Analog Devices

ADM3064EBRZ - 500 kbps RS-485 Transceiver | Analog Devices

MPN: ADM3064EBRZ ✓ نشط
3.0 V to 5.5 V Vdss 14-lead narrow-body SOIC Package
الحد الأدنى للطلب: 1 |

ADM3064EBRZ نظرة عامة

Analog Devices ADM3064EBRZ is a single-channel RS-485 transceiver with a maximum signaling rate of 500 kbps, a 50 Mbps maximum data rate rating, and bus-pin ESD protection of ±12 kV using the IEC 61000-4-2 contact-discharge method. The device operates from a 3.0 V to 5.5 V VCC supply and includes a 1.62 V to 5.5 V VIO logic supply range, all in a 14-lead narrow-body SOIC package.

An RS-485 transceiver is an interface IC that converts logic-level digital signals into differential bus signals and reconstructs digital data from a differential bus. The ADM3064EBRZ belongs to the interface IC hierarchy, combining a line driver, line receiver, and bus protection in one package. This integration supports bidirectional, half-duplex communication over long industrial cable runs while limiting the number of components required for a robust RS-485 node.

The principal benefits include operation across a 3.0 V to 5.5 V supply, a separate VIO domain from 1.62 V to 5.5 V, ±12 kV contact-discharge ESD protection on the bus pins, and a 14-lead SOIC footprint. The VIO supply allows the digital interface to operate at a lower voltage than the transceiver supply, which is useful when the host controller uses a 1.8 V or 2.5 V logic rail. The 500 kbps speed rating targets industrial control, instrumentation, building automation, and equipment networks rather than high-speed data-center protocols.

The ADM3064E family is designed for reliable single-ended data transmission in industrial environments. Its integrated protection helps reduce damage from electrostatic discharge encountered during cable installation or industrial electrical noise events. Although protection ratings describe defined test conditions, the bus network still requires appropriate grounding, shielding, cable termination, and surge-protection measures based on the installation environment.

Typical uses include industrial PLC communication, motor-control modules, factory sensor networks, building-control equipment, and external instrument connections. At each network node, the transceiver interfaces the host UART or controller through DI, RO, and control inputs while driving or receiving on the A and B differential pair. Termination and bias resistors are normally placed only where required by the topology rather than at every node.

For layout, place the transceiver and its local bypass capacitor close together, keep the A and B traces short and closely coupled, and provide a clear return path through the reference ground connection. Follow the Analog Devices pin-description table when assigning PCB tracks, and avoid routing bus signals beneath isolated high-voltage areas. Evaluate the complete bus for termination, common-mode voltage, cable length, and propagation delay.

This product page consolidates the ADM3064EBRZ electrical characteristics, package information, drop-in alternatives, application guidance, and design considerations into an engineering-focused reference. It also identifies which functions require separate protection or filtering, helping designers distinguish integrated bus protection from complete surge protection and external galvanic isolation.

بدائل مباشرة لـ ADM3064EBRZ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADM3064EBRZ (نفس عامل الشكل والبصمة) — يختلف في Package, Transceiver Configuration.

Analog Devices
Package: 14-lead SOIC, 0.154 inch (3.90 mm) width
Transceiver Configuration: 1/1 transceiver
قارن مع ADM3064EBRZ →

ADM3064EARZ

✅ بديل مباشر
Analog Devices
📦 14-lead narrow-body SOIC
1/1 transceiver · EIA-485 RS-485 · 1 driver and 1 receiver · 3.0 V to 5.5 V · 500 kbps · 50 Mbps · ±12 kV IEC ESD protected · 800 ns

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADM3064EBRZ المواصفات

Product Type RS-485 transceiver
Channel Count 1 channel
Maximum Signaling Rate 500 kbps
Maximum Data Rate 50 Mbps
VCC Operating Voltage Range 3.0 V to 5.5 V
VIO Operating Voltage Range 1.62 V to 5.5 V
Bus-Pin ESD Contact Discharge ±12 kV
ESD Test Method IEC 61000-4-2
العلبة 14-lead narrow-body SOIC
نوع التركيب Surface mount
Transceiver Configuration 1/1 full RS-485 transceiver
Supply Compatibility 3.0 V to 5.5 V
Logic Supply Option 1.62 V to 5.5 V VIO

دليل تكوين أطراف ADM3064EBRZ 14-lead narrow-body soic

تكوين الأطراف لـ ADM3064EBRZ (حزمة 14-lead narrow-body soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 14-lead narrow-body soic لـ ADM3064EBRZ

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADM3064EBRZ.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADM3064EBRZ مناسب لـ 6 التطبيقs: Industrial PLC Communication, Factory Sensor Network, Building Automation Controller, Motor Control Interface, Test and Measurement Instrument, External Data Acquisition Unit.

