Analog Devices

ADM202EARW - 230 kbps Dual RS-232 | Analog Devices

MPN: ADM202EARW ✓ نشط
5 V Vdss 16-lead wide SOIC Package EN 55022 Memory
الحد الأدنى للطلب: 1 |

ADM202EARW نظرة عامة

Analog Devices ADM202EARW is a dual-channel RS-232 line driver and receiver interface operating from a single 5 V supply, with data rates up to 230 kbps in a 16-lead SOIC package. Its on-chip charge-pump circuitry generates approximately +10 V and -10 V RS-232 output levels using external 0.1 uF capacitors. The device meets or exceeds TIA/EIA-232-E and V.28 requirements.

An RS-232 transceiver is an interface IC that converts low-voltage digital logic signals into differential bipolar voltage levels for serial data transmission, while converting received bipolar levels back into logic-compatible signals. The ADM202EARW combines two transmit channels and two receive channels in one package, making it a compact interface between a host controller and an RS-232 data link.

Key features include a single 5 V supply, a maximum data rate of 230 kbps, and approximately +/-10 V RS-232 output levels. The charge-pump design permits small 0.1 uF capacitors and eliminates the need for a separate negative supply. ESD protection is specified at 15 kV air-gap discharge, 15 kV human-body-model discharge, and 8 kV contact discharge. The device is also described as EMI/EMC compliant for use in electrically noisy equipment.

The internal architecture combines a charge-pump voltage converter, two line drivers, two receivers, and protection features in a single integrated circuit. Fast driver slew rates support reliable operation at data rates as high as 230 kbps. Because the transmitter generates bipolar RS-232 levels from one 5 V rail, system designers can use the same supply for logic and communications while simplifying the power-supply arrangement.

Typical applications include industrial serial-port equipment, data acquisition systems, test and measurement instruments, point-of-sale terminals, barcode scanners, and embedded systems that require short-distance RS-232 connectivity. It is particularly useful when two RS-232 ports share a limited board area but do not require galvanic isolation.

The four external charge-pump capacitors must be placed close to their associated pins, and unused receiver or driver inputs should be handled according to the manufacturer pin-description table. Decoupling and grounding practices also matter: keep the charge-pump return path compact, provide a low-impedance ground connection, and route the interface connector and logic circuitry to minimize noise coupling.

This page combines the manufacturer specifications, package and lifecycle information, cross-reference information, and practical integration guidance for engineers evaluating the ADM202EARW as a dual RS-232 interface solution.

بدائل مباشرة لـ ADM202EARW — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADM202EARW (نفس عامل الشكل والبصمة) — يختلف في Interface Standard, Package, Product Type.

Analog Devices
Interface Standard: TIA/EIA-232-E and CCITT V.28
Package: 16-pin SOIC
Product Type: 2-channel RS-232 line driver/receiver transceiver
قارن مع ADM202EARW →

ADM202ARW

✅ بديل مباشر
📦 16-lead wide SOIC
0 kbps data-rate difference and 0 V RS-232 output-amplitude difference versus the 230 kbps, approximately +/-10 V ADM202EARW; the original ADM202 does not have the same documented ADM202E ESD positioning

📋 بديل مرجعي (غير موجود في الكتالوج)

ADM202EARWZ

✅ بديل مباشر
Analog Devices
📦 16-lead wide SOIC
2-channel RS-232 line driver/receiver transceiver · 2 channels · 2 channels · 5 V · 4.5 V to 5.5 V · 230 kbps · Approximately ±10 V · 4 external capacitors at 0.1 µF

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX202EEWE

✅ بديل مباشر
📦 16-lead wide SOIC
Matches the documented 2-channel RS-232, 230 kbps-class, 5 V architecture and 0 kbps interface-rate difference; protection and shutdown details require verification

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX202EWE

✅ بديل مباشر
📦 16-lead wide SOIC
Matches the 2-driver/2-receiver RS-232 socket function with 0 kbps interface-rate difference; ESD, temperature, and shutdown comparisons remain package-specific

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX232EEWE

✅ بديل مباشر
📦 16-lead wide SOIC
Matches the 2-channel RS-232 interface and 0 kbps stated-rate difference; enable and shutdown behavior must be checked against the ADM202EARW application circuit

📋 بديل مرجعي (غير موجود في الكتالوج)

ADM202EARW المواصفات

Product Type Dual RS-232 line driver/receiver transceiver
Number of Driver Channels 2 channels
Number of Receiver Channels 2 channels
جهد التغذية 5 V
Maximum Data Rate 230 kbps
RS-232 Output Levels Approximately +10 V and -10 V
External Charge-Pump Capacitor 0.1 uF
Number of Charge-Pump Capacitors 4 capacitors
Interface Standard TIA/EIA-232-E and V.28
Air-Gap ESD Protection 15 kV
Human-Body-Model ESD Protection 15 kV
Contact Discharge ESD Protection 8 kV
Fast Transient Burst Immunity IEC 1000-4-4
Electromagnetic Emissions EN 55022
العلبة 16-lead wide SOIC
نوع التركيب Surface mount
Operating Supply Single 5 V supply
حالة RoHS Compliant

دليل تكوين أطراف ADM202EARW 16-lead wide soic

تكوين الأطراف لـ ADM202EARW (حزمة 16-lead wide soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-lead wide soic لـ ADM202EARW

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADM202EARW.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADM202EARW مناسب لـ 6 التطبيقs: Industrial Serial-Port Control, Data-Acquisition Equipment, Point-of-Sale Terminal Interface, Barcode and Card Reader, Test and Measurement Instrument, Embedded Serial Communication.

🏭

Industrial Serial-Port Control

The ADM202EARW fits industrial equipment that requires a compact two-port RS-232 interface for configuration, diagnostics, or service communications. Its single 5 V supply simplifies power design, while the on-chip charge pump produces approximately +10 V and -10 V without a separate negative rail. Two drivers and two receivers can support two serial links or provide transmit and receive paths on separate connectors. The 230 kbps maximum rate accommodates legacy supervisory protocols, while the documented 15 kV air-gap and 15 kV human-body-model ESD protection improves resilience to cable-borne transients in industrial environments.

📊

Data-Acquisition Equipment

The ADM202EARW is appropriate for laboratory and industrial data-acquisition systems that must communicate with older instruments through RS-232. Its two receive channels can accept commands or measurements from two instruments, while its two transmit channels can provide separate control paths. The 230 kbps data rate is suitable for many legacy instrument protocols, and the 16-lead wide SOIC keeps the interface compact without requiring a separate negative supply. Four 0.1 uF charge-pump capacitors provide the required bipolar drive from a single 5 V source.

🖥️

Point-of-Sale Terminal Interface

Point-of-sale terminals, receipt printers, scanners, and payment accessories often rely on RS-232 connectivity. The ADM202EARW provides two transmit and two receive channels in one 16-lead SOIC, allowing a controller to combine command and data paths without allocating multiple interface packages. Its single 5 V operation aligns with modern embedded logic rails, and the integrated charge pump removes the need for a negative voltage source. ESD protection is especially relevant when the interface reaches through an external connector and is exposed to user-contact transients.

🔧

Barcode and Card Reader

The ADM202EARW can serve as the host-side interface in barcode scanners, magnetic-card readers, and compact transaction terminals. These systems often need short, reliable serial links to a scanner or reader while keeping the PCB area limited. The 16-lead wide SOIC integrates two drivers and two receivers, while the 230 kbps rate is well above the throughput commonly required for character-oriented scanner traffic. Its 5 V-only operation simplifies the system power tree, and its documented ESD ratings help protect the interface from connector-borne discharge events.

📟

Test and Measurement Instrument

The ADM202EARW is useful in test and measurement instruments that expose a legacy RS-232 control port to a host computer. A single package can provide both transmit and receive channels for command exchange, reducing board-space requirements compared with separate driver and receiver ICs. The charge-pump architecture creates the required approximately +/-10 V levels from a single 5 V rail, while the 230 kbps maximum rate supports many legacy control protocols. Careful charge-pump capacitor placement and grounding are essential to minimize emissions in precision or shielded laboratory equipment.

