ADM202EARW - 230 kbps Dual RS-232 | Analog Devices
MPN: ADM202EARW ✓ 啟用中ADM202EARW 概覽
An RS-232 transceiver is an interface IC that converts low-voltage digital logic signals into differential bipolar voltage levels for serial data transmission, while converting received bipolar levels back into logic-compatible signals. The ADM202EARW combines two transmit channels and two receive channels in one package, making it a compact interface between a host controller and an RS-232 data link.
Key features include a single 5 V supply, a maximum data rate of 230 kbps, and approximately +/-10 V RS-232 output levels. The charge-pump design permits small 0.1 uF capacitors and eliminates the need for a separate negative supply. ESD protection is specified at 15 kV air-gap discharge, 15 kV human-body-model discharge, and 8 kV contact discharge. The device is also described as EMI/EMC compliant for use in electrically noisy equipment.
The internal architecture combines a charge-pump voltage converter, two line drivers, two receivers, and protection features in a single integrated circuit. Fast driver slew rates support reliable operation at data rates as high as 230 kbps. Because the transmitter generates bipolar RS-232 levels from one 5 V rail, system designers can use the same supply for logic and communications while simplifying the power-supply arrangement.
Typical applications include industrial serial-port equipment, data acquisition systems, test and measurement instruments, point-of-sale terminals, barcode scanners, and embedded systems that require short-distance RS-232 connectivity. It is particularly useful when two RS-232 ports share a limited board area but do not require galvanic isolation.
The four external charge-pump capacitors must be placed close to their associated pins, and unused receiver or driver inputs should be handled according to the manufacturer pin-description table. Decoupling and grounding practices also matter: keep the charge-pump return path compact, provide a low-impedance ground connection, and route the interface connector and logic circuitry to minimize noise coupling.
This page combines the manufacturer specifications, package and lifecycle information, cross-reference information, and practical integration guidance for engineers evaluating the ADM202EARW as a dual RS-232 interface solution.
直接替換替代品,適用於 ADM202EARW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADM202EARW (相同外形與佔位) — 差異在於 Interface Standard, Package, Product Type.
ADM202ARW
✅ 直接替換📋 參考替代品(不在目錄中)
ADM202EARWZ
✅ 直接替換聯絡詢價
查看資料表 →MAX202EEWE
✅ 直接替換📋 參考替代品(不在目錄中)
MAX202EWE
✅ 直接替換📋 參考替代品(不在目錄中)
MAX232EEWE
✅ 直接替換📋 參考替代品(不在目錄中)
ADM202EARW 規格
| Product Type | Dual RS-232 line driver/receiver transceiver |
| Number of Driver Channels | 2 channels |
| Number of Receiver Channels | 2 channels |
| 供應電壓 | 5 V |
| Maximum Data Rate | 230 kbps |
| RS-232 Output Levels | Approximately +10 V and -10 V |
| External Charge-Pump Capacitor | 0.1 uF |
| Number of Charge-Pump Capacitors | 4 capacitors |
| Interface Standard | TIA/EIA-232-E and V.28 |
| Air-Gap ESD Protection | 15 kV |
| Human-Body-Model ESD Protection | 15 kV |
| Contact Discharge ESD Protection | 8 kV |
| Fast Transient Burst Immunity | IEC 1000-4-4 |
| Electromagnetic Emissions | EN 55022 |
| 封裝 | 16-lead wide SOIC |
| 安裝類型 | Surface mount |
| Operating Supply | Single 5 V supply |
| RoHS 狀態 | Compliant |
ADM202EARW 16-lead wide soic 腳位配置指南
ADM202EARW(16-lead wide soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADM202EARW.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADM202EARW 適用於 6 應用s: Industrial Serial-Port Control, Data-Acquisition Equipment, Point-of-Sale Terminal Interface, Barcode and Card Reader, Test and Measurement Instrument, Embedded Serial Communication.
Industrial Serial-Port Control
The ADM202EARW fits industrial equipment that requires a compact two-port RS-232 interface for configuration, diagnostics, or service communications. Its single 5 V supply simplifies power design, while the on-chip charge pump produces approximately +10 V and -10 V without a separate negative rail. Two drivers and two receivers can support two serial links or provide transmit and receive paths on separate connectors. The 230 kbps maximum rate accommodates legacy supervisory protocols, while the documented 15 kV air-gap and 15 kV human-body-model ESD protection improves resilience to cable-borne transients in industrial environments.
推薦
Data-Acquisition Equipment
The ADM202EARW is appropriate for laboratory and industrial data-acquisition systems that must communicate with older instruments through RS-232. Its two receive channels can accept commands or measurements from two instruments, while its two transmit channels can provide separate control paths. The 230 kbps data rate is suitable for many legacy instrument protocols, and the 16-lead wide SOIC keeps the interface compact without requiring a separate negative supply. Four 0.1 uF charge-pump capacitors provide the required bipolar drive from a single 5 V source.
推薦
Point-of-Sale Terminal Interface
Point-of-sale terminals, receipt printers, scanners, and payment accessories often rely on RS-232 connectivity. The ADM202EARW provides two transmit and two receive channels in one 16-lead SOIC, allowing a controller to combine command and data paths without allocating multiple interface packages. Its single 5 V operation aligns with modern embedded logic rails, and the integrated charge pump removes the need for a negative voltage source. ESD protection is especially relevant when the interface reaches through an external connector and is exposed to user-contact transients.
推薦
Barcode and Card Reader
The ADM202EARW can serve as the host-side interface in barcode scanners, magnetic-card readers, and compact transaction terminals. These systems often need short, reliable serial links to a scanner or reader while keeping the PCB area limited. The 16-lead wide SOIC integrates two drivers and two receivers, while the 230 kbps rate is well above the throughput commonly required for character-oriented scanner traffic. Its 5 V-only operation simplifies the system power tree, and its documented ESD ratings help protect the interface from connector-borne discharge events.
推薦
Test and Measurement Instrument
The ADM202EARW is useful in test and measurement instruments that expose a legacy RS-232 control port to a host computer. A single package can provide both transmit and receive channels for command exchange, reducing board-space requirements compared with separate driver and receiver ICs. The charge-pump architecture creates the required approximately +/-10 V levels from a single 5 V rail, while the 230 kbps maximum rate supports many legacy control protocols. Careful charge-pump capacitor placement and grounding are essential to minimize emissions in precision or shielded laboratory equipment.
推薦
Embedded Serial Communication
The ADM202EARW fits embedded controllers that must bridge modern logic to an RS-232 port for service consoles, legacy controllers, or equipment networks. Its 5 V supply requirement is compatible with 5 V embedded systems, and its integrated charge pump avoids external inverter circuitry. Two full driver and receiver channels provide flexible port allocation, while the 16-lead SOIC remains easy to assemble and inspect. The interface should be paired with proper connector grounding, cable shielding, and short charge-pump traces to preserve low EMI and reliable 230 kbps operation.
推薦
推薦產品摘要
工程參考資料,適用於 ADM202EARW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADM202ARW | ADM202EARWZ | MAX202EEWE | MAX202EWE | MAX232EEWE |
|---|---|---|---|---|---|---|
| Package | 16-lead wide SOIC | 16-lead wide SOIC | 16-lead wide SOIC | 16-lead wide SOIC | 16-lead wide SOIC | 16-lead wide SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Interface Function | 2-channel RS-232 transceiver | 2-channel RS-232 transceiver | 2-channel RS-232 transceiver | 2-channel RS-232 transceiver | 2-channel RS-232 transceiver | 2-channel RS-232 transceiver |
主要差異化特點
- Documented high-level ESD protection (對比ADM202ARW)
- Single-supply bipolar charge-pump implementation (對比MAX202EEWE)
- Two complete RS-232 channels in one package (對比MAX232EEWE)
設計說明
Place the four external 0.1 uF charge-pump capacitors immediately adjacent to their associated ADM202EARW pins. Keep each capacitor connection short and use a low-impedance ground plane for the charge-pump return path. The manufacturer's on-chip charge-pump design can create approximately +/-10 V from a single 5 V supply, but long capacitor or ground traces increase loop area and can degrade electromagnetic-emissions performance. Confirm the exact pin and polarity assignments against the official pin-description table before routing the PCB.
Separate the RS-232 connector-side traces from sensitive logic and analog circuitry. Route driver outputs directly toward the connector and provide a continuous return path to the device ground. If the connector cable leaves the enclosure, combine a suitable shield strategy with chassis or signal grounding at the entry point. The ADM202EARW is rated for 15 kV air-gap and 15 kV human-body-model discharge, but those ratings complement rather than replace good cable and enclosure design.
Decouple the 5 V supply locally and keep the charge-pump capacitor return tied to the IC ground reference without introducing long current loops. Verify that the supply can support the average charge-pump load in addition to the host logic loads. The device operates from a single 5 V rail and generates approximately +/-10 V internally, so a separate negative supply is unnecessary. During validation, observe the 5 V rail and RS-232 outputs with additional margin for nearby switching converters.
Do not treat RS-232 as a long-distance balanced communication standard, and do not assume that a connector-side ground is automatically a low-noise signal ground. Confirm logic thresholds, driver input states, receiver output levels, temperature grade, and enable or shutdown behavior before substituting another transceiver. Although several devices use the same wide-SOIC footprint, footprint compatibility alone does not prove equivalent ESD, fault, or power-sequencing behavior.
合規資訊
The ADM202E family is identified as RoHS compliant. The interface is intended for industrial, instrumentation, and communications applications rather than AEC-Q100 automotive qualification.