Analog Devices

ADF4371BCCZ-RL7 - 32 GHz Wideband PLL/VCO | Analog Devices

MPN: ADF4371BCCZ-RL7 ✓ نشط
48-lead TFLGA with exposed pad Package 62.5 MHz Speed
الحد الأدنى للطلب: 1 |

ADF4371BCCZ-RL7 نظرة عامة

The Analog Devices ADF4371BCCZ-RL7 is an integer-N and fractional-N frequency synthesizer with an integrated wideband microwave voltage-controlled oscillator, providing output frequencies from 62.5 MHz to 32 GHz in a 48-lead TFLGA package with exposed pad. The device supports four outputs and requires an external reference frequency and loop filter for phase-locked-loop implementation.

A frequency synthesizer is an electronic timing component that generates a stable, programmable output signal from a reference frequency. This ADF4371 belongs to the broader hierarchy of clock and timing ICs, RF synthesizers, phase-locked loops, and microwave signal-chain components. Its wide tuning range makes it useful where multiple high-frequency carriers must be synthesized locally rather than generated by a separate oscillator chain.

The headline capabilities include a maximum generated frequency of 32 GHz, a minimum generated frequency of 62.5 MHz, four outputs, and support for both integer-N and fractional-N synthesis. The 48-TFLGA exposed-pad package is intended for compact RF modules and high-density microwave assemblies. Compared with a discrete VCO and divider arrangement, the integrated synthesizer centralizes frequency generation, phase detection, feedback, and programmable output management.

According to the Analog Devices ADF4371 datasheet, the architecture uses an external reference and external loop filter to implement the phase-locked loop. The external filter permits engineering control over loop bandwidth, phase-noise behavior, reference-spur suppression, and lock characteristics. Integer-N operation supports exact integer relationships between the reference and output, while fractional-N operation expands practical division ratios and output-planning flexibility.

Typical uses include microwave test equipment, phased-array radar, radio-frequency instrumentation, microwave synthesizers, and wideband communication modules. The four-output architecture can reduce the number of separate synthesis paths in multi-channel systems when the required frequencies and isolation are compatible with the device architecture.

PCB implementation requires careful treatment of the exposed pad, supply decoupling, reference routing, RF outputs, and the external loop-filter network. Follow the pin-description table and layout guidance in the manufacturer datasheet during schematic capture and PCB placement. The exposed-pad thermal path must be connected according to the package recommendation to avoid localized heating.

This page combines the manufacturer specifications, package details, application guidance, practical design notes, and verified sourcing information for engineers evaluating the ADF4371BCCZ-RL7 as a wideband microwave PLL/VCO building block.

بدائل مباشرة لـ ADF4371BCCZ-RL7 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADF4371BCCZ-RL7 (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type.

Analog Devices
Package: 48-pin TFLGA with exposed pad
Product Type: Integer-N or fractional-N PLL frequency synthesizer
قارن مع ADF4371BCCZ-RL7 →

ADF4371BCCZ

✅ بديل مباشر
Analog Devices
📦 48-TFLGA Exposed Pad
Integer-N or fractional-N PLL frequency synthesizer · 62.5 MHz · 32,000 MHz (32 GHz) · 62.5 MHz to 32,000 MHz · 10 MHz · 600 MHz · 10 MHz to 600 MHz · 39 bit

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADF4371BCCZ-RL7 المواصفات

Product Type Integer-N and fractional-N RF frequency synthesizer with integrated VCO
Minimum Generated Frequency 62.5 MHz
Maximum Generated Frequency 32 GHz
Output Count 4 outputs
Synthesis Modes Integer-N and fractional-N
Reference Input External reference frequency
Loop Filter External
Integrated VCO Yes
VCO Frequency Range 62.5 MHz to 32 GHz
العلبة 48-lead TFLGA with exposed pad
نوع التركيب Surface mount

دليل تكوين أطراف ADF4371BCCZ-RL7 48-lead tflga with exposed pad

تكوين الأطراف لـ ADF4371BCCZ-RL7 (حزمة 48-lead tflga with exposed pad). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 48-lead tflga with exposed pad لـ ADF4371BCCZ-RL7

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADF4371BCCZ-RL7.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADF4371BCCZ-RL7 مناسب لـ 6 التطبيقs: Microwave Test Equipment, Phased-Array Radar, Wideband Communication Modules, RF Instrumentation, Frequency-Selective Radar and EW, RF Signal Generators.

🖥️

Microwave Test Equipment

The ADF4371BCCZ-RL7 fits precision microwave source architectures that require programmable local oscillator generation across a broad frequency range. Its integrated VCO supports generation from 62.5 MHz to 32 GHz, avoiding a separate microwave oscillator and divider chain. The four outputs can support modulation, reference, or multi-channel measurement functions when their routing and isolation requirements are satisfied. Use an external reference and tuned loop filter to establish the required phase-noise and spur performance.

✈️

Phased-Array Radar

The ADF4371BCCZ-RL7 is suitable for phased-array radar modules requiring local programmable frequency generation up to 32 GHz. Fractional-N synthesis provides finer output-frequency planning than integer-N ratios alone, while the four outputs can simplify multi-function signal distribution. System design must address reference phase noise, channel calibration, output isolation, and loop-filter bandwidth. A stable reference and carefully routed feedback path are essential for repeatable coherent operation.

🌐

Wideband Communication Modules

The ADF4371BCCZ-RL7 supports wideband communication modules that need multiple programmable microwave frequencies from a compact synthesizer. Its 62.5 MHz-to-32 GHz range covers a substantial portion of microwave and millimeter-wave equipment bands, while four outputs can reduce the number of discrete synthesis functions. The external loop filter must be tuned for the desired reference-spur suppression and lock time. RF layout also needs controlled impedance and short return paths.

📡

RF Instrumentation

The ADF4371BCCZ-RL7 is appropriate for RF instrumentation requiring a compact, programmable signal source with outputs extending to 32 GHz. Integer-N operation is useful for exact reference-to-output ratios, while fractional-N mode gives additional flexibility when an integer ratio cannot meet the requested frequency plan. Four outputs can simplify sharing within an instrument when their individual frequency and isolation requirements are met. Designers should characterize phase noise, spurs, and lock behavior for each loop-filter configuration.

📻

Frequency-Selective Radar and EW

The ADF4371BCCZ-RL7 can serve as the programmable RF core in frequency-selective radar, electronic-warfare, and signal-analysis modules that require rapid selection across microwave frequencies. Its maximum generated frequency of 32 GHz supports high-band RF generation, while integer-N and fractional-N modes offer different planning precision. A low-noise reference and optimized external loop filter directly influence close-in phase noise. Hardware engineers must also verify output power, spur levels, settling behavior, and channel isolation against the system specification.

📶

RF Signal Generators

The ADF4371BCCZ-RL7 fits a local oscillator or RF signal-generator design requiring programmable output from 62.5 MHz to 32 GHz. Integrating the VCO and PLL functions reduces the component count compared with a discrete oscillator, divider, and phase-detector arrangement. Four outputs can serve separate modulation or reference paths when their routing supports the intended use. To obtain usable phase noise and reference spurs, tune the external loop filter and preserve a low-noise reference connection.

ملخص المنتجات الموصى بها

EVAL-ADF4371 Evaluation platform for the ADF4371 frequency synthesizer يُستخدم في: Microwave Test Equipment, Phased-Array Radar, Wideband Communication Modules, RF Instrumentation, Frequency-Selective Radar and EW, RF Signal Generators EVAL-ADF4371SD2Z ADF4371 evaluation-board configuration with SMA connections يُستخدم في: Microwave Test Equipment, Phased-Array Radar, Wideband Communication Modules, RF Instrumentation, Frequency-Selective Radar and EW, RF Signal Generators
What is the operating frequency range of ADF4371BCCZ-RL7?
The ADF4371BCCZ-RL7 supports generated frequencies from 62.5 MHz to 32 GHz. According to the Analog Devices ADF4371 datasheet, the integrated wideband microwave VCO covers this range when the device is configured as an integer-N or fractional-N synthesizer with an external reference and loop filter. The exact programmable output frequency also depends on the reference frequency, divider settings, and PLL configuration.
What type of component is the ADF4371BCCZ-RL7?
The ADF4371BCCZ-RL7 is a clock and timing IC that combines an integrated microwave VCO with PLL synthesis functions. It supports integer-N and fractional-N frequency generation, provides four outputs, and operates from a 62.5 MHz minimum generated frequency to a 32 GHz maximum generated frequency. The device is packaged in a 48-lead TFLGA with exposed pad.
Does the ADF4371BCCZ-RL7 need an external loop filter?
Yes, the ADF4371BCCZ-RL7 requires an external loop filter to implement the phase-locked loop. According to the Analog Devices ADF4371 datasheet, the external reference and loop filter allow the designer to set the loop dynamics. Filter components directly influence lock behavior, phase noise, reference spurs, and the response to output-frequency changes.
Where can I download the ADF4371BCCZ-RL7 datasheet PDF?
The official ADF4371BCCZ-RL7 datasheet PDF is available from the Analog Devices ADF4371 product page and the linked manufacturer data sheet. The document describes the 62.5 MHz-to-32 GHz synthesis range, integer-N and fractional-N operation, four outputs, electrical characteristics, register architecture, and recommended application layouts. Use the package pin-description table when assigning connections.
Where can I find the ADF4371BCCZ-RL7 pinout and package drawing?
The ADF4371BCCZ-RL7 pin assignments and package drawing are found in the pin-description and mechanical-drawing sections of the Analog Devices ADF4371 datasheet. The component uses a 48-lead TFLGA exposed-pad package. The exposed pad is a thermal and electrical land that requires a PCB footprint matching the manufacturer drawing; use the datasheet pin table rather than a generic 48-pin LGA assumption.
How many outputs does the ADF4371BCCZ-RL7 provide?
The ADF4371BCCZ-RL7 provides four outputs. Its integrated VCO and synthesis architecture allow programmable microwave frequency generation without a separate VCO block for each channel. Output planning must still account for the supported divider and routing options, RF return-loss requirements, isolation between channels, and the impedance of the selected transmission lines.
When should I choose the ADF4371BCCZ-RL7 for a microwave design?
Choose the ADF4371BCCZ-RL7 when a design requires programmable generation between 62.5 MHz and 32 GHz using either integer-N or fractional-N synthesis. It is especially useful when four integrated outputs can simplify a microwave source, test instrument, or phased-array module. The design must also allow an external loop filter, reference network, and the PCB thermal treatment required by the 48-lead exposed-pad package.
What is the difference between integer-N and fractional-N operation in ADF4371BCCZ-RL7?
Integer-N operation maintains an integer division relationship between the reference and output frequencies, while fractional-N operation allows additional frequency granularity beyond integer ratios. The Analog Devices ADF4371 datasheet states that the device supports both modes. Integer-N mode is straightforward for exact ratios, whereas fractional-N mode offers finer frequency planning at the cost of requiring careful loop-filter and spur analysis.
What is the best drop-in replacement for ADF4371BCCZ-RL7?
ADF4371BCCZ is the closest documented same-configuration alternative to the reel-packed ADF4371BCCZ-RL7 because it uses the same ADF4371 device and 48-lead TFLGA exposed-pad package. Confirm supply configuration, temperature grade, register compatibility, and procurement requirements before substitution. No cross-manufacturer alternative was established with documented pin-for-pin compatibility and equivalent RF parameters.
Can ADF4371BCCZ replace ADF4371BCCZ-RL7 on the same PCB?
ADF4371BCCZ can serve as the same-device alternative when its package, electrical grade, and ordering configuration match the original design. Both belong to the 48-lead TFLGA exposed-pad ADF4371 family and provide a maximum generated frequency of 32 GHz with four outputs. Before replacement, verify the original suffix requirements, temperature range, pin assignments, exposed-pad layout, and assembly supply format.
Is the ADF4371BCCZ-RL7 suitable for phased-array radar?
The ADF4371BCCZ-RL7 is suitable for phased-array radar when local programmable RF generation, channel integration, and phase coherence are required. Its 62.5 MHz-to-32 GHz range covers many microwave radar bands, while fractional-N mode supports flexible frequency planning. Loop filtering, reference distribution, output phase, channel-to-channel isolation, and calibration must be addressed at system level.
How should the exposed pad be handled on the ADF4371BCCZ-RL7 PCB?
The exposed pad must be implemented as a thermal and electrical land using the footprint and layout instructions in the Analog Devices ADF4371 datasheet. Connect it to the appropriate ground reference through the recommended via and copper arrangement, keep the RF outputs and sensitive reference routes away from the pad region, and maintain short return paths. Follow the manufacturer layout for vias, decoupling, and exposed-pad geometry.
What is the current price of ADF4371BCCZ-RL7?
Current commercial pricing for the ADF4371BCCZ-RL7 should be obtained through the Request a Quote form on this page. The form supports current stock, quantity, lead-time, and supply-status inquiries for the exact 48-lead TFLGA ordering configuration. Pricing can change with market conditions, volume, and component availability, so a formal quote is the appropriate purchasing response.
Where can I buy ADF4371BCCZ-RL7 online?
Use the Request a Quote form on this page to request the exact ADF4371BCCZ-RL7 part number, current availability, volume pricing, and estimated lead time. The form is the direct sourcing route for this product and helps prevent confusion with ADF4371 variants that use a different package, temperature grade, or ordering suffix. Specify reel packaging and your required production quantity when requesting the quotation.
What is the lead time and stock status for ADF4371BCCZ-RL7?
Current stock and lead time for ADF4371BCCZ-RL7 should be confirmed through the Request a Quote form on this page. The component is an active catalog item with a 32 GHz maximum generated frequency and a 48-lead TFLGA exposed-pad package, but production schedules and inventory can change. Include your required quantity, target date, and approved supplier status in the request.

بيانات مرجعية هندسية لـ ADF4371BCCZ-RL7 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADF4371BCCZ-RL7 when the design requires a compact wideband PLL/VCO covering 62.5 MHz to 32 GHz and needs the reel-packed ordering configuration. Its four outputs, integer-N mode, fractional-N mode, and external-loop-filter architecture suit programmable test equipment, radar modules, and wideband RF instruments. ADF4371BCCZ is the closest same-device option when the non-RL7 supply configuration is acceptable, while preserving the same electrical role and 48-TFLGA exposed-pad footprint. ADF4351-family devices belong in designs whose required output frequencies are below the ADF4371 range, but they are not substitutes for this 32 GHz-capable synthesizer. Before procurement, verify temperature grade, package, exposed-pad implementation, reference requirements, and assembly supply format.

المقارنة مع البدائل

المعامل هذا المنتج ADF4371BCCZ
Package 48-TFLGA Exposed Pad 48-TFLGA Exposed Pad
Brand Analog Devices Analog Devices
Maximum Generated Frequency 32 GHz 32 GHz
Minimum Generated Frequency 62.5 MHz 62.5 MHz
Number of Outputs 4 outputs 4 outputs
Synthesis Modes Integer-N and fractional-N Integer-N and fractional-N
Integrated VCO Yes Yes
Loop Filter External External
Reference Requirement External reference frequency External reference frequency
Ordering Configuration RL7 tape-and-reel configuration Non-RL7 ordering configuration

أبرز الفروقات

  • Wide integrated tuning range (مقابلADF4351BCPZ-RL7)
  • Four integrated synthesizer outputs (مقابلADF4351BCPZ-RL7)
  • Dual integer-N and fractional-N operation (مقابلADF4371BCCZ)

ملاحظات التصميم

Implement the 48-lead TFLGA footprint from the package drawing in the Analog Devices ADF4371 datasheet, including the exposed pad and its via pattern. Provide short, low-inductance connections from the power pins to the decoupling network, and place the capacitors where the manufacturer layout shows them. Keep the exposed-pad and via region clear of sensitive reference routes, and preserve continuous ground return paths beneath the device.

Route the reference, feedback, and RF outputs as controlled-impedance transmission lines appropriate to the board stack-up. The reference signal is directly involved in phase-noise and spur performance, so minimize discontinuities and keep it away from the VCO control and switching nodes. Preserve symmetry where practical and follow the datasheet's RF and grounding recommendations rather than treating the device as a low-speed digital component.

Do not assume that every ADF4371 ordering suffix is a drop-in choice without checking temperature grade, supply configuration, and exposed-pad requirements. Similarly, a device with a related VCO frequency range is not automatically pin-compatible because reference inputs, divider ranges, output logic, and register functions may differ. Verify the complete pin-description table, application circuit, and register map before releasing a substitute into production.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance status must be confirmed from the manufacturer product documentation for the exact ordering suffix.

تم التحقق من البيانات في: 2026-11-20 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ADF4371BCCZ-RL7 datasheet ADF4371BCCZ-RL7 specifications ADF4371BCCZ-RL7 pinout ADF4371BCCZ-RL7 datasheet pdf ADF4371 32 GHz synthesizer ADF4371 fractional N PLL ADF4371 microwave VCO ADF4371BCCZ-RL7 equivalent ADF4371BCCZ-RL7 replacement ADF4371BCCZ-RL7 vs ADF4371BCCZ Analog Devices ADF4371BCCZ-RL7 ADF4371BCCZ-RL7 price ADF4371BCCZ-RL7 stock ADF4371 application circuit

المكونات والمصطلحات ذات الصلة

Analog Devices ADF4371BCCZ-RL7 ADF4371BCCZ ADF4351BCPZ-RL7 EVAL-ADF4371 EVAL-ADF4371SD2Z frequency synthesizer clock and timing IC phase-locked loop PLL voltage-controlled oscillator VCO integer-N synthesizer fractional-N synthesizer microwave oscillator 48-TFLGA TFLGA family surface-mount package exposed pad external loop filter external reference phase noise reference spur phased-array radar RF instrumentation
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر