Analog Devices

ADF4360-4BCPZRL - 1.45-1.75GHz Integer-N VCO | Analog Devices

MPN: ADF4360-4BCPZRL ✓ نشط
3.0 V to 3.6 V Vdss 24-lead WFQFN with exposed pad Package 1450 MHz to 1750 MHz Speed
الحد الأدنى للطلب: 1 |

ADF4360-4BCPZRL نظرة عامة

The Analog Devices ADF4360-4BCPZRL is a fully integrated integer-N frequency synthesizer and voltage-controlled oscillator designed for a 1450 MHz to 1750 MHz center-frequency range, with a 1600 MHz nominal design center, in a 24-lead WFQFN exposed-pad package. The device operates from a 3.0 V to 3.6 V supply and provides a divide-by-2 RF output from 725 MHz to 875 MHz. Its registers are controlled through a three-wire serial interface.

An integer-N synthesizer combines a phase-locked loop, frequency divider, reference divider, and VCO into one RF timing subsystem. Within the broader clock-and-timing hierarchy, this device sits below the PLL category as an RF clock generator and frequency synthesizer. The integrated VCO eliminates the need for a separate resonator in many RF signal chains, while the programmable divide ratios allow the synthesizer to generate multiple related output frequencies from a stable reference source.

Key features include a 1450 MHz to 1750 MHz main output range, 725 MHz to 875 MHz divide-by-2 operation, a three-wire control interface, and a 3.3 V supply operating region. The 24-lead WFQFN package includes an exposed thermal pad for board-level heat dissipation. These characteristics suit RF transceivers, up-converters, test equipment, and instrumentation requiring a compact local oscillator.

Technically, the ADF4360-4 combines an integer-N PLL with an integrated VCO and programmable RF output stages. The manufacturer datasheet identifies a designed center frequency of 1600 MHz and a divide-by-2 mode extending the usable output range to 725 MHz through 875 MHz. Because the feedback divider is integer, a reference frequency and integer division ratio must be selected carefully to achieve the desired channel without excessive phase noise degradation.

Typical applications include 1.4 GHz to 1.8 GHz RF transceiver local oscillators, low-frequency divide-by-2 outputs in the 725 MHz to 875 MHz band, and laboratory or industrial RF test systems. The integrated synthesizer can also serve wireless infrastructure when its specified frequency range, reference requirements, register programming, and thermal limits align with the target channel plan.

PCB design should preserve short RF routes, provide solid ground-plane continuity beneath the exposed pad, and place the reference and decoupling networks close to the device. Verify the loop-filter component values and register sequence against the manufacturer application guidance before bringing up a new board, particularly when phase noise or spur requirements are critical.

بدائل مباشرة لـ ADF4360-4BCPZRL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADF4360-4BCPZRL (نفس عامل الشكل والبصمة) — يختلف في Divide-by-2 Output Frequency Range, Package.

Analog Devices
Divide-by-2 Output Frequency Range: 175 MHz to 900 MHz
Package: 24-lead LFCSP with exposed pad
قارن مع ADF4360-4BCPZRL →

ADF4360-4BCPZRL7

✅ بديل مباشر
📦 24-lead WFQFN with exposed pad
Same 1450 MHz to 1750 MHz electrical range and 24-lead WFQFN footprint; order-code and shipment-format distinction only

📋 بديل مرجعي (غير موجود في الكتالوج)

ADF4360-4BCPZ

✅ بديل مباشر
📦 24-lead WFQFN with exposed pad
Same 1450 MHz to 1750 MHz electrical range and 24-lead WFQFN footprint; order-code and shipment-format distinction only

📋 بديل مرجعي (غير موجود في الكتالوج)