🏭

Industrial PLC Communication

The ADM3064EBRZ fits a PLC or remote I/O node that communicates through an RS-485 network at up to 500 kbps. Its 3.0 V to 5.5 V transceiver supply supports conventional industrial rails, while the 1.62 V to 5.5 V VIO range can connect to a lower-voltage controller. The ±12 kV IEC 61000-4-2 contact-discharge protection on the bus pins improves resilience to electrostatic discharge encountered during installation and maintenance. In a half-duplex design, the controller drives DI, monitors RO, and controls the transceiver while the A and B pair connects to the field bus.

🧩

Factory Sensor Network

The ADM3064EBRZ is appropriate for distributed sensors and condition-monitoring equipment connected to an industrial RS-485 backbone. A 500 kbps maximum signaling rate is suitable for polling-based networks carrying sensor commands and periodic measurements, while the separate VIO supply allows the digital side to match the sensor hub’s logic voltage. Bus-pin ESD protection of ±12 kV under IEC 61000-4-2 helps protect exposed field wiring. Designers should still place termination only at appropriate bus endpoints and evaluate biasing for networks that can become idle when all nodes stop transmitting.

🏠

Building Automation Controller

The ADM3064EBRZ can connect HVAC controllers, access-control panels, lighting gateways, and environmental sensors using an RS-485 backbone. Its 14-lead narrow-body SOIC package simplifies assembly into compact control boards, and the 500 kbps signaling rate accommodates typical building-management message traffic. The 1.62 V to 5.5 V VIO option is useful when the central controller uses a lower-voltage logic rail. For cables routed through building construction, retain the ±12 kV contact-discharge protection but determine whether additional surge arrestors, isolation, or shielding are needed for the installation.

⚡

Motor Control Interface

The ADM3064EBRZ is useful in motor-drive and inverter-support modules where a control processor communicates with remote drives, brakes, or position sensors over an RS-485 link. The 500 kbps rate provides sufficient bandwidth for setpoints, status, and diagnostic traffic without requiring a high-speed differential standard. Operating from 3.0 V to 5.5 V supports embedded industrial systems, while the separated VIO rail can simplify controller interfacing. Keep the A and B routing short, preserve a continuous ground reference, and evaluate the bus against the drive manufacturer’s grounding and termination recommendations.

🔧

Test and Measurement Instrument

The ADM3064EBRZ can serve as the isolated-by-cable-interface element in laboratory and field-test equipment that exchanges commands or measurement records with an RS-485 master. The 500 kbps signaling rate is suitable for command-oriented laboratory communication, and the separate 1.62 V to 5.5 V VIO supply supports processors operating below 3.3 V. The ±12 kV IEC 61000-4-2 contact-discharge rating protects the bus pins during repeated cable insertion. For bench instruments connected to unknown external cables, engineers should evaluate isolation, grounding, and additional surge protection based on the complete measurement system.

📡

External Data Acquisition Unit

The ADM3064EBRZ fits compact remote data-acquisition units that send sensor readings to a central controller over an RS-485 bus. Its 500 kbps signaling rate supports periodic multi-drop data collection, while the 3.0 V to 5.5 V supply and independent VIO domain support mixed-voltage logic partitioning. The integrated ±12 kV contact-discharge protection is valuable where the acquisition unit connects to long external sensor cables. The board designer should use low-divergence A and B routing, provide a solid reference-ground connection, and avoid placing termination resistors at every node because excessive termination can reduce the usable bus voltage.

ملخص المنتجات الموصى بها

ADM3064EARZ Analog Devices يُستخدم في: Industrial PLC Communication, Factory Sensor Network, Building Automation Controller, Motor Control Interface, Test and Measurement Instrument, External Data Acquisition Unit EVAL-ADM3064EEBZ Manufacturer evaluation board for the ADM3064E family يُستخدم في: Industrial PLC Communication, Factory Sensor Network, Building Automation Controller, Motor Control Interface, Test and Measurement Instrument, External Data Acquisition Unit
Where can I download the ADM3064EBRZ datasheet PDF?
The official ADM3064EBRZ datasheet PDF is available through the Analog Devices technical-document link for the ADM3061E through ADM3068E family. The document covers the 3.0 V to 5.5 V supply range, 1.62 V to 5.5 V VIO option, 500 kbps signaling rate, bus protections, electrical characteristics, and package information. Analog Devices also provides the ADM3064E product page and the EVAL-ADM3064EEBZ evaluation board for initial hardware assessment.
What is the operating voltage of ADM3064EBRZ?
The ADM3064EBRZ operates from 3.0 V to 5.5 V on VCC and from 1.62 V to 5.5 V on VIO. According to the Analog Devices ADM3064E datasheet, VIO provides a separate logic-supply domain for the digital interface. This permits a host controller with a lower supply voltage to communicate with the transceiver while the RS-485 side operates from the specified VCC range.
What is the maximum data rate of ADM3064EBRZ?
The ADM3064EBRZ is specified for a maximum signaling rate of 500 kbps, while the Analog Devices product listing also identifies a 50 Mbps maximum data-rate capability. These figures describe separate operating characteristics rather than interchangeable guarantees. For conventional RS-485 network design, use the 500 kbps signaling-rate limit when budgeting cable length, propagation delay, termination, and node timing.
What ESD protection does ADM3064EBRZ provide?
The ADM3064EBRZ provides ±12 kV contact-discharge ESD protection on its bus pins under the IEC 61000-4-2 test method. According to the Analog Devices ADM3064E datasheet, this protection applies specifically to external bus connections. It should not be treated as a substitute for surge protection, galvanic isolation, or an appropriately engineered cable shield in severe industrial environments.
What are the key specifications of ADM3064EBRZ that engineers should know?
The ADM3064EBRZ is a one-channel RS-485 transceiver with a 3.0 V to 5.5 V VCC range, a 1.62 V to 5.5 V VIO range, a 500 kbps maximum signaling rate, and ±12 kV IEC 61000-4-2 contact-discharge protection on the bus pins. It is packaged in a 14-lead narrow-body SOIC. These specifications position it for industrial, building-automation, instrumentation, and control-network interfaces.
Where can I find the ADM3064EBRZ pinout?
Use the pin-description and package-outline tables in the official Analog Devices ADM3064E datasheet to locate every ADM3064EBRZ pin. The manufacturer identifies the device in a standard 14-lead narrow-body SOIC_N footprint, and the EVAL-ADM3064EEBZ board uses the same footprint. The product page describes the evaluation board as providing connections for power, ground, digital input, digital output, and bus signals.
Is ADM3064EBRZ suitable for industrial RS-485 networks?
Yes, the ADM3064EBRZ is suitable for industrial RS-485 networks requiring a 500 kbps maximum signaling rate and protection against electrostatic discharge on external bus pins. Its 3.0 V to 5.5 V supply, 14-lead SOIC package, and ±12 kV IEC 61000-4-2 contact rating support robust node design. Additional surge protection may still be needed when the cable experiences lightning, switching spikes, or severe conducted transients.
What can replace the ADM3064EBRZ on the same PCB?
The ADM3064EARZ is the closest same-family candidate identified for the ADM3064EBRZ because both use the 14-lead SOIC footprint and belong to the ADM3064E RS-485 transceiver family. A mechanical footprint match does not by itself prove drop-in equivalence: check operating-temperature limits, supply behavior, logic-control polarity, fail-safe response, and bus-pin protection before substitution. No additional cross-brand part has been confirmed as pin-to-pin compatible from the available documentation.
Is the ADM3064EARZ the same as the ADM3064EBRZ?
The ADM3064EARZ and ADM3064EBRZ are closely related ADM3064E members in the same 14-lead SOIC package, but their suffix codes should not be assumed to represent identical temperature or qualification coverage. According to the manufacturer’s ordering information, suffix and packaging codes distinguish the commercial variants. Verify the complete ordering table, temperature grade, reel format, and production status before treating the two MPNs as interchangeable.
ADM3064EBRZ vs ADM3064EARZ: which is better for an industrial controller?
Choose ADM3064EBRZ when the required environmental grade or ordering code matches that variant, and choose ADM3064EARZ when the manufacturer’s ordering table confirms that its grade and protection meet the controller specification. Both parts are 14-lead ADM3064E-family RS-485 transceivers, so the PCB footprint is the same. The deciding factors are temperature range, qualification, availability, and exact electrical limits rather than package dimensions alone.
When should I choose ADM3064EBRZ over the ADM3064EARZ?
Choose ADM3064EBRZ when the ADM3064E variant specified in your bill of materials provides the required temperature grade, qualification, or exact ordering configuration. The ADM3064EARZ may be considered when the manufacturer’s ordering information confirms equivalent electrical behavior for the installed application. Because both use the same 14-lead SOIC footprint, the selection should be based on environmental ratings, lifecycle requirements, and supply continuity rather than PCB redesign.
Where to buy ADM3064EBRZ online?
Use the Request a Quote form on this page to request ADM3064EBRZ availability, current commercial terms, and quantity support. The quote request keeps the inquiry tied to the exact ADM3064EBRZ ordering code and 14-lead SOIC package. It is also the appropriate route for checking production allocation, scheduled delivery, and lot-related documentation before committing the component to an assembly build.
What is the price of ADM3064EBRZ?
Current commercial pricing for the ADM3064EBRZ is obtained through the Request a Quote form on this page. The form supports quantity-specific review and allows procurement to confirm supply status without embedding a static value that may become outdated. When submitting the request, include the required quantity, packaging format, target delivery date, and any lot-traceability or compliance documentation requirements.
What is the lead time for ADM3064EBRZ?
The current lead time and minimum order quantity for ADM3064EBRZ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production allocation, packaging configuration, and requested delivery date. For schedule-sensitive designs, request the confirmation before placing a blanket order and include the required ship-to date in the quotation request.
Is ADM3064EBRZ in stock?
ADM3064EBRZ stock status should be confirmed through the Request a Quote form on this page for the exact quantity and package configuration required by your design. A quotation response provides a transaction-specific availability check and delivery estimate. Engineers should also account for component allocation and assembly scheduling when the requested quantity changes or delivery is tied to a fixed production milestone.
What is the best cross-brand equivalent for ADM3064EBRZ?
No cross-brand drop-in replacement has been confirmed from the available manufacturer and distributor information. The ADM3064EARZ is the closest same-family 14-lead SOIC alternative, but an engineer must verify pin functions, temperature grade, fail-safe behavior, and ESD rating before substitution. Using the Analog Devices ADM3064E datasheet and its pin-description table is the safest way to establish that a candidate is truly pin-to-pin compatible.

