ADM202EARUZ - 230 kbps 2-Channel RS-232 Interface | Analog Devices
MPN: ADM202EARUZ ✓ نشطADM202EARUZ نظرة عامة
An RS-232 transceiver is a semiconductor interface device that converts logic-level transmit and receive signals into balanced, voltage-amplified RS-232 signals. In the broader hierarchy, an RS-232 transceiver belongs to the interface IC family, then to communications transceivers, line drivers and receivers, and ultimately to discrete and integrated semiconductors. The ADM202E combines a transmitter section, receiver section, charge-pump voltage converter, and electrostatic-discharge protection in one compact device.
Key features include two transmit channels, two receive channels, operation from one 5 V supply, data rates up to 230 kbps, and approximately ±10 V charge-pump output levels. The manufacturer identifies the ADM202E family as compliant with the EIA/TIA-232-E and CCITT V.28 specifications. Its ±15 kV ESD protection makes it appropriate for ports connected through exposed cables, where electrostatic discharge and conducted transients are practical concerns. The 16-lead TSSOP occupies less board area than the corresponding PDIP and SOIC options.
The integrated charge-pump architecture eliminates the need for a separate bipolar RS-232 power supply. Four external 0.1 µF capacitors support the voltage-doubler and inverter functions, allowing the device to derive the required positive and negative output levels from 5 V. Fast driver slew rates help maintain valid signal transitions at higher data rates, while the integrated protection networks reduce stress on external interface components.
Typical applications include two-port RS-232 instrumentation links, industrial control consoles, test and measurement equipment, barcode and data-collection systems, remote terminals, and embedded communications boards. The device is especially useful when two full-duplex RS-232 channels are required and a compact 5 V-only implementation is preferred over a dual-supply discrete driver design.
PCB layout should keep the four 0.1 µF charge-pump capacitors close to their associated device pins, provide a low-impedance ground connection, and route the RS-232 interface traces away from sensitive analog and high-speed digital signals. The external connector remains the primary electrostatic-discharge entry point, so system-level cable protection and grounding should be evaluated alongside the device’s internal ±15 kV protection. This page consolidates the manufacturer specifications, drop-in compatibility information, sourcing guidance, and practical layout guidance for faster engineering evaluation.
بدائل مباشرة لـ ADM202EARUZ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ADM202EARUZ (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type, ESD Protection, Maximum Data Rate, Interface Standard.
ADM202EARU
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADM3202ARUZ
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX202EESE+
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX232EESE+
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX202ECSE+G068
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADM202EARUZ المواصفات
| Product Type | 2-channel RS-232 line driver/receiver transceiver |
| Number of Transmit Channels | 2 channels |
| Number of Receive Channels | 2 channels |
| جهد التغذية | 5 V |
| Maximum Data Rate | 230 kbps |
| Charge-Pump Output Levels | Approximately ±10 V |
| Charge-Pump Capacitors | 4 external capacitors at 0.1 µF each |
| ESD Protection | ±15 kV |
| RS-232 Compliance | Meets or exceeds EIA/TIA-232-E |
| V.28 Compliance | Meets or exceeds CCITT V.28 |
| العلبة | 16-lead TSSOP |
| نوع التركيب | Surface mount |
| Supply Configuration | Single +5 V supply |
| Output Driver | RS-232 line driver |
| Input Receiver | RS-232 line receiver |
| حالة RoHS | Compliant |
| REACH Status | Compliant |
دليل تكوين أطراف ADM202EARUZ 16-lead tssop
تكوين الأطراف لـ ADM202EARUZ (حزمة 16-lead tssop). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADM202EARUZ.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ADM202EARUZ مناسب لـ 6 التطبيقs: Industrial Instrument Control, Test and Measurement Console, Data Collection Terminal, Remote Communications Module, Embedded Control Board, Serial Port Expansion.
Industrial Instrument Control
The ADM202EARUZ fits two-port industrial instrument control because it combines two transmitters, two receivers, 230 kbps operation, and single 5 V operation in a 16-lead TSSOP. Its ±15 kV ESD protection improves resilience at externally accessible equipment ports. The interface is placed between a controller and two RS-232 peripheral buses, while the four 0.1 µF charge-pump capacitors are positioned close to the device. This arrangement reduces board area compared with dual-supply discrete driver solutions, although cable grounding and connector-level protection must still be designed for the installation environment.
موصى به
Test and Measurement Console
The ADM202EARUZ is suitable for a test console that must communicate with two RS-232 instruments while operating from a 5 V backplane. Two independent driver and receiver channels support simultaneous equipment links, and the 230 kbps capability provides useful margin for measurement data and control commands. The device can sit close to the console’s serial connector, with short protected traces and a continuous ground plane. Its fast driver transitions support signal integrity at higher supported rates, while compact TSSOP packaging preserves board area for analog and display circuitry.
موصى به
Data Collection Terminal
The ADM202EARUZ supports data-collection terminals that exchange commands and records through two RS-232 links. The 5 V-only architecture simplifies system power design, while the 230 kbps rate is appropriate for many barcode scanners, readers, and local data-collection equipment. Two channels can serve a primary peripheral and a secondary instrument without duplicating the complete transceiver circuit. External 0.1 µF charge-pump capacitors remain mandatory, and connector cables should be kept away from high-current switching nodes to reduce electromagnetic pickup on the unshielded RS-232 interface.
موصى به
Remote Communications Module
The ADM202EARUZ can provide the physical RS-232 interface for a remote communications or supervisory module with a 5 V processor rail. Its two-channel arrangement supports independent transmit and receive paths to a modem or supervisory controller, while the 16-lead TSSOP package limits board footprint. The integrated charge pump produces approximately ±10 V levels, so the module does not need a separate negative RS-232 supply. ESD protection is useful where the interface passes through a panel connector, although long cable runs still require careful grounding, surge assessment, and separation from sensitive analog circuitry.
موصى به
Embedded Control Board
The ADM202EARUZ is appropriate for an embedded control board needing legacy RS-232 connectivity alongside modern digital circuitry. It offers two channels from a single 5 V rail and reaches 230 kbps for command and status traffic. Placing the TSSOP device near the connector can shorten interface traces, but the charge-pump loop should remain compact and return currents should use a stable ground reference. Compared with a slower transceiver, this part supports faster transfer rates, while compared with a discrete bipolar implementation it reduces external circuitry and board area.
موصى به
Serial Port Expansion
The ADM202EARUZ can expand a single-port controller into two RS-232 channels using a 5 V-only interface. Two transmitters and two receivers make it convenient for connecting a service computer to a peripheral while another channel remains available for configuration or diagnostic equipment. The 230 kbps rate accommodates many legacy control protocols, and ±15 kV ESD protection adds robustness at exposed ports. A design should compare the exact legacy protocol timing against the selected replacement’s rating, because RS-232 compliance alone does not guarantee compatibility with every proprietary baud-rate or framing convention.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ADM202EARUZ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ADM202EARU | ADM3202ARUZ | MAX202EESE | MAX232EESE | MAX202ECSE |
|---|---|---|---|---|---|---|
| Package | 16-lead TSSOP | 16-lead TSSOP | 16-lead TSSOP | 16-lead TSSOP | 16-lead TSSOP | 16-lead TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
أبرز الفروقات
- Higher supported data rate than the documented MAX202E socket family (مقابلMAX202EESE)
- Documented pin-compatible upgrade path from legacy RS-232 sockets (مقابلMAX232EESE)
- Two-channel 230 kbps operation in a compact TSSOP package (مقابلADM3202ARUZ)
ملاحظات التصميم
Place all four 0.1 µF charge-pump capacitors close to the ADM202EARUZ pins and follow the Analog Devices recommended capacitor connections exactly. Keep each charge-pump loop compact because its switching current returns through nearby supply and ground paths. Use a continuous ground plane and place the device close to the connector-side protection components to minimize susceptibility to externally coupled noise.
Do not treat any RS-232 device as automatically replaceable based only on channel count and package. Verify every numbered pin, the charge-pump capacitor values, supply requirements, driver and receiver logic levels, and the required data rate against the manufacturer datasheet. ADM202EARU is electrically and mechanically close but represents a different ordering code; MAX202E and MAX232E suffixes must also be checked for package and temperature-grade differences.
RS-232 is an unbalanced interface, so reduce EMI by keeping the interface connector and transceiver away from switching power stages, high-speed clocks, and high-current return paths. Use the shortest practical routed traces, provide a low-impedance chassis or signal-ground connection, and consider an external protection device at the connector when the cable environment includes severe ESD or surge exposure. Internal ±15 kV protection does not replace connector-level design.
معلومات الامتثال
RoHS and REACH compliance are identified in product-comparison information for ADM202EARUZ. The device is not an automotive-qualified component, and no separate lead-free, halogen-free, or conflict-minerals declaration was established.