ADF4360-4BCPZRL المواصفات

Device Type Integer-N synthesizer and integrated VCO
Main Output Frequency Range 1450 MHz to 1750 MHz
Designed Center Frequency 1600 MHz
Divide-by-2 Output Frequency Range 725 MHz to 875 MHz
Reference Input Frequency Range 10 MHz to 250 MHz
Supply Voltage Range 3.0 V to 3.6 V
Nominal Supply Voltage 3.3 V
Control Interface 3-wire serial interface
Synthesizer Architecture Integer-N PLL
VCO Fully integrated voltage-controlled oscillator
العلبة 24-lead WFQFN with exposed pad
عدد الأطراف 24 pins
نوع التركيب Surface mount
Shipping Format Tape and reel
Maximum Reference Input Frequency 250 MHz
Minimum Reference Input Frequency 10 MHz

دليل تكوين أطراف ADF4360-4BCPZRL 24-lead wfqfn with exposed pad

تكوين الأطراف لـ ADF4360-4BCPZRL (حزمة 24-lead wfqfn with exposed pad). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 24-lead wfqfn with exposed pad لـ ADF4360-4BCPZRL

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADF4360-4BCPZRL.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADF4360-4BCPZRL مناسب لـ 6 التطبيقs: RF Transceiver Local Oscillator, Divide-by-2 RF Output, RF Test and Measurement Equipment, Industrial RF Monitoring System, Wireless Communication Module, Laboratory Signal Generator.

🌐

RF Transceiver Local Oscillator

The ADF4360-4BCPZRL fits a 1.45 GHz to 1.8 GHz transceiver requiring a programmable local oscillator. Its integer-N PLL and integrated VCO generate the main output across 1450 MHz to 1750 MHz, avoiding a separate VCO and resonator assembly. The three-wire interface allows the baseband or FPGA controller to set the channel and divide ratio. The principal engineering trade-off is the relationship between reference frequency, integer feedback division, phase noise, and spur performance; choose the reference plan carefully before freezing the RF layout.

📻

Divide-by-2 RF Output

The divide-by-2 output of the ADF4360-4BCPZRL provides a usable 725 MHz to 875 MHz signal while the integrated synthesizer operates in its 1450 MHz to 1750 MHz design band. This can simplify frequency planning in RF front ends that require both related outputs or a lower-frequency LO. Designers should verify the divider configuration through the device registers and confirm that the selected output retains the required phase-noise and spur characteristics for the receiver or test instrument.

🖥️

RF Test and Measurement Equipment

The ADF4360-4BCPZRL can serve as a compact programmable RF source in test equipment covering 1450 MHz to 1750 MHz. Integrating the VCO and integer-N PLL reduces the number of discrete frequency-generation blocks, while the three-wire control interface supports automated channel selection from a test controller. For metrology-grade equipment, evaluate phase-noise integration, spur levels, reference accuracy, output-power calibration, and settling time rather than treating frequency range alone as sufficient.

🏭

Industrial RF Monitoring System

The ADF4360-4BCPZRL supports industrial RF monitoring equipment operating in the 1450 MHz to 1750 MHz band. A programmable local oscillator can sweep or select channels for sensor interrogation, telemetry, or industrial radio links while preserving a compact surface-mount implementation. The system designer must ensure that the reference source meets phase-noise requirements and that the integer-N division ratio supports the intended frequency plan. Thermal management should be assessed across the full 3.0 V to 3.6 V supply range and highest expected operating temperature.

📱

Wireless Communication Module

The ADF4360-4BCPZRL can provide a local oscillator for wireless communication equipment deployed in the 1450 MHz to 1750 MHz RF band. Integrating the integer-N synthesizer and VCO simplifies RF channel generation and allows software-controlled frequency selection through the three-wire interface. The compact 24-lead WFQFN package also supports dense radio layouts, although exposed-pad grounding and reference isolation remain essential. Validate regulatory channel requirements and coexistence performance during system integration.

🔧

Laboratory Signal Generator

The ADF4360-4BCPZRL is suitable for a compact laboratory RF generator or frequency-conversion reference covering 1450 MHz to 1750 MHz. The integrated VCO reduces component count, and register-based programming permits repeatable preset channels and calibration sequences. The 725 MHz to 875 MHz divide-by-2 range provides additional design flexibility. For precision measurement results, engineers should characterize phase noise, close-in spurs, reference multiplication ratio, output leveling, and settling behavior across the required frequency span.

ملخص المنتجات الموصى بها

ADF4360-4BCPZRL7 Same RF frequency range and pin-compatible order option يُستخدم في: RF Transceiver Local Oscillator, Divide-by-2 RF Output, RF Test and Measurement Equipment, Industrial RF Monitoring System, Wireless Communication Module, Laboratory Signal Generator ADF4360-4BCPZ Same RF frequency range and pin-compatible order option يُستخدم في: RF Transceiver Local Oscillator, Divide-by-2 RF Output, RF Test and Measurement Equipment, Industrial RF Monitoring System, Wireless Communication Module, Laboratory Signal Generator
What is the operating frequency range of the ADF4360-4BCPZRL?
The ADF4360-4BCPZRL provides a main RF output from 1450 MHz to 1750 MHz and supports a divide-by-2 output from 725 MHz to 875 MHz. According to the Analog Devices ADF4360-4 manufacturer datasheet, the synthesizer is designed around a 1600 MHz center frequency. These two operating bands should be matched to the RF channel plan rather than treated as one continuous tuning range.
Where can I download the ADF4360-4BCPZRL datasheet PDF?
The official Analog Devices ADF4360-4 datasheet PDF is available from the manufacturer product page at analog.com. It describes the 1450 MHz to 1750 MHz output range, 725 MHz to 875 MHz divide-by-2 mode, 3-wire register interface, and 24-lead WFQFN package. Use the pin-description table and register definitions from that PDF when assigning PCB connections and programming the synthesizer.
Where can I find the ADF4360-4BCPZRL pinout?
The ADF4360-4BCPZRL pinout is documented in the pin-description table of the official Analog Devices ADF4360-4 manufacturer datasheet. The device uses a 24-lead WFQFN exposed-pad package with an exposed ground pad. Before routing a board, assign every lead from the datasheet table and connect the exposed pad to the ground plane using the package land pattern recommended by the manufacturer.
What are the key specifications of ADF4360-4BCPZRL that engineers should know?
The ADF4360-4BCPZRL is a 3.0 V to 3.6 V integer-N frequency synthesizer with an integrated VCO, a 1450 MHz to 1750 MHz main output range, and a 725 MHz to 875 MHz divide-by-2 range. According to the Analog Devices manufacturer datasheet, programming is performed through a three-wire interface. The device is packaged in a 24-lead WFQFN with an exposed pad for board-level thermal management.
What is the difference between ADF4360-4BCPZRL and ADF4360-4BCPZ?
ADF4360-4BCPZRL and ADF4360-4BCPZ identify the same ADF4360-4 device and 24-lead WFQFN electrical configuration, while their order codes refer to different shipment formats. The target MPN is identified as tape-and-reel packaging, whereas the non-RL order code is listed separately. Confirm the required assembly format before substitution because mechanical packing, reel quantities, and procurement can differ.
Can ADF4360-4BCPZRL replace another ADF4360 family member?
The ADF4360-4BCPZRL is a drop-in fit only when the replacement has the same 24-lead WFQFN pinout and the required 1450 MHz to 1750 MHz operating range. The ADF4360-1 and ADF4360-0 family members use a compatible package but cover different VCO bands, so they are not direct replacements for an existing 1.45 GHz to 1.75 GHz design. Validate frequency coverage, register configuration, reference setup, and output requirements before substitution.
What can replace the ADF4360-4BCPZRL?
The closest documented drop-in choice is ADF4360-4BCPZRL7 because it retains the ADF4360-4 frequency band, 24-lead WFQFN package, 3.3 V supply, and integer-N synthesizer architecture. It is primarily an order-code or packaging option rather than a different RF design. No cross-manufacturer equivalent with verified pin compatibility and equivalent electrical parameters was identified, so a different synthesizer should not be treated as a drop-in replacement without engineering validation.
Is the ADF4360-4BCPZRL the same as ADF4360-4BCPZRL7?
ADF4360-4BCPZRL and ADF4360-4BCPZRL7 refer to the ADF4360-4 integrated synthesizer and VCO in the same 24-lead WFQFN exposed-pad package. Their documented electrical operating class is the 1450 MHz to 1750 MHz range with divide-by-2 operation from 725 MHz to 875 MHz. The order-code suffix concerns ordering or shipment configuration, so the manufacturer ordering table should determine which suffix is required for production.
When should I choose the ADF4360-4BCPZRL over another ADF4360 variant?
Choose the ADF4360-4BCPZRL when the required local oscillator lies between 1450 MHz and 1750 MHz, or when its 725 MHz to 875 MHz divide-by-2 output is useful. According to the Analog Devices manufacturer datasheet, the nominal design center is 1600 MHz. Other members of the ADF4360 family target different VCO bands, so select them only when their lower and upper limits match the intended channel plan.
Is the ADF4360-4BCPZRL suitable for RF transceiver and test equipment applications?
The ADF4360-4BCPZRL is suitable for RF systems that operate within its 1450 MHz to 1750 MHz synthesizer range or 725 MHz to 875 MHz divide-by-2 range. Its integrated integer-N PLL and VCO can serve as a local oscillator in transceivers, while the compact 24-lead WFQFN package supports compact RF boards. System-level phase-noise, spur, output-power, and temperature requirements must still be evaluated.
How should the 3-wire interface be connected when designing an ADF4360-4BCPZRL circuit?
The ADF4360-4BCPZRL uses a three-wire serial interface to control its on-chip registers. According to the Analog Devices manufacturer datasheet, all register control is performed through this interface. Follow the datasheet logic-level, clock timing, data setup, and chip-select requirements, and terminate unused interface lines appropriately. Confirm the reference-clock and decoupling connections before attempting a first lock.
What thermal and PCB considerations apply to the ADF4360-4BCPZRL?
The ADF4360-4BCPZRL requires its 24-lead WFQFN exposed pad to be connected to a solid ground plane to provide both electrical and thermal paths. Place input and output decoupling capacitors close to their corresponding pins, keep the reference input short, and preserve continuous return paths beneath the package. Review the manufacturer power-dissipation guidance against the highest expected supply voltage and output-current operating condition.
Where can I buy ADF4360-4BCPZRL online?
Use the Request a Quote form on this page to request ADF4360-4BCPZRL pricing, current inventory, minimum order quantity, and production lead time. The exact MPN is also listed under the manufacturer order code ADF4360-4BCPZRL with a 24-lead WFQFN exposed-pad package and tape-and-reel shipment format. A written quotation is the appropriate route for an exact-fit, quantity-specific procurement request.
What is the price of ADF4360-4BCPZRL?
Current unit pricing for the exact ADF4360-4BCPZRL order code should be requested through the Request a Quote form on this page. The commercial quotation should state quantity breaks, reel quantities, currency, stock status, and lead time for the exact 24-lead WFQFN tape-and-reel configuration. This avoids confusion with other ADF4360 frequency-band variants or different order codes.
Is ADF4360-4BCPZRL in stock and what is its lead time?
Current stock and lead time for ADF4360-4BCPZRL should be confirmed through the Request a Quote form on this page. Enter the required quantity, production schedule, and whether reel breaks are acceptable. The exact order code is identified as ADF4360-4BCPZRL in 24-lead WFQFN exposed-pad tape-and-reel packaging, allowing the quotation to be tied to the intended manufacturing configuration.

بيانات مرجعية هندسية لـ ADF4360-4BCPZRL — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADF4360-4BCPZRL when the design requires a 3.3 V integer-N RF synthesizer with an integrated VCO, a 1450 MHz to 1750 MHz main output, or an 725 MHz to 875 MHz divide-by-2 output. ADF4360-4BCPZRL7 is the closest documented order option when its packaging and purchasing configuration meet the assembly requirements; ADF4360-4BCPZ is the corresponding non-RL order code. Both retain the same 24-lead WFQFN footprint and RF operating class. Do not choose ADF4360-1, ADF4360-0, ADF4360-6, or ADF4360-7 solely for package similarity because their VCO frequency ranges differ. Before finalizing any substitution, confirm the manufacturer ordering table, reference-input plan, register behavior, exposed-pad layout, operating temperature, phase noise, and output power.

المقارنة مع البدائل

المعامل هذا المنتج ADF4360-4BCPZRL7 ADF4360-4BCPZ
Brand Analog Devices Analog Devices Analog Devices
Package 24-lead WFQFN with exposed pad 24-lead WFQFN with exposed pad 24-lead WFQFN with exposed pad
Main Output Frequency Range 1450 MHz to 1750 MHz 1450 MHz to 1750 MHz 1450 MHz to 1750 MHz
Designed Center Frequency 1600 MHz 1600 MHz 1600 MHz
Divide-by-2 Output Range 725 MHz to 875 MHz 725 MHz to 875 MHz 725 MHz to 875 MHz
Supply Voltage Range 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V
Reference Input Frequency Range 10 MHz to 250 MHz 10 MHz to 250 MHz 10 MHz to 250 MHz
Control Interface 3-wire serial interface 3-wire serial interface 3-wire serial interface
Synthesizer Architecture Integer-N PLL with integrated VCO Integer-N PLL with integrated VCO Integer-N PLL with integrated VCO

أبرز الفروقات

  • Exact ADF4360-4 frequency-band compatibility (مقابلADF4360-4BCPZRL7)
  • No frequency-band change during substitution (مقابلADF4360-4BCPZ)
  • Three-wire control simplifies digital integration (مقابلADF4360-4BCPZRL7)

ملاحظات التصميم

Use the manufacturer land pattern for the 24-lead WFQFN exposed-pad package. Connect the exposed pad to a continuous ground plane, keep the reference input route short, and place decoupling capacitors close to their power pins. The ground reference for the VCO and PLL section should remain continuous beneath and around the device to minimize supply disturbance and reference-induced phase noise.

Separate the synthesizer reference path from sensitive RF and digital return currents wherever possible. Keep the three-wire control traces away from the VCO and power-supply nodes, use a solid ground reference beneath the interface, and avoid routing high-current switching-node copper beneath the oscillator. A clean reference return is particularly important because the integer-N feedback ratio can amplify reference-phase noise at the output.

Do not substitute ADF4360-1 or ADF4360-0 parts merely because they use the same 24-lead package; their VCO bands differ from the ADF4360-4's 1450 MHz to 1750 MHz range. Select the reference frequency and integer division ratio together, then verify the complete register sequence and lock behavior. Confirm the required ADF4360-4 order code and tape-and-reel configuration before releasing a production BOM.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer datasheet and product page establish the device function and package, but no explicit compliance declarations were identified in the cited source material.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-4BCPZRL datasheet ADF4360-4BCPZRL pinout ADF4360-4BCPZRL datasheet pdf ADF4360-4BCPZRL equivalent ADF4360-4BCPZRL replacement ADF4360-4BCPZRL vs ADF4360-4BCPZRL7 ADF4360-4BCPZRL 1450 1750 MHz ADF4360-4BCPZRL WFQFN pinout ADF4360-4BCPZRL RF transceiver ADF4360-4BCPZRL price ADF4360-4BCPZRL stock Analog Devices ADF4360-4BCPZRL

المكونات والمصطلحات ذات الصلة

Analog Devices ADF4360-4BCPZRL ADF4360-4BCPZRL7 ADF4360-4BCPZ integer-N synthesizer phase-locked loop PLL voltage-controlled oscillator VCO frequency synthesizer clock generator 3-wire serial interface integer-N divider divide-by-2 output 1450 MHz to 1750 MHz 725 MHz to 875 MHz 1600 MHz center frequency 3.3 V supply 24-lead WFQFN WFQFN exposed pad QFN package family surface mount RF transceiver test and measurement equipment phase noise
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر