ADF4360-4BCPZRL - 1.45-1.75GHz Integer-N VCO | Analog Devices
MPN: ADF4360-4BCPZRL ✓ सक्रियADF4360-4BCPZRL अवलोकन
An integer-N synthesizer combines a phase-locked loop, frequency divider, reference divider, and VCO into one RF timing subsystem. Within the broader clock-and-timing hierarchy, this device sits below the PLL category as an RF clock generator and frequency synthesizer. The integrated VCO eliminates the need for a separate resonator in many RF signal chains, while the programmable divide ratios allow the synthesizer to generate multiple related output frequencies from a stable reference source.
Key features include a 1450 MHz to 1750 MHz main output range, 725 MHz to 875 MHz divide-by-2 operation, a three-wire control interface, and a 3.3 V supply operating region. The 24-lead WFQFN package includes an exposed thermal pad for board-level heat dissipation. These characteristics suit RF transceivers, up-converters, test equipment, and instrumentation requiring a compact local oscillator.
Technically, the ADF4360-4 combines an integer-N PLL with an integrated VCO and programmable RF output stages. The manufacturer datasheet identifies a designed center frequency of 1600 MHz and a divide-by-2 mode extending the usable output range to 725 MHz through 875 MHz. Because the feedback divider is integer, a reference frequency and integer division ratio must be selected carefully to achieve the desired channel without excessive phase noise degradation.
Typical applications include 1.4 GHz to 1.8 GHz RF transceiver local oscillators, low-frequency divide-by-2 outputs in the 725 MHz to 875 MHz band, and laboratory or industrial RF test systems. The integrated synthesizer can also serve wireless infrastructure when its specified frequency range, reference requirements, register programming, and thermal limits align with the target channel plan.
PCB design should preserve short RF routes, provide solid ground-plane continuity beneath the exposed pad, and place the reference and decoupling networks close to the device. Verify the loop-filter component values and register sequence against the manufacturer application guidance before bringing up a new board, particularly when phase noise or spur requirements are critical.
के लिए ड्रॉप-इन विकल्प ADF4360-4BCPZRL — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADF4360-4BCPZRL (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Divide-by-2 Output Frequency Range, Package.
ADF4360-4BCPZRL7
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADF4360-4BCPZ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADF4360-4BCPZRL विशेषताएं
| Device Type | Integer-N synthesizer and integrated VCO |
| Main Output Frequency Range | 1450 MHz to 1750 MHz |
| Designed Center Frequency | 1600 MHz |
| Divide-by-2 Output Frequency Range | 725 MHz to 875 MHz |
| Reference Input Frequency Range | 10 MHz to 250 MHz |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Control Interface | 3-wire serial interface |
| Synthesizer Architecture | Integer-N PLL |
| VCO | Fully integrated voltage-controlled oscillator |
| पैकेज | 24-lead WFQFN with exposed pad |
| पिन काउंट | 24 pins |
| माउंटिंग प्रकार | Surface mount |
| Shipping Format | Tape and reel |
| Maximum Reference Input Frequency | 250 MHz |
| Minimum Reference Input Frequency | 10 MHz |
ADF4360-4BCPZRL 24-lead wfqfn with exposed pad पिन कॉन्फ़िगरेशन गाइड
ADF4360-4BCPZRL (24-lead wfqfn with exposed pad पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADF4360-4BCPZRL.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ADF4360-4BCPZRL के लिए उपयुक्त है 6 अनुप्रयोगs: RF Transceiver Local Oscillator, Divide-by-2 RF Output, RF Test and Measurement Equipment, Industrial RF Monitoring System, Wireless Communication Module, Laboratory Signal Generator.
RF Transceiver Local Oscillator
The ADF4360-4BCPZRL fits a 1.45 GHz to 1.8 GHz transceiver requiring a programmable local oscillator. Its integer-N PLL and integrated VCO generate the main output across 1450 MHz to 1750 MHz, avoiding a separate VCO and resonator assembly. The three-wire interface allows the baseband or FPGA controller to set the channel and divide ratio. The principal engineering trade-off is the relationship between reference frequency, integer feedback division, phase noise, and spur performance; choose the reference plan carefully before freezing the RF layout.
अनुशंसित
Divide-by-2 RF Output
The divide-by-2 output of the ADF4360-4BCPZRL provides a usable 725 MHz to 875 MHz signal while the integrated synthesizer operates in its 1450 MHz to 1750 MHz design band. This can simplify frequency planning in RF front ends that require both related outputs or a lower-frequency LO. Designers should verify the divider configuration through the device registers and confirm that the selected output retains the required phase-noise and spur characteristics for the receiver or test instrument.
