satisfying the same electrical limits. The Analog Devices AD694 ordering table and datasheet are the controlling documents for this decision.
What can replace AD694JR?
AD694ARZ and AD694BRZ are the documented same-family replacement candidates for the AD694JR because they use the same 16-lead SOIC footprint and preserve the AD694 current-transmitter function. A defensible drop-in replacement must also meet the required input range, output accuracy, supply range, temperature grade, and alarm requirements. No verified cross-brand pin-compatible substitute is established for this device.
Where can I request a quote for AD694JR?
You can request a current AD694JR quotation through the Request a Quote form on this product page. The form is the appropriate route for checking order availability, quantity breaks, and current lead time without relying on a static price. For design qualification, use the official Analog Devices AD694 datasheet and product page; for sourcing, submit the exact AD694JR ordering code and required quantity.
Is AD694JR in stock and what is its lead time?
Current AD694JR inventory and lead time should be confirmed through the Request a Quote form on this page. Because stock and lead time vary with order quantity and market conditions, the manufacturer datasheet is not the appropriate source for a live commitment. Submit the exact 16-lead SOIC order code AD694JR and your required quantity for an up-to-date sourcing response.
Does the AD694JR need an external precision reference?
The AD694 family includes a precision 10.000 V reference, as identified in the Analog Devices AD694 datasheet. The integrated reference supports accurate signal-conditioning behavior without requiring the complete external reference arrangement used in some older transmitter designs. Consult the datasheet's input-range and reference-pin sections to determine how the internal reference is configured in the selected operating mode.

بيانات مرجعية هندسية لـ AD694JR — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the AD694JR for a 16-lead SOIC industrial current-loop transmitter that must provide 4-20 mA or 0-20 mA output, an integrated input buffer, a 10.000 V reference, and an open-loop alarm. The AD694ARZ and AD694BRZ are footprint-compatible same-family candidates when their specific ordering grade matches the installation's temperature and qualification requirements. Because all three devices preserve the same core transmitter architecture, the deciding factors are qualification grade, operating-temperature limits, lifecycle requirements, and availability rather than PCB geometry. Do not substitute an unrelated current transmitter solely because it also produces 4-20 mA; input ranges, pin functions, supply polarity, output compliance, accuracy, and alarm behavior must also be verified. For a cross-brand redesign, treat the device as a functional replacement until pin and electrical compatibility have been independently established.

المقارنة مع البدائل

المعامل هذا المنتج AD694ARZ AD694BRZ
Brand Analog Devices Analog Devices Analog Devices
Package 16-lead SOIC 16-lead SOIC 16-lead SOIC
Product Type Monolithic current transmitter Monolithic current transmitter Monolithic current transmitter
Output Current Range 4-20 mA or 0-20 mA 4-20 mA or 0-20 mA 4-20 mA or 0-20 mA
Input Signal Type High-level voltage input High-level voltage input High-level voltage input
Precision Reference 10.000 V 10.000 V 10.000 V
Maximum Supply Voltage +36 V +36 V +36 V
Supply Configuration Single or dual supply operation Single or dual supply operation Single or dual supply operation
Alarm Function Open-loop alarm Open-loop alarm Open-loop alarm
Input Buffer Integrated input buffer amplifier Integrated input buffer amplifier Integrated input buffer amplifier

أبرز الفروقات

  • Combines current-loop conversion, input buffering, reference, and alarm functions (مقابلAD694ARZ)
  • Provides a footprint-compatible path for industrial transmitter modules (مقابلAD694BRZ)
  • Supports both single- and dual-supply instrumentation architectures (مقابلAD694ARZ)

ملاحظات التصميم

Configure the AD694JR for the supply arrangement shown in the manufacturer datasheet for the selected input range and loop-output mode. Place the required bypass capacitors close to the supply pins and provide a low-impedance ground return for the transmitter and loop receiver. Because the family supports supply voltages extending to +36 V, verify the selected operating point against the application's field-side voltage rather than assuming a low-voltage instrumentation rail.

Keep the buffered input and reference routing away from the current-loop output and power-supply nodes to avoid coupling high-energy or fast-changing signals into the measurement path. Use a continuous ground plane where practical, but route the loop return without unnecessary sharing with sensitive input-return paths. Follow the Analog Devices AD694 application guidance for decoupling, grounding, output protection, and the 16-lead SOIC land pattern.

Do not select between the AD694JR, AD694ARZ, and AD694BRZ based on the SOIC footprint alone. Confirm the required operating-temperature grade, qualification, electrical limits, and ordering information in the Analog Devices AD694 documentation. Also confirm whether the receiver expects 4-20 mA or 0-20 mA, and verify output compliance against the maximum loop resistance before enabling the transmitter.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for the AD694JR. Verify current declarations with Analog Devices for the exact ordering code.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

AD694JR datasheet AD694JR pinout AD694JR datasheet pdf AD694JR equivalent AD694JR replacement AD694JR cross reference AD694JR price AD694JR stock Analog Devices AD694JR AD694JR vs AD694ARZ AD694JR 16-SOIC footprint AD694JR 4-20 mA transmitter AD694JR process control circuit what is AD694JR

المكونات والمصطلحات ذات الصلة

Analog Devices AD694 AD694JR AD694ARZ AD694BRZ monolithic current transmitter current transmitter sensor and detector interface interface IC industrial instrumentation process control 4-20 mA current loop 0-20 mA output precision voltage reference 10.000 V reference input buffer amplifier open-loop alarm single-supply operation dual-supply operation 16-lead SOIC SOIC package family surface-mount package analog signal conditioning field-wired control RoHS REACH AEC-Q100
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر