ADF4371BCCZ-RL7 - 32 GHz Wideband PLL/VCO | Analog Devices
N.º de pieza: ADF4371BCCZ-RL7 ✓ ActivoADF4371BCCZ-RL7 Descripción general
A frequency synthesizer is an electronic timing component that generates a stable, programmable output signal from a reference frequency. This ADF4371 belongs to the broader hierarchy of clock and timing ICs, RF synthesizers, phase-locked loops, and microwave signal-chain components. Its wide tuning range makes it useful where multiple high-frequency carriers must be synthesized locally rather than generated by a separate oscillator chain.
The headline capabilities include a maximum generated frequency of 32 GHz, a minimum generated frequency of 62.5 MHz, four outputs, and support for both integer-N and fractional-N synthesis. The 48-TFLGA exposed-pad package is intended for compact RF modules and high-density microwave assemblies. Compared with a discrete VCO and divider arrangement, the integrated synthesizer centralizes frequency generation, phase detection, feedback, and programmable output management.
According to the Analog Devices ADF4371 datasheet, the architecture uses an external reference and external loop filter to implement the phase-locked loop. The external filter permits engineering control over loop bandwidth, phase-noise behavior, reference-spur suppression, and lock characteristics. Integer-N operation supports exact integer relationships between the reference and output, while fractional-N operation expands practical division ratios and output-planning flexibility.
Typical uses include microwave test equipment, phased-array radar, radio-frequency instrumentation, microwave synthesizers, and wideband communication modules. The four-output architecture can reduce the number of separate synthesis paths in multi-channel systems when the required frequencies and isolation are compatible with the device architecture.
PCB implementation requires careful treatment of the exposed pad, supply decoupling, reference routing, RF outputs, and the external loop-filter network. Follow the pin-description table and layout guidance in the manufacturer datasheet during schematic capture and PCB placement. The exposed-pad thermal path must be connected according to the package recommendation to avoid localized heating.
This page combines the manufacturer specifications, package details, application guidance, practical design notes, and verified sourcing information for engineers evaluating the ADF4371BCCZ-RL7 as a wideband microwave PLL/VCO building block.
Alternativas directas para ADF4371BCCZ-RL7 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ADF4371BCCZ-RL7 (mismo factor de forma y huella) — difiere en Package, Product Type.
ADF4371BCCZ
✅ Sustitución directaConsulte el precio
Ver hoja de datos →ADF4371BCCZ-RL7 Especificaciones
| Product Type | Integer-N and fractional-N RF frequency synthesizer with integrated VCO |
| Minimum Generated Frequency | 62.5 MHz |
| Maximum Generated Frequency | 32 GHz |
| Output Count | 4 outputs |
| Synthesis Modes | Integer-N and fractional-N |
| Reference Input | External reference frequency |
| Loop Filter | External |
| Integrated VCO | Yes |
| VCO Frequency Range | 62.5 MHz to 32 GHz |
| Encapsulado | 48-lead TFLGA with exposed pad |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de ADF4371BCCZ-RL7 48-lead tflga with exposed pad
Configuración de pines para ADF4371BCCZ-RL7 (encapsulado 48-lead tflga with exposed pad). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para ADF4371BCCZ-RL7.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ADF4371BCCZ-RL7 es adecuado para 6 aplicacións: Microwave Test Equipment, Phased-Array Radar, Wideband Communication Modules, RF Instrumentation, Frequency-Selective Radar and EW, RF Signal Generators.
Microwave Test Equipment
The ADF4371BCCZ-RL7 fits precision microwave source architectures that require programmable local oscillator generation across a broad frequency range. Its integrated VCO supports generation from 62.5 MHz to 32 GHz, avoiding a separate microwave oscillator and divider chain. The four outputs can support modulation, reference, or multi-channel measurement functions when their routing and isolation requirements are satisfied. Use an external reference and tuned loop filter to establish the required phase-noise and spur performance.
Recomendado
Phased-Array Radar
The ADF4371BCCZ-RL7 is suitable for phased-array radar modules requiring local programmable frequency generation up to 32 GHz. Fractional-N synthesis provides finer output-frequency planning than integer-N ratios alone, while the four outputs can simplify multi-function signal distribution. System design must address reference phase noise, channel calibration, output isolation, and loop-filter bandwidth. A stable reference and carefully routed feedback path are essential for repeatable coherent operation.
Recomendado
Wideband Communication Modules
The ADF4371BCCZ-RL7 supports wideband communication modules that need multiple programmable microwave frequencies from a compact synthesizer. Its 62.5 MHz-to-32 GHz range covers a substantial portion of microwave and millimeter-wave equipment bands, while four outputs can reduce the number of discrete synthesis functions. The external loop filter must be tuned for the desired reference-spur suppression and lock time. RF layout also needs controlled impedance and short return paths.
Recomendado
RF Instrumentation
The ADF4371BCCZ-RL7 is appropriate for RF instrumentation requiring a compact, programmable signal source with outputs extending to 32 GHz. Integer-N operation is useful for exact reference-to-output ratios, while fractional-N mode gives additional flexibility when an integer ratio cannot meet the requested frequency plan. Four outputs can simplify sharing within an instrument when their individual frequency and isolation requirements are met. Designers should characterize phase noise, spurs, and lock behavior for each loop-filter configuration.
Recomendado
Frequency-Selective Radar and EW
The ADF4371BCCZ-RL7 can serve as the programmable RF core in frequency-selective radar, electronic-warfare, and signal-analysis modules that require rapid selection across microwave frequencies. Its maximum generated frequency of 32 GHz supports high-band RF generation, while integer-N and fractional-N modes offer different planning precision. A low-noise reference and optimized external loop filter directly influence close-in phase noise. Hardware engineers must also verify output power, spur levels, settling behavior, and channel isolation against the system specification.
Recomendado
RF Signal Generators
The ADF4371BCCZ-RL7 fits a local oscillator or RF signal-generator design requiring programmable output from 62.5 MHz to 32 GHz. Integrating the VCO and PLL functions reduces the component count compared with a discrete oscillator, divider, and phase-detector arrangement. Four outputs can serve separate modulation or reference paths when their routing supports the intended use. To obtain usable phase noise and reference spurs, tune the external loop filter and preserve a low-noise reference connection.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ADF4371BCCZ-RL7 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ADF4371BCCZ |
|---|---|---|
| Package | 48-TFLGA Exposed Pad | 48-TFLGA Exposed Pad |
| Brand | Analog Devices | Analog Devices |
| Maximum Generated Frequency | 32 GHz | 32 GHz |
| Minimum Generated Frequency | 62.5 MHz | 62.5 MHz |
| Number of Outputs | 4 outputs | 4 outputs |
| Synthesis Modes | Integer-N and fractional-N | Integer-N and fractional-N |
| Integrated VCO | Yes | Yes |
| Loop Filter | External | External |
| Reference Requirement | External reference frequency | External reference frequency |
| Ordering Configuration | RL7 tape-and-reel configuration | Non-RL7 ordering configuration |
Diferenciadores clave
- Wide integrated tuning range (frente a ADF4351BCPZ-RL7)
- Four integrated synthesizer outputs (frente a ADF4351BCPZ-RL7)
- Dual integer-N and fractional-N operation (frente a ADF4371BCCZ)
Notas de diseño
Implement the 48-lead TFLGA footprint from the package drawing in the Analog Devices ADF4371 datasheet, including the exposed pad and its via pattern. Provide short, low-inductance connections from the power pins to the decoupling network, and place the capacitors where the manufacturer layout shows them. Keep the exposed-pad and via region clear of sensitive reference routes, and preserve continuous ground return paths beneath the device.
Route the reference, feedback, and RF outputs as controlled-impedance transmission lines appropriate to the board stack-up. The reference signal is directly involved in phase-noise and spur performance, so minimize discontinuities and keep it away from the VCO control and switching nodes. Preserve symmetry where practical and follow the datasheet's RF and grounding recommendations rather than treating the device as a low-speed digital component.
Do not assume that every ADF4371 ordering suffix is a drop-in choice without checking temperature grade, supply configuration, and exposed-pad requirements. Similarly, a device with a related VCO frequency range is not automatically pin-compatible because reference inputs, divider ranges, output logic, and register functions may differ. Verify the complete pin-description table, application circuit, and register map before releasing a substitute into production.
Información de cumplimiento
Compliance status must be confirmed from the manufacturer product documentation for the exact ordering suffix.