🧩

Embedded Serial Communication

The ADM202EARW fits embedded controllers that must bridge modern logic to an RS-232 port for service consoles, legacy controllers, or equipment networks. Its 5 V supply requirement is compatible with 5 V embedded systems, and its integrated charge pump avoids external inverter circuitry. Two full driver and receiver channels provide flexible port allocation, while the 16-lead SOIC remains easy to assemble and inspect. The interface should be paired with proper connector grounding, cable shielding, and short charge-pump traces to preserve low EMI and reliable 230 kbps operation.

ملخص المنتجات الموصى بها

ADM202ARW Same-family RS-232 transceiver alternative يُستخدم في: Industrial Serial-Port Control, Barcode and Card Reader, Embedded Serial Communication MAX202EEWE Pin-compatible wide-SOIC interface alternative يُستخدم في: Industrial Serial-Port Control, Test and Measurement Instrument ADM202EAN Analog Devices يُستخدم في: Data-Acquisition Equipment ADM202EARWZ Analog Devices يُستخدم في: Data-Acquisition Equipment, Barcode and Card Reader MAX202EWE Wide-SOIC RS-232 cross-reference يُستخدم في: Point-of-Sale Terminal Interface, Test and Measurement Instrument MAX232EEWE Dual RS-232 interface alternative يُستخدم في: Point-of-Sale Terminal Interface, Embedded Serial Communication
What are the key specifications of ADM202EARW that engineers should know?
The ADM202EARW is a dual-channel RS-232 transceiver with two driver channels, two receiver channels, a single 5 V supply, and operation up to 230 kbps in a 16-lead wide SOIC package. According to the Analog Devices manufacturer datasheet, its charge-pump circuit generates approximately +10 V and -10 V using four external 0.1 uF capacitors. These characteristics make it suitable for compact, short-distance RS-232 links in industrial, test, and embedded equipment.
Where can I download the ADM202EARW datasheet PDF?
The official Analog Devices datasheet is available from the manufacturer at https://www.analog.com/media/en/technical-documentation/data-sheets/ADM2023_1181A.pdf. It describes the ADM202E family, including its single 5 V operation, 230 kbps maximum data rate, TIA/EIA-232-E and V.28 compliance, charge-pump circuit, and ESD ratings. The ADM202EARW product page at analog.com/en/products/adm202.html provides the corresponding ordering and product information.
Where can I find the ADM202EARW pinout?
Use the pin-description table in the official Analog Devices datasheet to assign PCB nets and verify the 16-lead SOIC orientation. The ADM202EARW pin names and exact numbering were not available on the product-page excerpts, so this page does not reproduce a potentially incorrect pin list. The package is a 16-lead wide SOIC, and its four charge-pump capacitor connections must be placed according to the manufacturer's layout guidance.
How fast is the ADM202EARW RS-232 interface?
The ADM202EARW supports data rates up to 230 kbps. According to the Analog Devices manufacturer datasheet, the family conforms to the TIA/EIA-232-E and V.28 specifications and uses fast driver slew rates to support this throughput. The 230 kbps figure makes the device appropriate for legacy serial ports, embedded control links, and data-acquisition equipment, although cable length and system latency must still be considered independently.
Does the ADM202EARW need a negative power supply?
No. The ADM202EARW operates from a single +5 V supply and uses an on-chip charge pump to generate the approximately +10 V and -10 V levels required at the RS-232 driver outputs. The manufacturer describes this as an efficient design that permits charge-pump capacitors as small as 0.1 uF. Four external 0.1 uF capacitors are required, eliminating a separate negative rail in the host system.
What ESD protection does the ADM202EARW provide?
The ADM202EARW is specified for 15 kV air-gap discharge, 15 kV human-body-model discharge, and 8 kV contact-discharge protection. It is also described as EMI/EMC compliant and includes immunity to IEC 1000-4-4 fast-transient bursts. According to the manufacturer data, these protections improve robustness when cables connect the interface to external equipment, although they do not replace correct grounding, shielding, and connector practices.
What can replace the ADM202EARW on the same PCB footprint?
The closest documented upgrade paths are the original ADM202 wide-SOIC version and pin-compatible MAX202E and MAX232E devices in matching 16-lead wide-SOIC packages. The Analog Devices manufacturer datasheet specifically describes the ADM202E as a robust pin-compatible upgrade for ADM202, ADM232L, MAX202E, and MAX232E sockets. Final replacement approval should verify temperature grade, shutdown behavior, ESD rating, capacitor values, and production lifecycle status.
What is the best Analog Devices equivalent for ADM202EARW?
The original ADM202ARW is the closest same-manufacturer family alternative because it uses the same 16-lead wide-SOIC format and RS-232 interface function. The ADM202EARW adds the enhanced ADM202E positioning, including stronger documented ESD protection and operation up to 230 kbps. ADM202EARWZ is another manufacturer-listed ordering option, but it should be selected only after checking whether its suffix represents a meaningful ordering or packaging difference.
Is there a Maxim Integrated drop-in equivalent for ADM202EARW?
The MAX202EWE device is a documented cross-brand option for a matching 16-lead wide-SOIC RS-232 interface, and the Analog Devices manufacturer datasheet identifies MAX202E as a socket for which ADM202E provides a pin-compatible upgrade. The families are functionally close, including dual driver and receiver operation from a single 5 V rail, but shutdown, fault behavior, temperature range, and ESD performance should be compared before approving a substitution.
When should I choose ADM202EARW instead of MAX202EWE?
Choose the ADM202EARW when the interface is already designed around the ADM202E feature set, particularly its documented 15 kV air-gap and human-body-model ESD protection and 230 kbps operation. MAX202EWE is reasonable for a new cross-brand design when its electrical behavior, protection, and lifecycle satisfy the system requirements. Because both devices are associated with the same wide-SOIC socket family, the decision should be based on verified datasheet parameters rather than footprint compatibility alone.
Is ADM202EARW suitable for industrial serial-port equipment?
The ADM202EARW is suitable for many industrial serial-port designs because it supports 230 kbps, uses a single 5 V supply, and includes substantial ESD and EMC-related protection features. According to the Analog Devices manufacturer data, it meets TIA/EIA-232-E and V.28 requirements and supports IEC 1000-4-4 burst immunity. Industrial qualification still requires checking the exact temperature grade, isolation needs, cable length, and enclosure grounding strategy.
How should the ADM202EARW charge-pump capacitors be placed?
Place all four 0.1 uF charge-pump capacitors close to their corresponding ADM202EARW pins, using short traces and a compact ground return. Follow the capacitor connection and polarity details in the official Analog Devices datasheet rather than inferring them from the charge-pump block diagram. Tight placement limits switching-loop area and helps preserve low electromagnetic emissions and reliable operation at data rates up to 230 kbps.
Where can I buy ADM202EARW online?
Use the Request a Quote form on this XAIPART product page to request the ADM202EARW, current price, stock position, and lead time. The Request a Quote workflow can also confirm the exact package, tape-and-reel quantity, and production status for your order. This avoids relying on a static listing price that may not reflect the requested quantity or current inventory.
What is the price of ADM202EARW?
The current ADM202EARW price is best obtained through the Request a Quote form on this XAIPART product page. The submitted quantity determines the applicable pricing structure, so a single static figure would not reliably represent the product. The same form can confirm stock, lead time, and whether a tape-and-reel quantity break applies for your planned assembly run.
What is the lead time and stock status of ADM202EARW?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this XAIPART product page. Lead time can vary with order quantity, package form, and production conditions, so it should be confirmed for the specific commercial request. The form is also the appropriate route for checking uncut tape, cut tape, or other packaging availability.
Is ADM202EARW the same as MAX202EWE?
No, they are related RS-232 transceivers rather than identical products. The ADM202EARW is an Analog Devices ADM202E-family device with two transmitters, two receivers, a single 5 V supply, operation up to 230 kbps, and documented high-level ESD protection. MAX202EWE is a Maxim Integrated alternative in the matching wide-SOIC family, but shutdown, protection, temperature, and qualification details require direct comparison.

بيانات مرجعية هندسية لـ ADM202EARW — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADM202EARW when the design requires a dual RS-232 interface on a single 5 V rail and benefits from its documented 230 kbps operation, approximately +/-10 V charge-pump outputs, and enhanced ESD protection. ADM202ARW is appropriate for an existing ADM202-based design that does not require the enhanced ADM202E protection specification. MAX202EEWE and MAX202EWE are practical cross-brand choices for new wide-SOIC designs, but verify shutdown, logic levels, temperature grade, ESD ratings, and lifecycle status before release. MAX232EEWE may fit sockets designed around MAX232E behavior, but its enable and shutdown characteristics require careful comparison. In every case, package compatibility is necessary but not sufficient; the charge-pump network, connector protection, grounding, and operating-temperature requirements must also pass review.

المقارنة مع البدائل

المعامل هذا المنتج ADM202ARW ADM202EARWZ MAX202EEWE MAX202EWE MAX232EEWE
Package 16-lead wide SOIC 16-lead wide SOIC 16-lead wide SOIC 16-lead wide SOIC 16-lead wide SOIC 16-lead wide SOIC
Brand Analog Devices Analog Devices Analog Devices Maxim Integrated Maxim Integrated Maxim Integrated
Interface Function 2-channel RS-232 transceiver 2-channel RS-232 transceiver 2-channel RS-232 transceiver 2-channel RS-232 transceiver 2-channel RS-232 transceiver 2-channel RS-232 transceiver

أبرز الفروقات

  • Documented high-level ESD protection (مقابلADM202ARW)
  • Single-supply bipolar charge-pump implementation (مقابلMAX202EEWE)
  • Two complete RS-232 channels in one package (مقابلMAX232EEWE)

ملاحظات التصميم

Place the four external 0.1 uF charge-pump capacitors immediately adjacent to their associated ADM202EARW pins. Keep each capacitor connection short and use a low-impedance ground plane for the charge-pump return path. The manufacturer's on-chip charge-pump design can create approximately +/-10 V from a single 5 V supply, but long capacitor or ground traces increase loop area and can degrade electromagnetic-emissions performance. Confirm the exact pin and polarity assignments against the official pin-description table before routing the PCB.

Separate the RS-232 connector-side traces from sensitive logic and analog circuitry. Route driver outputs directly toward the connector and provide a continuous return path to the device ground. If the connector cable leaves the enclosure, combine a suitable shield strategy with chassis or signal grounding at the entry point. The ADM202EARW is rated for 15 kV air-gap and 15 kV human-body-model discharge, but those ratings complement rather than replace good cable and enclosure design.

Decouple the 5 V supply locally and keep the charge-pump capacitor return tied to the IC ground reference without introducing long current loops. Verify that the supply can support the average charge-pump load in addition to the host logic loads. The device operates from a single 5 V rail and generates approximately +/-10 V internally, so a separate negative supply is unnecessary. During validation, observe the 5 V rail and RS-232 outputs with additional margin for nearby switching converters.

Do not treat RS-232 as a long-distance balanced communication standard, and do not assume that a connector-side ground is automatically a low-noise signal ground. Confirm logic thresholds, driver input states, receiver output levels, temperature grade, and enable or shutdown behavior before substituting another transceiver. Although several devices use the same wide-SOIC footprint, footprint compatibility alone does not prove equivalent ESD, fault, or power-sequencing behavior.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The ADM202E family is identified as RoHS compliant. The interface is intended for industrial, instrumentation, and communications applications rather than AEC-Q100 automotive qualification.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ADM202EARW datasheet ADM202EARW datasheet pdf ADM202EARW pinout ADM202EARW equivalent ADM202EARW replacement ADM202EARW cross reference ADM202EARW 230 kbps ADM202EARW 5V RS-232 ADM202EARW 16-SOIC ADM202EARW ESD protection ADM202EARW vs MAX202EWE ADM202EARW industrial interface Analog Devices ADM202EARW ADM202EARW price ADM202EARW stock

المكونات والمصطلحات ذات الصلة

Analog Devices ADM202EARW ADM202E ADM202ARW ADM202EARWZ MAX202EEWE MAX202EWE MAX232EEWE RS-232 RS-232 transceiver line driver line receiver interface IC TIA/EIA-232-E V.28 charge pump single 5 V supply 230 kbps ESD protection EMI/EMC compliance 16-lead wide SOIC surface mount SMD industrial serial communication
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر