ADS574KP-2 - 12-Bit 40 kSPS SAR ADC | Texas Instruments
MPN: ADS574KP-2 ✓ نشطADS574KP-2 نظرة عامة
An ADC is a data-acquisition IC that converts an analog voltage into a digital code for processing by a microcontroller, microprocessor, DSP, or industrial controller. The ADS574 belongs to the parallel-output ADC family, with the SAR architecture performing conversion through a capacitor-based DAC and successive comparison. Within the broader hierarchy, it is an ADC and data converter within the mixed-signal and analog IC categories, while its internal reference, clocking, sampling, and digital interface reduce the number of external components required.
The principal features are 12-bit resolution, one analog input, a 40 kSPS conversion rate, and operation from a 4.5 V to 5.5 V supply. Internal sampling eliminates the external sample-and-hold circuitry needed in many earlier ADC574 designs. The microprocessor-compatible interface simplifies connection to parallel bus systems, while low-power CMOS construction supports compact industrial and instrumentation designs. The device is also described as a drop-in replacement for ADC574 models in most applications.
The ADS574 uses a successive-approximation conversion architecture implemented with a capacitor array, or CDAC. At each conversion, the internal conversion network compares the sampled input against successive internally generated reference levels. The resulting 12-bit code is transferred through the parallel output interface after the conversion status indicates that the result is ready. A single +5 V supply supports the core converter and associated interface functions, while the 25 µs maximum acquisition-and-conversion specification defines the timing budget available for sampling a new input.
Typical applications include industrial process monitoring, laboratory instrumentation, digital voltmeter and panel-meter designs, embedded control systems, and legacy ADC574-compatible data-acquisition equipment. It is especially useful where a parallel microprocessor interface and deterministic sampling interval are more important than compactness or ultrahigh conversion speed. Engineers should also account for the older parallel architecture when designing around modern serial-interface ADCs, because wiring count, bus timing, and software handling differ substantially.
For PCB implementation, route the analog input and reference-related signals away from digital clock and output traces, provide the decoupling and bypass capacitance specified by the manufacturer datasheet, and treat the parallel output bus as a high-speed digital interface. Confirm that the host processor supports the required logic levels and conversion-control handshake. The 28-pin PDIP package is also less compact than modern leadless packages, which should be considered for space-constrained new designs.
This product page combines the manufacturer specifications with practical selection guidance, interface considerations, verified drop-in candidates, and design notes for engineers evaluating the ADS574KP-2 in ADC574-compatible industrial, instrumentation, and embedded-control systems.
بدائل مباشرة لـ ADS574KP-2 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ADS574KP-2 (نفس عامل الشكل والبصمة) — يختلف في Maximum Acquisition and Conversion Time, Package, Internal Clock, Internal Reference.
ADS574KP
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADS574KE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADC574
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ADS574KP-2 الحدود القصوى والخصائص الكهربائية
| الدقة | 12 bit |
| Analog Input Count | 1 input |
| Conversion Architecture | Successive approximation (SAR) |
| Maximum Sampling Rate | 40 kSPS |
| Maximum Acquisition and Conversion Time | 25 us |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| العلبة | 28-pin PDIP |
| نوع التركيب | Through-hole |
| Output Interface | Parallel microprocessor-compatible interface |
| Sampling | Internal sample-and-hold |
| Internal DAC Implementation | Capacitor array (CDAC) |
| Process Technology | Low-power CMOS |
| Legacy Compatibility | Drop-in replacement for ADC574 models in most applications |
| Performance Guarantee | Guaranteed AC and DC performance |
| حالة RoHS | Compliant |
دليل تكوين أطراف ADS574KP-2 28-pin pdip
تكوين الأطراف لـ ADS574KP-2 (حزمة 28-pin pdip). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADS574KP-2.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ADS574KP-2 مناسب لـ 6 التطبيقs: Industrial Process Monitoring, Digital Panel Meters, Laboratory Instrumentation, Embedded Control Systems, Legacy ADC574 Equipment, Data Acquisition and Control.
Industrial Process Monitoring
The ADS574KP-2 fits industrial process-monitoring designs that require a deterministic parallel ADC input and a 12-bit result rather than a high-channel-count converter. Its 40 kSPS maximum sampling rate and 25 µs maximum acquisition-and-conversion time define the minimum interval between new samples. The internal sampling function simplifies the analog front end, while the parallel bus connects readily to older PLC, controller, or embedded-control architectures. Designers should preserve the manufacturer’s input, reference, bypass, and grounding layout and verify that the -2 operating grade covers the enclosure temperature.
موصى به
Digital Panel Meters
The ADS574KP-2 is suitable for digital panel-meter and digital voltmeter designs where a microprocessor directly reads a parallel 12-bit conversion result. The single analog input can monitor one scaled sensor signal, and the 40 kSPS maximum rate permits responsive meter updates. Its single +5 V supply operation can simplify system partitioning when the panel already uses 5 V logic. The main design constraint is the parallel data interface: the host processor must allocate 12 data pins plus conversion-control and status pins, and the PCB must keep analog routing separated from digital bus transitions.
موصى به
Laboratory Instrumentation
The ADS574KP-2 can serve as the acquisition ADC in laboratory instruments that sample a conditioned analog measurement at a controlled rate. A 12-bit resolution provides 4096 digital codes, while the 40 kSPS maximum rate supports moderately sampled measurements such as temperature, pressure, or slowly varying process signals. The internal sampling circuit removes the external sample-and-hold stage often required with ADC574-class components. For low-level instrumentation, engineers should pay particular attention to input conditioning, grounding, reference stability, and the acquisition timing specified by the manufacturer datasheet.
موصى به
Embedded Control Systems
The ADS574KP-2 is appropriate for embedded control and legacy data-acquisition systems built around a microprocessor with a parallel bus. The device combines a 12-bit SAR converter, internal sampling, clocking, and microprocessor interface in one 28-pin PDIP package. This integration reduces the external sample-and-hold requirement and supports a direct processor read sequence. The implementation trade-off is bus wiring: unlike a serial-interface ADC, the converter requires 12 output lines and dedicated control connections, so processor pin availability should be checked before schematic capture.
موصى به
Legacy ADC574 Equipment
The ADS574KP-2 is particularly relevant to equipment built around the ADC574 class of parallel converters. The manufacturer datasheet identifies ADS574 as a drop-in replacement for ADC574 models in most applications, with internal sampling, lower power consumption, and single +5 V operation. This enables targeted modernization where mechanical compatibility and the processor bus must be preserved. Engineers should still compare input ranges, interface timing, logic levels, reference implementation, and acquisition behavior of the installed ADC574 against the ADS574KP-2 datasheet before making a drop-in production change.
موصى به
Data Acquisition and Control
The ADS574KP-2 fits compact data-acquisition and supervisory-control subsystems that need one conditioned analog measurement channel and a processor-readable digital result. A 40 kSPS maximum conversion rate supports repeated measurements, while the 25 µs maximum acquisition-and-conversion interval provides a predictable conversion window. The 28-pin PDIP package is practical for through-hole industrial boards and can facilitate repair or replacement in legacy systems. Keep the analog trace short, provide the specified supply bypass, and observe the manufacturer’s guidance for the parallel output lines to prevent switching noise from corrupting the measured input.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ADS574KP-2 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ADS574KP | ADS574KE | ADC574 |
|---|---|---|---|---|
| Package | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | National Semiconductor |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| Conversion Architecture | Successive approximation (SAR) | Successive approximation (SAR) | Successive approximation (SAR) | Legacy ADC574 converter |
| Analog Input Count | 1 input | 1 input | 1 input | 1 input |
| Maximum Sampling Rate | 40 kSPS | 40 kSPS | 40 kSPS | 40 kSPS |
| Sampling Circuit | Internal sample-and-hold | Internal sample-and-hold | Internal sample-and-hold | External or legacy ADC574 sampling arrangement |
| Processor Interface | Parallel microprocessor-compatible interface | Parallel microprocessor-compatible interface | Parallel microprocessor-compatible interface | Parallel microprocessor interface |
أبرز الفروقات
- Integrated sampling simplifies the ADC574-class acquisition circuit (مقابلADC574)
- Same 12-bit SAR conversion performance within the ADS574 family (مقابلADS574KP)
- Alternative suffix grades use the same parallel converter architecture (مقابلADS574KE)
ملاحظات التصميم
Place the input, reference, and bypass connections according to the manufacturer datasheet and keep the analog input trace short. Route the 12 parallel data lines away from the sensitive input node, especially when the processor or external circuitry switches simultaneously with conversion. A continuous ground plane under the converter and its analog network reduces loop area and helps prevent digital return current from modulating the sampled voltage.
Establish the processor read sequence around the conversion-status signal and allow the full 25 µs maximum acquisition-and-conversion time before treating the output as valid. Account for propagation delay across the parallel bus when defining setup and hold timing. The 12-bit result bus creates a substantial number of switching edges, so series damping or other bus-conditioning techniques may be appropriate in systems with long traces or fast edge rates.
Operate the converter from a single supply within the documented 4.5 V to 5.5 V range. Place the manufacturer-recommended bypass capacitors close to the supply and ground pins, using the smallest practical loop. Check the supply’s settling behavior when conversion starts because the 40 kSPS maximum rate and 25 µs maximum conversion interval can expose insufficient supply decoupling. Confirm that logic and bus pull-up requirements match the processor interface.
Do not treat the ADS574KP-2 and ADC574 as interchangeable without reviewing input range, logic levels, reference behavior, timing, and acquisition circuits. The manufacturer describes ADS574 as a drop-in replacement for ADC574 models in most applications, but “most applications” leaves room for exceptions. Likewise, verify the operating-temperature implications of the -2 suffix and do not substitute another suffix solely because the package drawing is identical.
معلومات الامتثال
The product listing identifies the exact ADS574KP-2 as RoHS compliant. No automotive qualification is stated for this device.