بيانات مرجعية هندسية لـ ADM3064EBRZ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose ADM3064EBRZ when the design needs a one-channel RS-485 transceiver in a 14-lead SOIC package, requires a 500 kbps maximum signaling rate, and benefits from a 1.62 V to 5.5 V VIO interface alongside a 3.0 V to 5.5 V transceiver supply. Its ±12 kV IEC 61000-4-2 contact-discharge protection is valuable on exposed bus wiring, although surge and isolation requirements should be assessed separately. Consider ADM3064EARZ when the manufacturer’s ordering table confirms that its grade, temperature range, and electrical limits meet the application and the existing 14-lead footprint can be reused. Do not substitute solely because the package matches: verify DI, RO, driver-enable and receiver-control functions, fail-safe behavior, bus impedance, and production requirements against the ADM3064E datasheet before releasing a cross-reference into production.

المقارنة مع البدائل

المعامل هذا المنتج ADM3064EARZ
Brand Analog Devices Analog Devices
Package 14-lead narrow-body SOIC 14-lead narrow-body SOIC
Product Type RS-485 transceiver RS-485 transceiver
Channel Count 1 channel 1 channel
Maximum Signaling Rate 500 kbps 500 kbps
Temperature Grade B-grade variant E-grade variant

أبرز الفروقات

  • Separate low-voltage logic supply (مقابلADM3064EARZ)
  • Integrated bus-contact ESD protection (مقابلADM3064EARZ)
  • Industrial speed with compact logic integration (مقابلADM3064EARZ)

ملاحظات التصميم

Route the A and B bus conductors as a closely coupled differential pair, with substantially uniform spacing along the board and away from high-current switching paths. Connect the transceiver ground reference to the equipment ground using the layout arrangement specified by the Analog Devices application guidance. Avoid creating a large copper void under the device, and place local supply bypassing directly between the appropriate supply pins and ground to minimize high-frequency supply impedance.

Do not treat the integrated ±12 kV IEC 61000-4-2 contact-discharge rating as complete lightning or industrial-surge protection. Determine whether the external cable can receive larger surge events, and add appropriately rated protection when required. Likewise, place termination at the physical ends of the bus and use bias resistors only when the network needs defined idle state. Incorrect termination or excessive loading can reduce differential voltage and cause unreliable communication.

For a 500 kbps bus, evaluate propagation delay across the complete network rather than relying only on nominal cable length. Keep transceiver enable and receive-control timing synchronized with UART framing, account for bus turnaround delay in half-duplex communication, and use a differential receiver with hysteresis. If the cable crosses large ground-potential differences, add isolation rather than relying on the transceiver’s internal ESD protection.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer product page and product listings were used for functional, electrical, and package information. A definitive component-specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration was not identified in the available documentation.

تم التحقق من البيانات في: 2026-11-19 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ADM3064EBRZ datasheet ADM3064EBRZ datasheet pdf ADM3064EBRZ pinout ADM3064EBRZ equivalent ADM3064EBRZ replacement ADM3064EBRZ vs ADM3064EARZ ADM3064EBRZ SOIC-14 ADM3064EBRZ RS-485 interface ADM3064EBRZ industrial communication Analog Devices ADM3064EBRZ ADM3064EBRZ price ADM3064EBRZ stock

المكونات والمصطلحات ذات الصلة

Analog Devices ADM3064EBRZ ADM3064EARZ ADM3064E RS-485 RS-485 transceiver interface IC differential bus half-duplex communication 500 kbps 3.0 V to 5.5 V 1.62 V to 5.5 V ±12 kV ESD protection IEC 61000-4-2 14-lead narrow-body SOIC SOIC_N surface mount industrial control building automation data acquisition VIO logic supply DI input RO output
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر