Analog Devices

ADM202EARUZ - 230 kbps 2-Channel RS-232 Interface | Analog Devices

Référence : ADM202EARUZ ✓ Actif
5 V Vdss 16-lead TSSOP Package
MOQ : 1 |

ADM202EARUZ Présentation

Analog Devices ADM202EARUZ is a 2-channel RS-232 line driver and receiver pair designed to operate from a single 5 V supply, with 230 kbps data-rate capability and 16-lead TSSOP packaging. It generates approximately ±10 V RS-232 output levels using an on-chip charge-pump converter and four external 0.1 µF capacitors. The device meets or exceeds the EIA/TIA-232-E and CCITT V.28 requirements and is positioned for industrial, instrumentation, communications, and data-processing systems requiring two protected RS-232 ports.

An RS-232 transceiver is a semiconductor interface device that converts logic-level transmit and receive signals into balanced, voltage-amplified RS-232 signals. In the broader hierarchy, an RS-232 transceiver belongs to the interface IC family, then to communications transceivers, line drivers and receivers, and ultimately to discrete and integrated semiconductors. The ADM202E combines a transmitter section, receiver section, charge-pump voltage converter, and electrostatic-discharge protection in one compact device.

Key features include two transmit channels, two receive channels, operation from one 5 V supply, data rates up to 230 kbps, and approximately ±10 V charge-pump output levels. The manufacturer identifies the ADM202E family as compliant with the EIA/TIA-232-E and CCITT V.28 specifications. Its ±15 kV ESD protection makes it appropriate for ports connected through exposed cables, where electrostatic discharge and conducted transients are practical concerns. The 16-lead TSSOP occupies less board area than the corresponding PDIP and SOIC options.

The integrated charge-pump architecture eliminates the need for a separate bipolar RS-232 power supply. Four external 0.1 µF capacitors support the voltage-doubler and inverter functions, allowing the device to derive the required positive and negative output levels from 5 V. Fast driver slew rates help maintain valid signal transitions at higher data rates, while the integrated protection networks reduce stress on external interface components.

Typical applications include two-port RS-232 instrumentation links, industrial control consoles, test and measurement equipment, barcode and data-collection systems, remote terminals, and embedded communications boards. The device is especially useful when two full-duplex RS-232 channels are required and a compact 5 V-only implementation is preferred over a dual-supply discrete driver design.

PCB layout should keep the four 0.1 µF charge-pump capacitors close to their associated device pins, provide a low-impedance ground connection, and route the RS-232 interface traces away from sensitive analog and high-speed digital signals. The external connector remains the primary electrostatic-discharge entry point, so system-level cable protection and grounding should be evaluated alongside the device’s internal ±15 kV protection. This page consolidates the manufacturer specifications, drop-in compatibility information, sourcing guidance, and practical layout guidance for faster engineering evaluation.

Alternatives de remplacement direct pour ADM202EARUZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ADM202EARUZ (même facteur de forme et même empreinte) — différant par Package, Product Type, ESD Protection, Maximum Data Rate, Interface Standard.

Analog Devices
Package: 16-pin TSSOP
Product Type: 2-channel full-duplex RS-232 transceiver
Interface Standard: TIA/EIA-232-E and V.28
Comparer avec ADM202EARUZ →
Analog Devices
Package: 16-TSSOP, 4.40 mm width
Maximum Data Rate: 460 kbps
Interface Standard: RS-232/EIA-232E/CCITT V.28
Comparer avec ADM202EARUZ →
Analog Devices
Package: 16-pin SOIC, 0.154 inch body width, 3.90 mm body width
ESD Protection: 15 kV
Comparer avec ADM202EARUZ →
Analog Devices
Package: 16-pin SOIC
Product Type: RS-232 line transceiver
ESD Protection: ±15 kV HBM
Comparer avec ADM202EARUZ →
Analog Devices
Package: 16-pin narrow SOIC
Product Type: Dual RS-232 transceiver with integrated charge pump
ESD Protection: 15 kV
Comparer avec ADM202EARUZ →

ADM202EARU

✅ Remplacement direct
Analog Devices
📦 16-lead TSSOP
2-channel full-duplex RS-232 transceiver · 2 channels · 2 channels · 5 V · ±10 V · as small as 0.1 µF · ±15 kV · TIA/EIA-232-E and V.28

Contactez-nous pour le prix

Voir la fiche technique →

ADM3202ARUZ

✅ Remplacement direct
Analog Devices
📦 16-lead TSSOP
2/2 (2 drivers and 2 receivers) · RS-232/EIA-232E/CCITT V.28 · 460 kbps · 3 V to 5.5 V · 3.3 V · 2 · 2 · 0.1 µF each, 4 capacitors

Contactez-nous pour le prix

Voir la fiche technique →

MAX202EESE+

✅ Remplacement direct
Analog Devices
📦 16-lead TSSOP
RS-232 line transceiver · 2 · 2 · +5 V · 120 kbps · ±15 kV HBM · EIA/TIA-232E and CCITT V.28 · 16-pin SOIC

Contactez-nous pour le prix

Voir la fiche technique →

MAX232EESE+

✅ Remplacement direct
Analog Devices
📦 16-lead TSSOP
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

Contactez-nous pour le prix

Voir la fiche technique →

MAX202ECSE+G068

✅ Remplacement direct
Analog Devices
📦 16-lead TSSOP
2 · 2 · 2/2 full-duplex RS-232 transceiver · RS-232 and V.28 · 4.5 V to 5.5 V · 15 kV · 16-pin SOIC, 0.154 inch body width, 3.90 mm body width · SOIC-16

Contactez-nous pour le prix

Voir la fiche technique →

ADM202EARUZ Spécifications

Product Type 2-channel RS-232 line driver/receiver transceiver
Number of Transmit Channels 2 channels
Number of Receive Channels 2 channels
Tension d'alimentation 5 V
Maximum Data Rate 230 kbps
Charge-Pump Output Levels Approximately ±10 V
Charge-Pump Capacitors 4 external capacitors at 0.1 µF each
ESD Protection ±15 kV
RS-232 Compliance Meets or exceeds EIA/TIA-232-E
V.28 Compliance Meets or exceeds CCITT V.28
Boîtier 16-lead TSSOP
Type de montage Surface mount
Supply Configuration Single +5 V supply
Output Driver RS-232 line driver
Input Receiver RS-232 line receiver
Statut RoHS Compliant
REACH Status Compliant

Guide de configuration des broches du ADM202EARUZ 16-lead tssop

Configuration des broches du ADM202EARUZ (boîtier 16-lead tssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-lead tssop pour le ADM202EARUZ

Aucune donnée de brochage détaillée disponible pour ADM202EARUZ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADM202EARUZ convient pour 6 applications: Industrial Instrument Control, Test and Measurement Console, Data Collection Terminal, Remote Communications Module, Embedded Control Board, Serial Port Expansion.

🏭

Industrial Instrument Control

The ADM202EARUZ fits two-port industrial instrument control because it combines two transmitters, two receivers, 230 kbps operation, and single 5 V operation in a 16-lead TSSOP. Its ±15 kV ESD protection improves resilience at externally accessible equipment ports. The interface is placed between a controller and two RS-232 peripheral buses, while the four 0.1 µF charge-pump capacitors are positioned close to the device. This arrangement reduces board area compared with dual-supply discrete driver solutions, although cable grounding and connector-level protection must still be designed for the installation environment.

🔧

Test and Measurement Console

The ADM202EARUZ is suitable for a test console that must communicate with two RS-232 instruments while operating from a 5 V backplane. Two independent driver and receiver channels support simultaneous equipment links, and the 230 kbps capability provides useful margin for measurement data and control commands. The device can sit close to the console’s serial connector, with short protected traces and a continuous ground plane. Its fast driver transitions support signal integrity at higher supported rates, while compact TSSOP packaging preserves board area for analog and display circuitry.

📱

Data Collection Terminal

The ADM202EARUZ supports data-collection terminals that exchange commands and records through two RS-232 links. The 5 V-only architecture simplifies system power design, while the 230 kbps rate is appropriate for many barcode scanners, readers, and local data-collection equipment. Two channels can serve a primary peripheral and a secondary instrument without duplicating the complete transceiver circuit. External 0.1 µF charge-pump capacitors remain mandatory, and connector cables should be kept away from high-current switching nodes to reduce electromagnetic pickup on the unshielded RS-232 interface.

🌐

Remote Communications Module

The ADM202EARUZ can provide the physical RS-232 interface for a remote communications or supervisory module with a 5 V processor rail. Its two-channel arrangement supports independent transmit and receive paths to a modem or supervisory controller, while the 16-lead TSSOP package limits board footprint. The integrated charge pump produces approximately ±10 V levels, so the module does not need a separate negative RS-232 supply. ESD protection is useful where the interface passes through a panel connector, although long cable runs still require careful grounding, surge assessment, and separation from sensitive analog circuitry.

🖥️

Embedded Control Board

The ADM202EARUZ is appropriate for an embedded control board needing legacy RS-232 connectivity alongside modern digital circuitry. It offers two channels from a single 5 V rail and reaches 230 kbps for command and status traffic. Placing the TSSOP device near the connector can shorten interface traces, but the charge-pump loop should remain compact and return currents should use a stable ground reference. Compared with a slower transceiver, this part supports faster transfer rates, while compared with a discrete bipolar implementation it reduces external circuitry and board area.

🔌

Serial Port Expansion

The ADM202EARUZ can expand a single-port controller into two RS-232 channels using a 5 V-only interface. Two transmitters and two receivers make it convenient for connecting a service computer to a peripheral while another channel remains available for configuration or diagnostic equipment. The 230 kbps rate accommodates many legacy control protocols, and ±15 kV ESD protection adds robustness at exposed ports. A design should compare the exact legacy protocol timing against the selected replacement’s rating, because RS-232 compliance alone does not guarantee compatibility with every proprietary baud-rate or framing convention.

What is the ADM202EARUZ?
The ADM202EARUZ is a 2-channel RS-232 transceiver from Analog Devices with two transmitters, two receivers, a 230 kbps maximum data rate, and a 16-lead TSSOP package. According to the Analog Devices ADM202E product information, it operates from a single 5 V supply and generates approximately ±10 V levels through an integrated charge-pump circuit. It is designed for industrial and instrumentation interfaces requiring compliant RS-232 operation.
What is the operating voltage of ADM202EARUZ?
The ADM202EARUZ operates from a single 5 V supply. The Analog Devices ADM202E documentation identifies four external 0.1 µF charge-pump capacitors and an on-chip converter that generates approximately ±10 V RS-232 output levels from the 5 V supply. This allows the interface to use bipolar-looking RS-232 signals without requiring a separate negative supply in the equipment.
Where can I download the ADM202EARUZ datasheet PDF?
The official ADM202EARUZ documentation is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADM2023_1181A.pdf. The manufacturer datasheet covers the ADM202E and ADM1181A families and includes the pin-compatible socket relationship for ADM202, ADM232L, MAX202E, and MAX232E designs. Use the pin-description table in that document when assigning PCB tracks.
Where is the ADM202EARUZ pinout located?
The ADM202EARUZ pinout is located in the pin-description table of the official Analog Devices ADM2023/ADM1181A datasheet. The part uses a 16-lead TSSOP package with transmit outputs, receive inputs, supply, ground, and charge-pump capacitor connections. Use the numbered package drawing and pin-description table together because connector-side signal names can differ from logic-side receiver and driver names.
How fast is the ADM202EARUZ RS-232 transceiver?
The ADM202EARUZ supports data rates up to 230 kbps. According to the Analog Devices ADM202E product information, both the ADM202E and ADM1181A conform to the EIA/TIA-232-E and CCITT V.28 specifications and operate at data rates up to 230 kbps. Its fast driver slew rates support cleaner signal transitions when the full specified data rate is used.
Does the ADM202EARUZ need external charge-pump capacitors?
Yes, the ADM202EARUZ requires four external 0.1 µF charge-pump capacitors. The Analog Devices ADM202E documentation specifies these capacitors for the voltage-doubler and inverter functions. Place each capacitor close to the corresponding device pin and follow the manufacturer layout recommendations to minimize switching-loop area and preserve stable charge-pump operation.
What ESD protection does the ADM202EARUZ provide?
The ADM202EARUZ provides ±15 kV ESD protection for its RS-232 interface lines. Analog Devices describes the ADM202E family as EMI/EMC-compliant and suitable for harsh electrical environments. Internal protection reduces stress on the driver and receiver circuits, but cable routing, connector grounding, and system-level surge design remain important for reliable field operation.
Is ADM202EARUZ a drop-in replacement for MAX202E or MAX232E?
The ADM202EARUZ is a pin-compatible upgrade for existing ADM202, ADM232L, MAX202E, and MAX232E sockets when the corresponding package and pin configuration are used. The official Analog Devices datasheet explicitly identifies that socket compatibility. Verify the selected suffix, package lead width, temperature grade, and exposed-charge-pump capacitor requirements before treating any replacement as production-ready.
What can replace the ADM202EARUZ?
The closest documented replacements are the pin-compatible ADM202, ADM232L, MAX202E, and MAX232E devices identified by Analog Devices. A valid replacement must preserve the 16-lead pin arrangement, 5 V operation, 0.1 µF charge-pump capacitor configuration, and required data-rate rating. Do not substitute a device merely because it is also labeled RS-232; verify the exact socket schematic and pin count.
Is ADM202EARUZ suitable for industrial equipment?
The ADM202EARUZ is suitable for industrial equipment requiring two RS-232 channels and single 5 V operation. Its ±15 kV ESD protection, fast driver transitions, and EIA/TIA-232-E and CCITT V.28 compatibility address common port-environment requirements. For a finished industrial product, verify the exact operating-temperature grade and applicable EMC test requirements for the installation environment.
ADM202EARUZ vs ADM3202ARUZ: which is better for a 230 kbps link?
The ADM202EARUZ is the closer choice for a design specified around the ADM202E socket and 230 kbps operation. The available comparison identifies ADM3202ARUZ as a 460 kbps, 16-TSSOP RS-232 device, so it offers a higher headline data rate but is not established by the cited comparison as a pin-compatible replacement. Compare charge-pump topology, capacitor values, supply requirements, and every socket pin before substitution.
When should I choose ADM202EARUZ over a lower-speed RS-232 transceiver?
Choose the ADM202EARUZ when the interface requires two full RS-232 channels, operation up to 230 kbps, and a compact 16-lead TSSOP implementation from one 5 V rail. It is preferable when the board already uses the documented ADM202, ADM232L, MAX202E, or MAX232E socket arrangement. A lower-speed device may suffice for lower-bandwidth links, but changing it can alter capacitance, timing, protection, or layout requirements.
Where to buy ADM202EARUZ online?
Use the Request a Quote form on this page to request ADM202EARUZ availability, current lead time, and a unit quotation. The form is the appropriate channel because inventory and commercial terms can change without notice. Confirm the exact ADM202EARUZ suffix, 16-lead TSSOP package, delivery format, and quantity before authorizing procurement.
What is the price of ADM202EARUZ?
Use the Request a Quote form on this page for the current ADM202EARUZ price and quantity schedule. The structured quote can reflect the requested order quantity, packaging, and supply conditions at the time of review. Buyers should also request the current lead time and stock status rather than relying on an older catalog price for this exact MPN.
What is the lead time and stock status for ADM202EARUZ?
Request the current ADM202EARUZ lead time, minimum order quantity, and stock status through the Request a Quote form on this page. The manufacturer family is active, but exact inventory and scheduling must be confirmed for the complete ordering code. Include the required quantity and reel or cut-tape preference when submitting the request.
What are the key specifications of ADM202EARUZ that engineers should know?
The ADM202EARUZ combines two RS-232 transmitters, two receivers, a 5 V supply requirement, 230 kbps operation, ±10 V charge-pump outputs, and ±15 kV ESD protection in a 16-lead TSSOP. According to the Analog Devices ADM202E documentation, the device meets or exceeds EIA/TIA-232-E and CCITT V.28 requirements. Four external 0.1 µF capacitors are required for the charge-pump functions.
Is the ADM202EARUZ compliant with RoHS and REACH?
The ADM202EARUZ is identified as RoHS compliant and REACH compliant for the relevant material and substance declarations. These declarations apply to the ordered device and its packaging, not to every custom assembly containing it. Request the current manufacturer material declaration for the exact product if compliance documentation is required as part of a formal procurement process.

Données de référence d'ingénierie pour ADM202EARUZ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ADM202EARUZ for a 16-lead TSSOP design that needs two RS-232 channels, a single 5 V supply, 230 kbps operation, and ±15 kV ESD protection. The official Analog Devices documentation identifies it as a pin-compatible upgrade for ADM202, ADM232L, MAX202E, and MAX232E sockets, making it appropriate for controlled PCB reuse. Select ADM202EARU when the same electrical configuration is required under a different ordering or packaging code. Consider ADM3202ARUZ when the required link rate is closer to 460 kbps and its exact capacitor and pin requirements match the redesigned board. MAX202EESE, MAX232EESE, and MAX202ECSE can support legacy socket designs, but their suffixes, temperature grades, charge-pump networks, and electrical limits must be checked against the target schematic before release.

Comparaison avec les alternatives

Paramètre Ce produit ADM202EARU ADM3202ARUZ MAX202EESE MAX232EESE MAX202ECSE
Package 16-lead TSSOP 16-lead TSSOP 16-lead TSSOP 16-lead TSSOP 16-lead TSSOP 16-lead TSSOP
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated Maxim Integrated Maxim Integrated
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V

Principaux différenciateurs

  • Higher supported data rate than the documented MAX202E socket family (vs MAX202EESE)
  • Documented pin-compatible upgrade path from legacy RS-232 sockets (vs MAX232EESE)
  • Two-channel 230 kbps operation in a compact TSSOP package (vs ADM3202ARUZ)

Notes de conception

Place all four 0.1 µF charge-pump capacitors close to the ADM202EARUZ pins and follow the Analog Devices recommended capacitor connections exactly. Keep each charge-pump loop compact because its switching current returns through nearby supply and ground paths. Use a continuous ground plane and place the device close to the connector-side protection components to minimize susceptibility to externally coupled noise.

Do not treat any RS-232 device as automatically replaceable based only on channel count and package. Verify every numbered pin, the charge-pump capacitor values, supply requirements, driver and receiver logic levels, and the required data rate against the manufacturer datasheet. ADM202EARU is electrically and mechanically close but represents a different ordering code; MAX202E and MAX232E suffixes must also be checked for package and temperature-grade differences.

RS-232 is an unbalanced interface, so reduce EMI by keeping the interface connector and transceiver away from switching power stages, high-speed clocks, and high-current return paths. Use the shortest practical routed traces, provide a low-impedance chassis or signal-ground connection, and consider an external protection device at the connector when the cable environment includes severe ESD or surge exposure. Internal ±15 kV protection does not replace connector-level design.

Informations de conformité

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS and REACH compliance are identified in product-comparison information for ADM202EARUZ. The device is not an automotive-qualified component, and no separate lead-free, halogen-free, or conflict-minerals declaration was established.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

adm202earuz reel ADM202EARUZ datasheet ADM202EARUZ datasheet pdf ADM202EARUZ pinout ADM202EARUZ replacement ADM202EARUZ equivalent ADM202EARUZ cross reference ADM202EARUZ vs ADM3202ARUZ ADM202EARUZ 230 kbps ADM202EARUZ 16 TSSOP Analog Devices ADM202EARUZ ADM202EARUZ RS-232 application circuit ADM202EARUZ price ADM202EARUZ stock

Composants & termes associés

Analog Devices ADM202EARUZ ADM202E ADM202EARU ADM3202ARUZ MAX202EESE MAX232EESE MAX202ECSE RS-232 EIA/TIA-232-E CCITT V.28 RS-232 transceiver line driver line receiver interface IC communications transceiver semiconductor charge-pump converter 5 V power supply 230 kbps ±10 V ±15 kV ESD protection 16-lead TSSOP TSSOP package family surface-mount device
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