अनुशंसित
RF Test and Measurement Equipment
The ADF4360-4BCPZRL can serve as a compact programmable RF source in test equipment covering 1450 MHz to 1750 MHz. Integrating the VCO and integer-N PLL reduces the number of discrete frequency-generation blocks, while the three-wire control interface supports automated channel selection from a test controller. For metrology-grade equipment, evaluate phase-noise integration, spur levels, reference accuracy, output-power calibration, and settling time rather than treating frequency range alone as sufficient.
अनुशंसित
Industrial RF Monitoring System
The ADF4360-4BCPZRL supports industrial RF monitoring equipment operating in the 1450 MHz to 1750 MHz band. A programmable local oscillator can sweep or select channels for sensor interrogation, telemetry, or industrial radio links while preserving a compact surface-mount implementation. The system designer must ensure that the reference source meets phase-noise requirements and that the integer-N division ratio supports the intended frequency plan. Thermal management should be assessed across the full 3.0 V to 3.6 V supply range and highest expected operating temperature.
अनुशंसित
Wireless Communication Module
The ADF4360-4BCPZRL can provide a local oscillator for wireless communication equipment deployed in the 1450 MHz to 1750 MHz RF band. Integrating the integer-N synthesizer and VCO simplifies RF channel generation and allows software-controlled frequency selection through the three-wire interface. The compact 24-lead WFQFN package also supports dense radio layouts, although exposed-pad grounding and reference isolation remain essential. Validate regulatory channel requirements and coexistence performance during system integration.
अनुशंसित
Laboratory Signal Generator
The ADF4360-4BCPZRL is suitable for a compact laboratory RF generator or frequency-conversion reference covering 1450 MHz to 1750 MHz. The integrated VCO reduces component count, and register-based programming permits repeatable preset channels and calibration sequences. The 725 MHz to 875 MHz divide-by-2 range provides additional design flexibility. For precision measurement results, engineers should characterize phase noise, close-in spurs, reference multiplication ratio, output leveling, and settling behavior across the required frequency span.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ADF4360-4BCPZRL — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ADF4360-4BCPZRL7 | ADF4360-4BCPZ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad |
| Main Output Frequency Range | 1450 MHz to 1750 MHz | 1450 MHz to 1750 MHz | 1450 MHz to 1750 MHz |
| Designed Center Frequency | 1600 MHz | 1600 MHz | 1600 MHz |
| Divide-by-2 Output Range | 725 MHz to 875 MHz | 725 MHz to 875 MHz | 725 MHz to 875 MHz |
| Supply Voltage Range | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Reference Input Frequency Range | 10 MHz to 250 MHz | 10 MHz to 250 MHz | 10 MHz to 250 MHz |
| Control Interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface |
| Synthesizer Architecture | Integer-N PLL with integrated VCO | Integer-N PLL with integrated VCO | Integer-N PLL with integrated VCO |
मुख्य विशेषताएँ
- Exact ADF4360-4 frequency-band compatibility (बनामADF4360-4BCPZRL7)
- No frequency-band change during substitution (बनामADF4360-4BCPZ)
- Three-wire control simplifies digital integration (बनामADF4360-4BCPZRL7)
डिज़ाइन नोट्स
Use the manufacturer land pattern for the 24-lead WFQFN exposed-pad package. Connect the exposed pad to a continuous ground plane, keep the reference input route short, and place decoupling capacitors close to their power pins. The ground reference for the VCO and PLL section should remain continuous beneath and around the device to minimize supply disturbance and reference-induced phase noise.
Separate the synthesizer reference path from sensitive RF and digital return currents wherever possible. Keep the three-wire control traces away from the VCO and power-supply nodes, use a solid ground reference beneath the interface, and avoid routing high-current switching-node copper beneath the oscillator. A clean reference return is particularly important because the integer-N feedback ratio can amplify reference-phase noise at the output.
Do not substitute ADF4360-1 or ADF4360-0 parts merely because they use the same 24-lead package; their VCO bands differ from the ADF4360-4's 1450 MHz to 1750 MHz range. Select the reference frequency and integer division ratio together, then verify the complete register sequence and lock behavior. Confirm the required ADF4360-4 order code and tape-and-reel configuration before releasing a production BOM.
अनुपालन जानकारी
The manufacturer datasheet and product page establish the device function and package, but no explicit compliance declarations were identified in the cited source material.